SANY Reverse Signal Lights Set 60211865: Reliable Illumination for Safe Vehicle Maneuvering

Clear communication and visibility are fundamental to safe heavy-duty truck operation, especially during reversing maneuvers in low-light conditions or congested areas. The genuine 60211865 Reverse Signal Lights Set is a complete, ready-to-install lighting solution engineered by SANY to provide bright, reliable rearward illumination and clear indication of vehicle intent. As an essential safety component within the trusted portfolio of authentic SANY parts, this two-piece light set plays a dual critical role: it serves as a powerful white backup light to illuminate the path behind the vehicle, and as an amber or red turn signal indicator to communicate directional changes.

Choosing the OEM part 60211865 ensures perfect compatibility with your SANY truck’s electrical system, provides the durability to withstand harsh operating environments, and helps maintain compliance with road safety regulations, thereby protecting personnel, property, and the vehicle itself.

Reverse Signal Lights – (Set – 2 Nos)

Фонари заднего хода и сигнальные (комплект 2 шт.)

Luces de Marcha Atrás y Señalización (Juego de 2)

Dual-Purpose Functionality and Safety Importance

The SANY Reverse Signal Lights Set, part number 60211865, integrates two vital lighting functions into a single, robust housing. The primary function is the reverse light, which activates automatically when the vehicle’s transmission is shifted into reverse gear. This emits a bright, white light designed to illuminate the immediate area behind the truck, allowing the driver to see obstacles, personnel, or uneven terrain during nighttime or low-visibility reversing operations. This is crucial for preventing accidents and enabling precise maneuvering.

The secondary function is the turn signal (or in some configurations, a combination turn signal and brake/tail light). This uses a bright amber or red LED or bulb to provide a highly visible, flashing indication of the driver’s intention to turn or change lanes. The set 60211865 ensures that both lights on either side of the vehicle are perfectly matched in color, intensity, and flash rate, providing consistent, unambiguous signals to other road users. This dual functionality consolidates critical lighting, simplifies vehicle wiring, and ensures a cohesive appearance at the rear of the vehicle.

Advanced Lighting Technology and Rugged Construction

The genuine 60211865 light set is built to deliver reliable performance in the demanding environment of commercial trucking. The housing is typically constructed from high-impact polycarbonate or durable thermoplastic, resistant to cracking from vibration, stone chips, and UV degradation. The lens is made from clear or colored polycarbonate, designed to be optically efficient and highly scratch-resistant. A critical seal, often a rubber gasket combined with ultrasonic welding or a high-grade adhesive, protects the internal components from moisture, dust, and road spray, ensuring the longevity of the 60211865.

Technical Specifications: Reverse Signal Lights Set 60211865

The table below details the key technical parameters for the SANY Reverse Signal Lights Set. This data is essential for verifying the correct application, electrical compatibility, and performance characteristics for your vehicle.

Installation and Electrical Connection Guide

Replacing the Reverse Signal Lights with the genuine 60211865 set is a straightforward procedure. First, disconnect the vehicle’s battery to prevent short circuits. Remove the old light assembly by unscrewing the mounting bolts/nuts from inside the frame or bumper. Disconnect the electrical plug. Clean the mounting surface to ensure a flat, debris-free seat for the new light’s gasket. Position the new light from the 60211865 set, aligning the mounting holes. Secure it with the provided or original fasteners, tightening evenly to compress the gasket without over-torquing and cracking the housing.

Connect the new light’s plug to the vehicle’s wiring harness. It is crucial to verify the wiring connection matches the function: typically, one wire is for the reverse light (activated by the reverse gear switch) and another for the turn signal (connected to the turn signal circuit). Using a circuit tester before final connection is recommended. After installing both lights, reconnect the battery and test all functions: activate the turn signals left and right, then shift into reverse (with ignition on and engine off, if possible, and area clear) to check the white backup lights. Ensure both lights in the 60211865 set operate identically and brightly.

Common Failure Symptoms and Maintenance Practices

Failure of a light in the 60211865 set is usually apparent. The most obvious symptom is one or both functions (reverse or turn signal) not illuminating. This could be caused by a burned-out bulb (in halogen versions), a failed LED module, corrosion in the connector, or a broken wire. Intermittent operation often points to a poor electrical connection or internal moisture damage. Physical damage, such as a cracked lens or broken housing, is also a clear sign that the unit is compromised and allows water ingress, which will quickly lead to electrical failure.

Preventative maintenance involves regular visual inspections. During pre-trip checks or routine servicing, ensure both lights in the 60211865 set are clean, intact, and free of moisture inside the lens. Have an assistant activate all functions while you observe their operation. Check for consistent brightness and flash rate. Inspect the wiring and connector for fraying or corrosion. Cleaning the lens regularly with a soft cloth and mild cleaner maintains maximum light output. It is highly recommended to replace these combination lights in pairs (the complete 60211865 set) to ensure uniform appearance and performance, as light output degrades over time even if the unit hasn’t completely failed.

Key Benefits of the Genuine SANY Light Set 60211865

Conclusion: An Essential Investment in Safety and Compliance

The SANY Reverse Signal Lights Set, OEM number 60211865, is a critical safety component that actively contributes to accident prevention. Its dual functionality addresses two of the most important aspects of vehicle communication: illuminating blind spots and signaling intent. In an industry where safety is paramount, maintaining these lights in optimal condition is not just a maintenance task but a core responsibility.

Therefore, specifying the genuine 60211865 set for replacement is a direct investment in operational safety, regulatory compliance, and professional vehicle presentation. It is the definitive choice for fleet managers, owner-operators, and technicians who prioritize safety, reliability, and maintaining the integrity of their SANY truck’s lighting systems. Trust the OEM part to deliver the precise fit, superior durability, and reliable performance that meets the stringent demands of commercial use.