- ADDRESS：Wanda Plaza, Jinan, Shandong, China
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The A5002080106 Haudraulic Cylinder is a vital actuation component engineered specifically for BEIBEN trucks, designed to convert hydraulic fluid power into linear mechanical force and motion for various lifting, tilting, or steering applications. This genuine part plays a critical role in systems such as dump body hoists, cab tilts, or other hydraulic mechanisms. As a premier supplier of Beiben truck parts, we offer this high-quality cylinder that meets exact original equipment specifications. The A5002080106 component is constructed with precision-machined parts, robust seals, and a durable barrel, ensuring reliable performance under high pressure and demanding cycles, directly contributing to the functionality and productivity of BEIBEN commercial vehicles.
Haudraulic Cylinder
Гидравлический цилиндр
Cilindro Hidráulico
The Haudraulic Cylinder with OEM number A5002080106 is a key linear actuator used in various hydraulic systems on BEIBEN trucks. Its fundamental operation involves a piston moving within a cylindrical barrel, driven by pressurized hydraulic fluid. This movement, either extending or retracting the piston rod, generates substantial force to perform work, such as lifting a dump body, tilting a cab, or operating a crane arm. The design and construction of the A5002080106 are tailored to withstand the high pressures, shock loads, and continuous cycles typical in commercial vehicle applications.
This component is essential for vehicle utility and operational efficiency. A malfunctioning or leaking A5002080106 cylinder can lead to system failure, loss of load-holding capability, or unsafe operation. For BEIBEN truck operators, ensuring the integrity of this cylinder through proper maintenance and timely replacement with genuine parts like the A5002080106 is crucial for minimizing downtime and maintaining productivity. The cylinder exemplifies BEIBEN’s engineering focus on durability and reliability in critical hydraulic components, ensuring they perform consistently in tough working environments.
Heavy-Duty Construction: The A5002080106 cylinder features a high-strength steel barrel, a precision-ground piston rod, and durable end caps, engineered to handle high working pressures and resist bending or buckling under load.
Advanced Seal Technology: Equipped with multi-lip seals and wipers made from high-grade polyurethane or nitrile rubber, the cylinder provides excellent leak prevention, contaminant exclusion, and long service life even with constant movement.
High Load Capacity: Designed with an appropriate bore and rod diameter, the A5002080106 generates significant force, making it suitable for demanding lifting and pushing tasks common in truck applications.
Smooth and Reliable Operation: The precision machining of internal components ensures smooth piston travel, minimal friction, and consistent performance cycle after cycle, contributing to system control and efficiency.
Corrosion and Wear Resistance: Critical surfaces like the piston rod are often chrome-plated for hardness and corrosion resistance, while the barrel interior may be honed and treated to prevent scoring and wear.
The benefits of selecting the genuine A5002080106 cylinder are substantial for operational reliability. Its robust design minimizes the risk of catastrophic failure, which could lead to expensive repairs and prolonged vehicle downtime. Fleet managers appreciate the predictable performance and extended service intervals associated with OE-quality hydraulic components. Furthermore, by maintaining proper sealing and structural integrity, the A5002080106 ensures efficient hydraulic system operation, which can improve overall system response time and reduce strain on the hydraulic pump. Investing in this genuine part is an investment in sustained functionality and lower total cost of ownership.
The table below details the core technical parameters for the A5002080106 Haudraulic Cylinder. These specifications are vital for understanding its performance capabilities and ensuring correct system integration.
