WG9725161390 Driven Plate Ass
Premium Durable Sinotruk Howo Truck Parts | WG9725161390 Heavy-Duty Driven Plate Ass
2026-10-22
WG9725590259 Right Support Bracket
Premium Durable Sinotruk Howo Truck Parts | WG9725590259 Heavy-Duty Right Support Bracket
2026-10-18

Premium Durable Sinotruk Howo Truck Parts | WG9003073001 Heavy-Duty Cage Oil Seal PS 30 45 8

PART NO.:
WG9003073001
Part Name:
Cage Oil Seal PS 30 45 8
Russian Name:
Масляный уплотнитель каркаса PS 30 45 8

The WG9003073001 Cage Oil Seal PS 30 45 8 is a premium, heavy-duty chassis sealing component engineered specifically for SINOTRUK Howo trucks, providing a precise rotary shaft seal at the transmission front housing to retain lubricant and block dust, mud and water ingress. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM-grade skeleton oil seal as a direct replacement for the original factory unit. The WG9003073001 seal ensures correct 30 × 45 × 8 mm fitment, reliable lip contact and dependable operation on Howo A7, T7H, HOWO 371 and HOWO 380 models with HW19710 and HW19712L gearboxes.

Manufactured with a nitrile rubber (NBR) sealing lip, a cold-rolled steel cage and a hardened garter spring, this PS-type oil seal is built to exact OEM dimensions. Its robust construction maintains correct radial lip pressure against the rotating shaft, resists transmission oil, heat, vibration and temperature extremes from -25°C to +120°C, and performs reliably in constant commercial truck service.

OEM WG9003073001 • Cage Oil Seal PS 30 45 8 • NBR lip, steel cage, garter spring • Direct OEM fit

WG9003073001 Cage Oil Seal PS 30 45 8
Cage Oil Seal PS 30 45 8 (EN)
WG9003073001 Cage Oil Seal PS 30 45 8
Каркасный сальник PS 30 45 8 (RU)
WG9003073001 Cage Oil Seal PS 30 45 8
Retén de aceite con jaula PS 30 45 8 (ES)

Product Overview – WG9003073001 Cage Oil Seal PS 30 45 8

This cage oil seal is a critical wear component installed in the transmission front housing of SINOTRUK Howo trucks, specifically on HW19710, HW19712L and related gearbox families. It seals the rotating input shaft where it passes through the front case, keeping transmission oil inside the gearbox and contaminants outside.

The seal is manufactured to exact OEM dimensions. Inner diameter 30 mm, outer diameter 45 mm and thickness 8 mm match the factory specification, while the PS profile with outer rubber and inner garter spring delivers consistent radial lip load on the shaft. The steel cage provides a rigid press-fit into the aluminium front housing.

Common signs that a cage oil seal needs replacement include oil weeping or dripping at the transmission front housing, oil mist build-up around the clutch area, a slipping or contaminated clutch, gear oil loss requiring frequent top-ups, and visible cracks or hardening of the seal lip.

Fitting a new WG9003073001 Cage Oil Seal PS 30 45 8 restores a reliable rotary shaft seal, stops gear oil leaks and protects the clutch, input shaft bearing and gearbox internals from contamination and lubricant loss.

Technical Specifications – WG9003073001 Cage Oil Seal PS 30 45 8

Parameter Specification
OEM Number WG9003073001
Product Name Cage Oil Seal PS 30 45 8
Brand SINOTRUK Howo
Component Type Chassis / Transmission Rotary Shaft Seal
Weight Approx. 0.04 kg
Material NBR sealing lip, cold-rolled steel cage, hardened garter spring
Operating Voltage Not applicable (mechanical seal)
Dimensions (ID × OD × W) 30 mm × 45 mm × 8 mm
Seal Type PS profile, outer rubber, inner garter spring
Operating Temperature -25°C to +120°C
Protection Rating Gear oil, water, dust and abrasion resistant
Compatible Models HOWO A7, T7H, HOWO 371, HOWO 380 with HW19710 / HW19712L gearbox
Certification ISO 9001, OEM validated
All values verified for this cage oil seal

Key Features of WG9003073001 Cage Oil Seal PS 30 45 8

OEM specification – exact 30 × 45 × 8 mm replacement for HW19710/19712L front housing.
NBR sealing lip – excellent resistance to gear oil and heat.
Cold-rolled steel cage – rigid press-fit into the aluminium housing.
Garter spring – maintains constant radial lip load on the shaft.
PS profile with outer rubber – improves static sealing against the bore.
Temperature range -25°C to +120°C – stable sealing in hot gearbox conditions.
Simple installation – presses into the front housing bore without special tools.
Cost-effective – prevents costly clutch and gearbox contamination.

Compatibility & Applications – WG9003073001 Cage Oil Seal

This cage oil seal is designed for SINOTRUK Howo trucks, with primary fitment in the transmission front housing of the HW19710, HW19712L and related 10-speed and 12-speed gearboxes found in A7, T7H, HOWO 371 and HOWO 380 models. It is a direct OE replacement for the original PS 30 45 8 seal.

