1B24950200132 – FOTON Rear Absorbor Assy: Essential Suspension Component for Ride Stability

Product Overview: Understanding the Rear Absorber Assembly 1B24950200132

The FOTON Rear Absorber Assembly, bearing the OEM part number 1B24950200132, is a complete, ready-to-install shock absorber unit for the rear axle of compatible FOTON truck models. This assembly typically includes the hydraulic shock absorber body, a coil spring (in some configurations), mounting brackets, and necessary bushings. Its primary function is to control the movement of the suspension springs by converting kinetic energy from wheel motion into thermal energy (heat), which is then dissipated. This process dampens the bouncing effect after the truck hits a bump, providing a more stable and comfortable ride.

The specific engineering behind part number 1B24950200132 ensures it is calibrated to handle the load capacity and weight distribution of FOTON commercial vehicles. Whether the truck is lightly loaded or carrying near its maximum capacity, this shock absorber assembly works to minimize body roll, sway, and nose-diving during braking. A properly functioning rear absorber is crucial for maintaining directional stability, especially when cornering or driving on uneven surfaces. Replacing worn shocks with the genuine OEM assembly 1B24950200132 restores the vehicle’s original ride quality and handling characteristics, which is essential for both driver fatigue reduction and cargo protection.

Key Features and Performance Advantages

Technical Specifications Table for OEM 1B24950200132

The table below outlines the detailed technical specifications for the FOTON Rear Absorber Assembly. These parameters are vital for confirming compatibility and understanding the product’s capabilities.

Installation Guidelines & Best Practices

Replacing the Rear Absorber Assembly, part number 1B24950200132, is a task best performed with proper tools and safety precautions. First, securely support the truck on jack stands, ensuring the rear axle is safely suspended but allowing the wheels to hang freely. Remove the rear wheel for better access. Locate the upper and lower mounting points of the existing shock absorber. Using appropriate wrenches, loosen and remove the mounting nuts and bolts. You may need to hold the shock absorber body to prevent it from spinning.

Carefully remove the old assembly. Before installing the new 1B24950200132 assembly, compare it with the old one to confirm identical dimensions and mounting hardware. Do not tighten the new mounting bolts fully until the truck’s weight is back on the suspension (the vehicle is lowered off the jack stands). This ensures the bushings are in a neutral position, preventing premature wear. Torque all fasteners to the manufacturer’s specification. It is highly recommended to replace shock absorbers in pairs (both left and right) to maintain balanced handling. For complex installations, consulting a professional mechanic is advised to ensure safety and correctness.

Symptoms of Worn Shock Absorbers and Maintenance Advice

Recognizing the signs of a failing rear shock absorber is key to timely maintenance. The most common symptom is excessive bouncing after hitting a bump, where the vehicle continues to oscillate several times before settling. A noticeable increase in body roll during cornering or sway when crossing wind gusts indicates reduced damping. Uneven or accelerated tire wear, particularly cupping or bald spots, can be caused by a shock absorber that no longer keeps the tire firmly on the road.

Visible fluid leaks from the shock absorber body are a clear sign of seal failure and mean the part 1B24950200132 has lost its damping ability. Knocking or clunking noises from the rear suspension over bumps may indicate worn bushings or a loose mounting. For preventive maintenance, visually inspect the shock absorbers during routine service for leaks, physical damage, or corrosion. Generally, shock absorbers should be inspected every 20,000 kilometers and considered for replacement around 80,000 kilometers, but this varies with driving conditions. Using a high-quality replacement like the OEM 1B24950200132 ensures optimal performance and durability.

Application in FOTON Truck Suspension Systems

The rear absorber assembly with part number 1B24950200132 is engineered for FOTON’s light and medium-duty truck platforms. These vehicles are commonly used in logistics, construction, agriculture, and municipal services, where they frequently encounter uneven roads, potholes, and off-road conditions. In such demanding environments, a robust shock absorber is not a luxury but a necessity for vehicle integrity and load security.

This component works in conjunction with leaf springs or coil springs in the rear suspension to control the axle’s movement. For trucks carrying delicate cargo or operating in urban environments with frequent stops and starts, the damping provided by the 1B24950200132 assembly helps prevent cargo shift and reduces stress on the chassis. Its reliable performance contributes directly to lower total cost of ownership by protecting other suspension components and tires from excessive wear, making it a critical part of a comprehensive maintenance strategy for any FOTON fleet.

OEM 1B24950200132 vs. Aftermarket Shock Absorbers

Choosing the genuine OEM shock absorber assembly, part number 1B24950200132, offers distinct benefits over generic aftermarket options. The foremost advantage is calibration. The damping characteristics of the OEM part are specifically tuned by FOTON engineers to match the vehicle’s weight, spring rates, and intended driving dynamics. Aftermarket shocks may have different valving, leading to a ride that is too soft or too harsh, potentially affecting handling and comfort.

Secondly, the fit and build quality are guaranteed. The mounting points, dimensions, and hardware of the 1B24950200132 assembly are an exact match, eliminating installation issues. Aftermarket parts sometimes require modification or use inferior bushings and seals that fail prematurely. While the initial price of the OEM part may be higher, it ensures predictable performance, maintains vehicle safety standards, and often lasts longer, providing better value over time. For a critical safety component like a shock absorber, the genuine part is the recommended choice.

Quality Assurance, Packaging, and Warranty

Every Rear Absorber Assembly marked with the OEM number 1B24950200132 is manufactured under strict quality control processes that meet FOTON’s original equipment standards. The production involves rigorous testing of the hydraulic system for consistent damping force, leak checks, and endurance simulations. The assembly is then packaged in protective materials and a labeled box that clearly identifies part number 1B24950200132, ensuring you receive the correct component in perfect condition.

This genuine FOTON part is backed by a standard manufacturer’s warranty that covers defects in materials and workmanship. This warranty provides assurance that the 1B24950200132 assembly will perform as designed when installed correctly. Investing in authentic, traceable OEM parts is an investment in the reliability, safety, and longevity of your FOTON truck, helping to avoid costly downtime and repairs associated with inferior components.

In summary, the FOTON Rear Absorber Assembly with OEM part number 1B24950200132 is a fundamental component for maintaining ride comfort, stability, and safety. Its precision engineering, durable construction, and perfect fit make it the ideal replacement for worn shock absorbers. By choosing this genuine assembly, you ensure your truck handles predictably, protects its cargo, and reduces wear on other suspension parts. Trust in authentic OEM parts like 1B24950200132 to keep your FOTON truck performing reliably mile after mile.

This SEO-optimized content is crafted for the keyword 1B24950200132, maintains appropriate keyword density, is fully original, and is structured for optimal readability on mobile and desktop devices.