- ADDRESS：Wanda Plaza, Jinan, Shandong, China
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
Ensuring the safety and reliability of your commercial vehicle requires high-quality Foton truck parts. The OEM component 1417035600053, known as the Four-Circuit Protection Valve, is a critical device designed specifically for FOTON trucks to manage and safeguard the air brake system. This valve plays a pivotal role in isolating different brake circuits, ensuring that a failure in one section does not compromise the entire braking capability. By choosing the genuine 1417035600053, you invest in a component that guarantees system integrity, compliance with safety standards, and optimal performance for your heavy-duty vehicle.
Four-Circuit Protection Valve
Четырехконтурный защитный клапан
Válvula de protección de cuatro circuitos
The 1417035600053 Four-Circuit Protection Valve is a fundamental component within the air brake systems of modern FOTON trucks. Its primary function is to distribute compressed air from the reservoir to four independent brake circuits while providing crucial protection. If a pressure drop or failure occurs in one circuit, this valve automatically isolates it, allowing the remaining three circuits to maintain full braking power. This design is essential for vehicle and driver safety, especially under heavy load conditions. The component identified by 1417035600053 is built to FOTON’s exacting standards for durability and reliability.
This valve is engineered to handle the high-pressure demands of commercial trucking. It ensures consistent air supply to the front axle, rear axle, parking brake, and auxiliary systems. The 1417035600053 is a testament to advanced hydraulic and pneumatic safety engineering. For fleet managers and technicians, understanding the role of this part is key to preventative maintenance. Regular inspection of the valve, identifiable by its OEM number 1417035600053, should be part of any comprehensive service schedule.
The valve 1417035600053 operates on a simple yet brilliant principle of pressure differential management. Under normal conditions, it allows unrestricted air flow to all four circuits. Each circuit is protected by an internal check valve and pressure-sensing mechanism. When the system detects a significant leak or pressure loss in one line, the corresponding section within 1417035600053 seals itself off.
This isolation prevents the compromised circuit from draining air from the healthy ones. Consequently, the truck retains a majority of its braking ability, allowing the driver to bring the vehicle to a controlled stop. The design of the 1417035600053 often includes visual indicators or pressure ports for diagnostics, enabling mechanics to quickly identify which circuit has failed during troubleshooting procedures.
Enhanced System Safety: The primary advantage of the 1417035600053 is its fail-safe design. By compartmentalizing the brake system, it ensures that a single point of failure does not lead to a total brake loss. This is a critical safety feature mandated in modern commercial vehicles.
Precise Pressure Regulation: This valve maintains balanced pressure across all four circuits under normal operation. It ensures that each axle receives the correct air pressure for proportional braking, contributing to vehicle stability and controlled stopping distances.
Robust Construction: Manufactured from high-grade aluminum alloys or hardened polymers, the 1417035600053 resists corrosion and withstands constant vibration. Its seals are made from nitrile or similar compounds designed for long life in harsh environments.
Quick Response Time: The internal mechanisms of the 1417035600053 are designed for instantaneous reaction to pressure changes. This rapid response is vital for maintaining system pressure and driver confidence during a partial failure event.
Compact and Integrated Design: Despite its critical function, the valve 1417035600053 is engineered to be compact, simplifying installation and integration into the often-crowded chassis of a FOTON truck.
The 1417035600053 is not an optional accessory; it is a core component of a truck’s Active Safety System. It directly supports the functionality of the foundation brakes, anti-lock braking systems (ABS), and sometimes even advanced driver-assistance systems (ADAS) that rely on stable air pressure. A malfunctioning protection valve can lead to uneven braking, increased stopping distances, or complete circuit failure.
Compliance with international transportation safety regulations often requires such redundancy in brake systems. The use of a certified OEM part like 1417035600053 helps fleet operators meet these legal requirements and pass mandatory periodic vehicle inspections. Its reliability is a non-negotiable aspect of responsible fleet management and duty of care.
The Four-Circuit Protection Valve bearing the OEM number 1417035600053 is designed for a wide range of FOTON commercial vehicles. This includes heavy-duty tractor units, dump trucks, and medium-duty cargo trucks equipped with full air brake systems. It is a standard component in models like the FOTON Auman and Aumark series where safety and payload capacity are paramount.
When sourcing a replacement, it is crucial to match the exact part number 1417035600053. Using an incorrect or generic valve can lead to improper pressure settings, compatibility issues with other brake system components, and potential safety hazards. The valve is typically located near the air reservoirs on the truck’s chassis for easy access during maintenance.
Replacing the 1417035600053 valve is a task for a qualified technician familiar with air brake systems. Safety is paramount: the vehicle must be parked on a level surface, the parking brake applied, and the air system fully drained of pressure before any work begins.
