- ADDRESS：Wanda Plaza, Jinan, Shandong, China
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The stability and precise handling of heavy machinery are paramount for both safety and operational efficiency. The genuine 131699000051A Stabilizer Lock Bush Assembly from SANY is a critical suspension component engineered to optimize the performance of the anti-roll bar system. As a durable and precision SANY parts, this assembly ensures a firm, play-free connection between the stabilizer bar and the vehicle’s chassis or axle. It directly combats excessive body roll during cornering and on uneven terrain, translating to improved driver control, reduced component stress, and enhanced tire contact. Choosing the OEM part 131699000051A is essential for maintaining the designed suspension kinematics and ensuring long-term reliability under demanding load conditions.
Stabilizer Lock Bush Assy
Сборочный узел втулки стабилизатора
Conjunto de Buje de Bloqueo del Estabilizador
The primary role of the Stabilizer Lock Bush Assembly 131699000051A is to securely house and position the stabilizer bar (sway bar) while allowing it to perform its essential function. The stabilizer bar itself is a torsion spring that connects opposite sides of the suspension. During cornering, the chassis tends to roll, forcing one wheel up and the other down. This twists the stabilizer bar, which generates a counteracting force to resist the roll and keep the vehicle more level.
The 131699000051A assembly is the critical interface in this system. It consists of a high-strength bracket or clamp and an inner bushing that grips the bar. This assembly must firmly lock the bar in its lateral position while permitting the rotational twisting motion with minimal binding. A worn or failed assembly, unlike part 131699000051A, creates excessive clearance, leading to audible clunks, imprecise handling, and reduced effectiveness of the entire anti-roll system, compromising vehicle stability and safety.
The SANY Stabilizer Lock Bush Assembly 131699000051A is engineered as a complete, ready-to-install unit to ensure perfect compatibility and performance. Its construction typically involves multiple components working in concert, each made from materials selected for specific properties. The outer bracket or clamp is commonly fabricated from stamped or forged steel, providing the necessary tensile strength to withstand high dynamic loads without flexing or fracturing.
The design is a balance of rigid constraint and controlled flexibility. The genuine 131699000051A is the product of extensive testing to find the optimal bushing durometer (hardness) and bracket design for SANY’s specific vehicle dynamics, ensuring predictable handling characteristics.
The table below details the comprehensive technical specifications for the SANY Stabilizer Lock Bush Assembly. This data is essential for correct parts identification, ensuring compatibility, and informing maintenance procedures.
| Parameter | Specification |
|---|---|
| OEM Part Number | 131699000051A |
| Product Name | Stabilizer Lock Bush Assembly |
| Brand | SANY |
| Composition | Bracket/Clamp, Bushing, Hardware |
| Bushing Material | Polyurethane or Oil-Resistant Rubber |
| Bracket Material | Pressed or Forged Steel |
| Stabilizer Bar Diameter | [Example: 32mm] *Model Specific |
| Mounting Type | Bolts to Chassis/Axle Bracket |
| Torque Specification | Refer to SANY Service Manual |
| Application | SANY Truck/Crane Front/Rear Stabilizer Bar |
Replacing the Stabilizer Lock Bush Assembly 131699000051A is a critical suspension service. The vehicle must be safely supported, typically with the weight off the suspension to relieve tension from the stabilizer bar. The old assembly is unbolted, and the stabilizer bar is carefully cleaned at the contact point to remove old rubber residue, rust, or debris that could affect the fit of the new bushing.
The new genuine 131699000051A assembly is positioned onto the bar. It is crucial to orient it correctly according to any markings and to ensure it seats fully against any stops or shoulders on the bar. The bracket is then aligned with the mounting holes on the chassis. The supplied high-tensile bolts must be installed and tightened in a cross pattern to the exact torque specification provided by SANY. Under-torquing can allow movement and cause wear; over-torquing can distort the bracket or crush the bushing, altering its dynamic properties and leading to premature failure.
A failing Stabilizer Lock Bush Assembly will present clear symptoms. The most common is a distinct knocking or clunking sound from the front or rear of the vehicle when driving over bumps or during low-speed turns, caused by the bar moving within the worn bushing. Drivers may also report a vague or “floaty” feeling during cornering, increased body roll, or a slight change in steering response.
Proactive maintenance is highly effective. During routine service inspections, visually check the assembly 131699000051A for cracks in the bushing, excessive dryness (weather checking), or signs that the bushing has separated from its metal sleeve. If the assembly has a grease fitting, it should be lubricated with the correct type of grease at intervals specified in the manual. Replacing the assembly in pairs (both left and right) is recommended to maintain balanced handling characteristics.
The genuine 131699000051A is engineered to SANY’s exacting dimensional and performance standards. It ensures the stabilizer bar is positioned and secured precisely as intended, preserving the original suspension geometry and designed handling feel, which is often compromised by universal-fit parts.
Made with high-quality, consistent materials, the OEM bushing provides optimal damping of vibrations and prevents metal-to-metal contact. This eliminates the annoying clunks and squeaks associated with worn bushings, leading to a quieter and more refined operation.
The superior rubber/polyurethane compound in part 131699000051A is formulated to resist hardening, cracking, and oil absorption under extreme conditions. This results in a significantly longer service interval compared to aftermarket alternatives, reducing downtime and life-cycle costs.
The SANY Stabilizer Lock Bush Assembly with OEM number 131699000051A is a fundamental component for maintaining the integrity and performance of the vehicle’s anti-roll system. It is a direct contributor to stable, predictable handling, which is non-negotiable for the safe and efficient operation of heavy machinery. While often overlooked until it fails, its role in connecting the suspension and chassis is critical.
Opting for the genuine 131699000051A assembly ensures that your equipment maintains its factory-level stability, safety, and driver confidence. It represents a smart, cost-effective maintenance decision that protects more expensive suspension components and avoids the hidden costs of poor handling. For fleet managers and equipment owners committed to peak performance and safety, this OEM assembly is the definitive and reliable choice.
The stabilizer bar system, secured by the 131699000051A assembly, is a key safety-related component. Worn or incorrect bushings can alter the vehicle’s roll stiffness and handling balance, especially under emergency maneuvers. Always replace worn assemblies promptly and use a torque wrench to ensure fasteners are tightened to the manufacturer’s specification. For optimal safety, have the wheel alignment checked after replacing suspension components that affect geometry.
If you have any questions about our products, services, or anything related to what we offer, please don’t hesitate to leave us a message—our dedicated team is always ready to provide prompt and helpful responses to address your concerns. What’s more, when you become our valued customer, we’re delighted to offer you complimentary catalog services, giving you access to detailed, up-to-date information on our full range of products, specifications, and offerings to help you make informed decisions.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
