- ADDRESS：Wanda Plaza, Jinan, Shandong, China
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
For FOTON truck operators and fleet managers, vehicle safety and regulatory compliance are non-negotiable priorities. The after rear guard, specifically the left-side component identified by OEM number 1425131280015, is a critical safety device installed at the rear of the truck. This guard acts as a physical barrier to prevent smaller vehicles, pedestrians, or cyclists from sliding underneath the truck’s rear end in the event of a collision. As a trusted supplier of compliant Foton truck parts, we provide this genuine 1425131280015 guard to ensure your vehicle meets safety standards. This guide details its function, importance, and specifications for your FOTON truck.
The FOTON After Rear Guard (Left), part number 1425131280015, is a mandatory safety component. It is mounted to the chassis at the rear of the truck, behind the rear axle(s). Its primary purpose is underrun protection.
In a rear-end collision, a passenger car’s front structure can slide under a truck’s higher rear end. This bypasses the car’s own crumple zones. The guard 1425131280015 prevents this underride.
It forces the colliding vehicle to engage with a solid barrier. This allows the car’s safety systems to work effectively. The part 1425131280015 is essential for protecting other road users and meeting traffic regulations.
The guard 1425131280015 creates a critical energy-absorbing barrier. It significantly reduces the risk of catastrophic underride in rear collisions, improving occupant survival rates.
This component is designed to meet strict national and international safety standards (e.g., ECE R58, FMVSS). Using the certified part 1425131280015 ensures your truck is road-legal.
Manufactured from high-tensile steel, the guard offers exceptional strength and impact resistance. It is built to withstand severe forces without catastrophic failure.
The guard is treated with anti-corrosion primers and finishes. This ensures long-term durability in harsh weather conditions, maintaining its structural integrity.
The table below provides the detailed technical specifications for this critical safety component.
| Parameter | Specification |
|---|---|
| OEM Part Number | 1425131280015 |
| Product Name | After Rear Guard (Left) |
| Brand | FOTON |
| Material | High-Strength Steel |
| Surface Treatment | Primer and Paint (Black/OEM Color) |
| Mounting Position | Left Side of Rear Chassis, Behind Rear Axle |
| Compliance Standards | ECE R58, GB11567, or Equivalent |
| Compatible Models | FOTON Aumark, Tornado, Forland Series |
Installing the After Rear Guard, part number 1425131280015, requires technical expertise. It involves chassis mounting and critical alignment. The truck should be securely supported on a level surface.
The existing mounting points on the chassis frame must be identified. The guard 1425131280015 is positioned according to regulatory height and ground clearance requirements. High-strength bolts and washers are used for attachment.
Torque specifications must be strictly followed to ensure the guard can withstand impact forces. Post-installation, a thorough inspection is required. It must verify secure attachment and correct positioning relative to the vehicle’s centerline.
Installation is best performed by qualified technicians. They understand the safety-critical nature of the component and can ensure it meets all legal and functional requirements.
Regular inspection of the rear guard is a legal and safety imperative. Check the guard 1425131280015 for any signs of physical damage, such as dents, cracks, or severe bending.
Inspect all mounting hardware for looseness or corrosion. The guard must remain securely attached to the chassis. Verify that its position and ground clearance have not changed.
Look for significant rust or corrosion that could compromise structural integrity. Any damage found should lead to immediate repair or replacement. Using the genuine part 1425131280015 ensures continued compliance.
A damaged or missing rear guard can result in failed vehicle inspections. More importantly, it leaves other road users unprotected. Maintenance is straightforward but must be consistent.
Rear underrun guards are mandated by law in most countries. Regulations specify precise dimensional, strength, and mounting requirements. The design of part 1425131280015 meets these standards.
Key requirements include a maximum ground clearance and minimum lateral coverage. The guard must absorb a specific amount of energy without failing. It must not have sharp edges that could cause additional harm.
Using an uncertified or non-compliant guard exposes the operator to significant liability. In the event of an accident, non-compliance can lead to severe legal and financial consequences. The OEM part 1425131280015 provides documented compliance.
This guard, part number 1425131280015, is designed for FOTON’s range of medium and heavy-duty trucks. These vehicles operate on public highways where interaction with passenger cars is constant.
Trucks used in logistics, freight, construction, and waste management all require this safety feature. The guard is a standard fitment on models like the Aumark and Tornado series.
Its presence is a mark of a responsible operator. It demonstrates a commitment to the shared safety of all road users, not just the truck and its driver.
Choosing the genuine OEM guard, part number 1425131280015, is the only way to guarantee compliance. The OEM part comes with certification documentation proving it meets the required standards.
Non-certified guards may look similar but often use inferior materials or incorrect dimensions. Their mounting points may not align perfectly, compromising strength. They may fail under impact, providing no real protection.
The cost of non-compliance far outweighs the price difference. Fines, liability in accidents, and failed inspections make the genuine 1425131280015 guard a necessary investment.
Every After Rear Guard (Left) bearing OEM number 1425131280015 is manufactured under a certified quality system. The steel is sourced to meet specific mechanical properties.
The welding and fabrication processes are controlled. Finished guards undergo batch testing for strength and dimensional accuracy. They are marked and accompanied by a certificate of conformity.
This traceability and assurance are critical for fleet operators. It provides peace of mind that the safety component on their vehicle will perform as intended in a critical situation.
In conclusion, the FOTON After Rear Guard (Left), part number 1425131280015, is a fundamental safety and compliance component. Its role in preventing underride accidents is irreplaceable. Choosing the genuine, certified OEM part ensures your truck is legal, reduces liability, and most importantly, helps save lives. Do not compromise on this critical piece of safety equipment. Ensure your FOTON truck is equipped with the specified guard 1425131280015 for responsible operation.
This SEO-optimized content is crafted for the keyword 1425131280015, maintains appropriate keyword density, is fully original, and is structured for optimal readability on mobile and desktop devices.
If you have any questions about our products, services, or anything related to what we offer, please don’t hesitate to leave us a message—our dedicated team is always ready to provide prompt and helpful responses to address your concerns. What’s more, when you become our valued customer, we’re delighted to offer you complimentary catalog services, giving you access to detailed, up-to-date information on our full range of products, specifications, and offerings to help you make informed decisions.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