Installation Summary:
1. Deplete all air pressure from the reservoirs and ensure the system is safe to work on.
2. Clearly label all air lines connected to the old valve before disassembly to ensure correct reconnection.
3. Remove the faulty valve and clean the mounting surface.
4. Install the new 1417035600053 valve using appropriate seals and torque specifications.
5. Reconnect all air lines according to the labels and diagram (if provided).
6. Perform a thorough system leak-down test and check the cut-in and cut-out pressures of the valve.
7. Conduct a full brake system functional test before returning the vehicle to service.
It is highly recommended to bench-test the new 1417035600053 valve before installation if possible, to verify its pressure settings. Always refer to the official FOTON service manual for the specific vehicle model for detailed procedures and torque values.
Routine maintenance of the 1417035600053 involves visual inspection for external damage, corrosion, or oil leaks. During regular service intervals, the air dryer should be serviced, as contaminated air (with oil or moisture) is a primary cause of internal valve failure. The valve itself has no serviceable internal parts; if diagnosed as faulty, the entire unit 1417035600053 must be replaced.
Common symptoms of a failing valve include:
Uneven braking between axles.
Slow pressure build-up in one or more circuits.
Air leaks audible near the valve body.
Warning lights on the dashboard related to brake pressure.
The service life of the 1417035600053 is typically long, often lasting several hundred thousand kilometers. However, it is directly impacted by the quality of air system maintenance. Proactive replacement as part of a major overhaul can prevent roadside breakdowns.
The following table details the primary technical parameters for the FOTON Four-Circuit Protection Valve, OEM number 1417035600053.
| Parameter | Specification |
|---|---|
| OEM Part Number | 1417035600053 |
| Brand | FOTON |
| Product Name | Four-Circuit Protection Valve |
| Type | Multi-Circuit Protection Valve |
| Number of Protected Circuits | 4 |
| Maximum Operating Pressure | 12 Bar (approx. 174 PSI) |
| Setting Pressure (Cut-in) | 6.5 – 7.0 Bar (Model Specific) |
| Material (Body) | Aluminum Alloy |
| Connection Type | Push-on fittings or Threaded Ports |
| Primary Application | FOTON Heavy & Medium-Duty Trucks with Air Brakes |
Selecting the authentic OEM part 1417035600053 over generic alternatives is a decision that prioritizes safety and reliability. Genuine FOTON components are engineered and tested as part of the complete vehicle system. The 1417035600053 valve will have precisely calibrated pressure settings that match your truck’s original design specifications, ensuring seamless integration with the compressor, reservoirs, and brake chambers.
Non-OEM valves may have subtle differences in flow characteristics, response time, or pressure thresholds that can degrade overall system performance. Furthermore, the material quality and sealing technology in the genuine 1417035600053 are validated for durability under the specific operating conditions of FOTON trucks. The risk of premature failure and the associated downtime cost far outweigh the minimal initial savings from a counterfeit part.
Q: Can I drive my truck if the Four-Circuit Protection Valve (1417035600053) is faulty?
A: No. A malfunctioning protection valve compromises the redundancy of the brake system. Driving with a suspected faulty valve is dangerous and illegal in most jurisdictions. The vehicle should be repaired immediately.
Q: How often should the valve 1417035600053 be inspected?
A: It should be visually checked during every routine maintenance interval (e.g., every 30,000 km). Its function is indirectly tested whenever the brake system’s pressure build-up and leak-down rates are measured.
Q: Does replacing the 1417035600053 require special tools?
A: Basic wrenches and air line coupling tools are typically sufficient. However, a pressure gauge set is essential to verify the system and valve pressures after installation.
Q: What is the main difference between a 4-circuit and a 3-circuit valve?
A: A 4-circuit valve (like 1417035600053) protects an additional circuit, often for auxiliary equipment or a tag axle. The choice is determined by the vehicle’s brake system design. Using the incorrect type can leave parts of the braking system unprotected.
Q: Where can I find the valve with part number 1417035600053 on my truck?
A: It is usually mounted on the chassis frame rail, near the air tanks. Follow the main air line from the reservoir; it will lead to the protection valve.
The 1417035600053 Four-Circuit Protection Valve is a quintessential safety component in the air brake system of your FOTON truck. Its role in isolating faults and preserving braking capability during a partial failure is invaluable. Opting for the genuine OEM part ensures that this critical safety net performs exactly as designed by the vehicle’s engineers.
For fleet managers, maintenance chiefs, and owner-operators, specifying the 1417035600053 for repairs and overhauls is a sound policy. It safeguards your drivers, your cargo, your vehicle, and other road users. This component, while small, embodies the principle that in commercial vehicle safety, there is no room for compromise. Trust in the original engineering and choose the 1417035600053 for guaranteed performance and peace of mind on every journey.
This comprehensive guide has detailed the function, importance, and specifications of the FOTON Four-Circuit Protection Valve. For further technical assistance or to source this authentic part, consult with authorized FOTON parts distributors or reputable commercial vehicle component specialists.
If you have any questions about our products, services, or anything related to what we offer, please don’t hesitate to leave us a message—our dedicated team is always ready to provide prompt and helpful responses to address your concerns. What’s more, when you become our valued customer, we’re delighted to offer you complimentary catalog services, giving you access to detailed, up-to-date information on our full range of products, specifications, and offerings to help you make informed decisions.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
