- ADDRESS：Wanda Plaza, Jinan, Shandong, China
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
Maintaining precise engine temperature is fundamental to the performance and longevity of any heavy-duty truck. The genuine 160801040062A Radiator Tank is a critical cooling system component engineered by SANY to serve as the primary reservoir and expansion chamber for engine coolant. As a fundamental element within the trusted lineup of authentic SANY parts, this tank is designed to withstand the thermal cycles and pressure fluctuations inherent in demanding commercial vehicle operations.
The 160801040062A ensures a constant supply of coolant to the radiator, accommodates thermal expansion, and provides a sealed environment to maintain system pressure. Choosing the OEM part 160801040062A guarantees a perfect fit, material compatibility with modern coolants, and the structural integrity required to prevent leaks and overheating, safeguarding your engine from costly thermal damage.
Radiator Tank
Бачок радиатора
Tanque del Radiador
The SANY Radiator Tank, part number 160801040062A, is an integral component of the closed-loop cooling system. Its primary function is to provide a reserve of coolant to compensate for contraction and expansion as engine temperature varies. When the engine heats up, coolant expands and flows into the tank, preventing excessive pressure build-up in the radiator core. As the engine cools, coolant is drawn back from the tank into the radiator, ensuring the system remains completely full and free of air pockets that can cause hotspots and inefficient cooling.
Furthermore, the 160801040062A serves as a central point for system maintenance. It typically houses the coolant level sensor and provides the filler neck for adding coolant. The design of the tank, including its pressure cap, helps maintain the cooling system at an optimal pressure (usually above atmospheric pressure), which raises the boiling point of the coolant. This is essential for modern high-efficiency diesel engines that operate at higher temperatures. A failure of the tank, such as a crack or a failed seal, compromises the entire system’s pressure, leading to boil-over, coolant loss, and inevitable engine overheating.
The genuine 160801040062A Radiator Tank is manufactured from high-grade, glass-reinforced polyamide (nylon) or polyethylene plastic. These materials are selected for their exceptional combination of strength, thermal resistance, and chemical stability. They can withstand continuous exposure to hot coolant (up to 130°C or more) and the internal pressures of a sealed cooling system without deforming, cracking, or degrading. The material is also resistant to corrosion and electrolysis, which can plague metal tanks, ensuring a long service life for the 160801040062A.
The table below details the essential technical parameters for the SANY Radiator Tank. This data is crucial for verifying the correct application and ensuring compatibility with your vehicle’s specific cooling system layout and capacity requirements.
| Parameter | Specification |
|---|---|
| OEM Part Number | 160801040062A |
| Product Name | Radiator Tank |
| Brand | SANY |
| Primary Material | Glass-Reinforced Polyamide (Nylon) / Polyethylene |
| Capacity | Application Specific (e.g., 3 Liters) |
| Pressure Rating | Designed for Standard System Pressure (e.g., 1.1 Bar) |
| Temperature Resistance | Up to 130°C Continuous |
| Included Ports | Filler Neck, Overflow, Main Inlet/Outlet, Sensor Port |
| Primary Application | SANY Truck Engine Cooling System (Expansion Tank) |
Replacing the Radiator Tank 160801040062A is a straightforward process but requires attention to detail to ensure a leak-free and air-free cooling system. Begin by allowing the engine to cool completely to avoid scalding and system pressure. Place a drain pan underneath, and carefully open the drain valve on the radiator or disconnect the lower radiator hose to drain a portion of the coolant. Disconnect the overflow hose, any sensor electrical connector, and the main coolant hoses attached to the old tank. Remove the mounting bolts or brackets holding the tank in place.
Install the new genuine 160801040062A tank using the reverse procedure. Ensure all hose connections are clean and use new spring clamps or hose clips for a secure seal. It is critical to refill the cooling system with the correct type and mix of coolant as specified by SANY. After refilling, the system must be properly bled of air. This often involves running the engine with the heater on and the radiator cap off (or using a spill-free funnel) until the thermostat opens and all air bubbles are purged. Finally, top up the coolant in the new 160801040062A tank to the “Cold Full” mark, install the pressure cap, and check for leaks after the engine reaches operating temperature.
A failing Radiator Tank 160801040062A presents several clear warning signs. The most obvious symptom is a visible coolant leak originating from the tank itself, often from cracks, a damaged filler neck, or seepage around hose connections. A tank that has lost its structural integrity may bulge or distort under pressure. Coolant loss will lead to frequent low coolant warnings and eventual engine overheating. Another sign is the presence of coolant in the overflow reservoir even when the engine is cold, indicating the tank’s internal valve or the pressure cap may be faulty, preventing coolant return.
Preventative maintenance is key. During every routine service, visually inspect the 160801040062A tank for cracks, discoloration (which can indicate material degradation), and mineral deposits around seams or caps. Check the condition and tightness of all hoses and clamps. Replace the pressure cap at recommended intervals, as a failed cap is a common cause of tank-related pressure problems. Always use the recommended coolant type, as incorrect chemistry can degrade the plastic over time. Catching issues early with the 160801040062A can prevent catastrophic engine overheating.
The genuine 160801040062A is manufactured to the exact dimensions and port configurations of the original. This guarantees a hassle-free installation where all hoses align correctly, the tank fits the mounting brackets perfectly, and sensors connect without modification, ensuring system integrity from the start.
Constructed from engineered plastics formulated to resist heat, pressure, and coolant chemicals, the 160801040062A offers superior longevity compared to generic tanks. It withstands thermal cycling without becoming brittle, preventing the sudden cracks and failures common in inferior parts.
By maintaining a perfect seal and correct system pressure, the 160801040062A tank ensures the cooling system operates at peak efficiency. This prevents boil-overs, maintains optimal engine temperature for fuel efficiency and emissions control, and provides accurate coolant level monitoring.
The SANY Radiator Tank, OEM number 160801040062A, is far more than a simple plastic container; it is a pressurized, engineered component critical to the thermal management of your truck’s engine. Its failure can lead directly to engine overheating, one of the most costly and damaging failures for a diesel engine. Ensuring this component is in perfect condition is a fundamental aspect of preventative maintenance.
Therefore, specifying the genuine 160801040062A for replacement is a smart, proactive investment in vehicle reliability and uptime. It is the definitive choice for fleet managers, technicians, and owner-operators who understand that the cooling system’s integrity hinges on the quality of every component. Trust the OEM part to deliver the fit, performance, and durability required to keep your SANY truck running cool and efficient under all operating conditions.
Never open the radiator or expansion tank cap when the engine is hot. The cooling system is under pressure, and escaping steam or hot coolant can cause severe burns. Always allow the engine to cool completely before performing any service. Use appropriate personal protective equipment (PPE) including gloves and safety glasses. Dispose of used coolant responsibly according to local environmental regulations, as it is toxic. Ensure the cooling system is bled of all air after replacing the 160801040062A tank to prevent overheating.
If you have any questions about our products, services, or anything related to what we offer, please don’t hesitate to leave us a message—our dedicated team is always ready to provide prompt and helpful responses to address your concerns. What’s more, when you become our valued customer, we’re delighted to offer you complimentary catalog services, giving you access to detailed, up-to-date information on our full range of products, specifications, and offerings to help you make informed decisions.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