| Parameter | Value / Description | Details |
|---|---|---|
| OEM Number | A5002080106 | Original Equipment Manufacturer Code |
| Product Name | Haudraulic Cylinder | Linear hydraulic actuator |
| Brand | BEIBEN | Manufacturer brand |
| Cylinder Type | Tie-Rod or Welded Design | Common construction for truck applications |
| Bore Diameter | Model-Specific (e.g., 80mm, 100mm) | Internal diameter of the cylinder barrel |
| Stroke Length | According to Application | Maximum travel distance of the piston rod |
| Rod Diameter | Proportional to Bore Size | Diameter of the extending piston rod |
| Maximum Working Pressure | Up to 200 Bar (approx. 2900 PSI) | Rated hydraulic pressure capacity |
| Mounting Style | Clevis, Trunnion, or Flange | Attachment method to the machine frame |
| Compatibility | BEIBEN Truck Hydraulic Systems | Specific models and applications |
These specifications define the operational envelope of the A5002080106 component. The bore diameter and working pressure directly determine the force output of the cylinder. The stroke length must match the required range of motion for the specific application, such as the full height of a dump body lift. The mounting style is critical for correct installation and alignment to prevent side-loading, which can damage the cylinder. When replacing a hydraulic cylinder, matching these exact OEM specifications as provided by the A5002080106 is essential for ensuring system performance, safety, and longevity.
The A5002080106 Haudraulic Cylinder is designed for specific hydraulic functions on BEIBEN trucks. Its most common applications include operating the hoist mechanism on dump trucks, controlling the cab tilting system for engine access, or acting as an actuator in specialized equipment like crane loaders or refuse truck compactors. The cylinder is integrated into a hydraulic circuit that includes a pump, control valves, fluid reservoir, and connecting hoses.
System compatibility is paramount for the A5002080106. It must match the hydraulic system’s pressure rating, flow requirements, and fluid type. Its physical dimensions—including collapsed and extended lengths, mountings, and port sizes—must align with the space and linkage geometry on the specific BEIBEN truck model. Using this genuine OE part ensures that all these parameters are correct, preventing issues like inadequate force, improper speed, mechanical binding, or connection failures. Always verify the OEM number A5002080106 against the vehicle’s service manual or parts catalog to confirm its intended application.
Extension Cycle: Pressurized hydraulic fluid is directed to the piston’s “cap end” port. The fluid pressure acts on the piston surface area, creating a force that pushes the piston rod outward, extending the cylinder and performing work (e.g., lifting a load).
Retraction Cycle: Fluid flow is switched to the “rod end” port. Because the piston area on the rod side is smaller (due to the rod occupying space), a different force/speed characteristic is achieved as the rod retracts. Fluid from the cap end is pushed back to the tank.
Force Calculation: The theoretical force output of the A5002080106 cylinder is determined by the formula: Force = Pressure x Area. The bore diameter defines the area, so a larger bore generates more force at the same system pressure.
Load Holding: When fluid ports are blocked by the control valve, the seals within the A5002080106 prevent internal leakage, allowing the cylinder to hold its position and support a static load safely.
Understanding this principle is key to troubleshooting. If a dump body sags slowly, it could indicate worn piston seals in the A5002080106 allowing internal leakage. If the cylinder moves sluggishly, it may be due to insufficient fluid flow or pressure, or external binding. The reliable operation of the A5002080106, ensured by its quality construction, is fundamental for systems where controlled movement and holding force are critical for safety and function.
Installing the A5002080106 Haudraulic Cylinder requires careful attention to detail. First, ensure the hydraulic system is completely depressurized. Support the load mechanically (e.g., secure the dump body with blocks). Disconnect and cap the hydraulic hoses from the old cylinder. Remove the mounting pins or bolts. Install the new A5002080106 cylinder, aligning the mounting points precisely to avoid imposing side loads. Reconnect the hydraulic hoses to the correct ports (cap end and rod end).
After installation, it is crucial to prime the system and bleed any air. Air in the hydraulic lines or cylinder can cause spongy operation, noise, and damage. Slowly operate the cylinder through its full stroke several times, cycling the fluid and allowing trapped air to escape back to the reservoir. Check all connections for leaks with the system at operating pressure. Due to the high forces involved and the critical nature of hydraulic safety, this installation is best performed by a technician experienced with BEIBEN truck hydraulic systems.
Regular maintenance of the A5002080106 cylinder and its associated hydraulic system prolongs its life. Key practices include using clean, correct-specification hydraulic fluid, maintaining clean filters, and keeping rod wipers in good condition to prevent contaminant ingress. Periodically inspect the cylinder for external damage, rod scoring, and fluid leaks around the rod gland or ports. Check mounting hardware for tightness.
Common signs of a failing A5002080106 cylinder include: visible hydraulic fluid leaks (external leakage); an inability to hold a load, causing drift (internal leakage past seals); a scored or pitted piston rod; uneven or jerky movement; and unusual noises during operation. If the rod is bent, the cylinder must be replaced immediately, as it is a safety hazard. Proactive replacement of seals during major overhauls can prevent unexpected failures. Always use genuine seal kits designed for the A5002080106 to ensure compatibility.
Choosing a genuine BEIBEN hydraulic cylinder like the A5002080106 is an investment in safety, reliability, and performance. OE cylinders are engineered to meet precise force, speed, and durability requirements for the specific vehicle application. Their materials, heat treatment, machining tolerances, and seal compounds are validated through testing. The A5002080106 is designed to integrate seamlessly with other system components, ensuring optimal efficiency and longevity.
Using non-genuine or generic cylinders introduces significant risks. These parts may have inferior metallurgy, incorrect dimensions, or incompatible seals that fail prematurely. A cylinder failure under load can lead to sudden dropping of equipment, causing injury, damage, and costly downtime. The genuine A5002080106 provides assured quality, maintains vehicle warranty conditions where applicable, and gives operators confidence in the safety and reliability of their equipment.
When troubleshooting systems involving the A5002080106, a logical approach is essential. If the cylinder fails to move, check system pressure and fluid level first. If pressure is low, the issue may be with the pump or relief valve. If the cylinder moves slowly, check for flow restrictions or viscosity issues. If the cylinder drifts down, isolate the cylinder by disconnecting its hoses and capping the ports; if drift stops, the issue is likely internal seals in the A5002080106. If drift continues, the problem is in the control valve.
External leaks require identification of the source. Leaks at the rod seal may require a seal replacement kit. Leaks at port fittings may need re-torquing or new sealing washers. A scored rod often necessitates cylinder replacement, as it will rapidly destroy new seals. Always consult the BEIBEN service manual for specific diagnostic procedures and safety warnings before working on hydraulic systems.
The A5002080106 Haudraulic Cylinder holds a position of trust within the BEIBEN genuine parts portfolio. Its value is derived from guaranteed compatibility, certified performance, and the rigorous quality control applied during manufacturing. Fleet maintenance managers and equipment operators who prioritize uptime and safety consistently choose genuine hydraulic components to avoid the risks and uncertainties of aftermarket parts.
Quality assurance for the A5002080106 involves material testing, dimensional inspection, pressure testing (often to 1.5 times working pressure), and performance validation. This comprehensive process ensures that every cylinder leaving the factory meets the high standards required for heavy-duty commercial vehicle applications. This differentiation provides customers with the confidence that the A5002080106 will deliver reliable service throughout its intended lifecycle.
The A5002080106 Haudraulic Cylinder is a fundamental component for the hydraulic systems of BEIBEN trucks, enabling critical functions like lifting, tilting, and positioning. Its robust construction, precise engineering, and reliable sealing are essential for safe and productive operation. Choosing the genuine A5002080106 part guarantees the correct fit, performance, and durability required for demanding commercial use.
Adherence to proper installation, regular system maintenance, and prompt attention to leaks or performance issues will maximize the service life of this component. By investing in authentic BEIBEN parts like the A5002080106, truck owners and fleet managers ensure operational reliability, protect their personnel and assets, and maintain the high standards expected of professional transportation equipment. Always verify OEM numbers and source hydraulic components from authorized, reputable suppliers.
© 2023 Truck Parts Guide. This content is for informational purposes. Always consult the official BEIBEN service manual and qualified professionals for maintenance, repair, and safety-critical hydraulic procedures.
If you have any questions about our products, services, or anything related to what we offer, please don’t hesitate to leave us a message—our dedicated team is always ready to provide prompt and helpful responses to address your concerns. What’s more, when you become our valued customer, we’re delighted to offer you complimentary catalog services, giving you access to detailed, up-to-date information on our full range of products, specifications, and offerings to help you make informed decisions.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