The seal is essential in applications where gearbox lubricant retention and clutch protection are critical, such as long-haul transport, construction, mining and municipal service. In these duties, it must resist continuous shaft rotation, oil pressure, heat and external dust and water.

When replacing the seal, it is recommended to inspect the input shaft journal for scoring or wear, the front housing bore for damage, the input bearing for play and the clutch for oil contamination. This part is designed to work with the factory transmission assembly for correct fit and reliable sealing.

For fleets with multiple HOWO trucks, standardising on the WG9003073001 Cage Oil Seal PS 30 45 8 simplifies transmission maintenance and ensures the correct sealing part is available for scheduled clutch or gearbox service.

Installation & Maintenance – WG9003073001 Cage Oil Seal

Replacing the WG9003073001 Cage Oil Seal is a precision procedure that requires a seal puller, a suitable driver and a clean work area. This work should be performed by a qualified technician, typically during clutch or gearbox removal.

Remove the old seal carefully with a seal puller, taking care not to score the aluminium housing bore or damage the input shaft journal. Clean the bore thoroughly and inspect for burrs, corrosion or wear.

Apply a thin film of clean gear oil to the new seal lip and outer circumference, then press the seal squarely into the bore using a driver of the correct diameter until it is fully seated and flush.

Refit the gearbox and clutch, refill with the specified transmission oil and check for leaks after the first run. During routine service, inspect the front housing area for oil weeping and replace the seal whenever the gearbox is removed for clutch work.

Pro Tip: Never install a seal dry or with grease that is incompatible with gear oil. Lubricate the lip with clean transmission fluid, press the seal in squarely and always check the shaft journal for a wear groove before fitting a new seal.

Quality Assurance – WG9003073001 Cage Oil Seal

This cage oil seal is manufactured in an ISO 9001-certified facility using NBR compound, cold-rolled steel and a hardened garter spring. Incoming materials are checked for rubber hardness, steel thickness and spring tension before production begins.

Each seal is molded and assembled on precision equipment, then inspected for inner diameter, outer diameter, thickness, lip profile and spring retention. Every batch is dimensionally checked, and samples receive a lip contact and oil immersion test before packing.

Batch samples undergo thermal cycling, oil resistance and compression set testing to confirm long-term sealing reliability in heavy-duty truck use. These checks help ensure the seal performs in the tough conditions Howo gearboxes face every day.

This cage oil seal is covered by a 12-month warranty against material and workmanship defects. Strict quality control means every unit matches the fit, function and durability of the original factory part.

ISO 9001 OEM Validated Oil Tested 12-Month Warranty

Why Choose WG9003073001 Cage Oil Seal PS 30 45 8 for Your SINOTRUK Howo?

The WG9003073001 Cage Oil Seal PS 30 45 8 is a vital component for maintaining gearbox lubricant integrity, clutch performance and transmission reliability on your Howo truck. A leaking front seal can contaminate the clutch, cause slipping, and lead to costly gearbox damage from oil loss.

Manufactured from quality NBR with a rigid steel cage and a reliable garter spring, this seal offers dependable rotary sealing and long service life. Its exact OEM dimensions keep installation simple and work with the factory transmission front housing.

Fleet operators benefit from reduced gearbox repair downtime, lower maintenance costs and improved vehicle availability. Owner-operators gain confidence from a seal that meets strict OEM standards and is backed by a 12-month warranty.

Order the WG9003073001 Cage Oil Seal PS 30 45 8 today and keep your SINOTRUK Howo transmission sealed, clean and reliable for years to come.

OEM WG9003073001 SINOTRUK Howo Approved Premium Chassis Component
WG9003073001 Cage Oil Seal PS 30 45 8 – Premium SINOTRUK Howo Chassis Transmission Sealing Component

Related Products

Customer Visit

2025-09-28

Kenya Truck Parts Collaboration: DERUNA Empowers Local Distributors to Deepen Presence in Chinese Heavy-Duty Truck Market

DERUNA strengthens its partnership with Kenyan distributors of Howo, Shacman, and FAW trucks. This visit confirmed the high quality of our Kenya Trucks Parts and paved the way for expanding the supply of reliable components to the Kenyan market.
2025-09-25

Strategic Expansion: Howo Parts Niger Partnership Strengthened by Client Visit to DERUNA

DERUNA hosted a client from Niger specializing in Howo Parts Niger. The visit, fueled by the client's positive experience, led to a new合作 plan with customized parts recommendations for the Niger market.
2025-09-25

Boost Your Fleet: Howo Parts Mozambique Success with DERUNA

A leading Mozambican parts intermediary visited DERUNA, expressing high satisfaction with HOWO and Shacman parts. We reviewed local sales data and planned future cooperation for optimal Howo Parts Mozambique supply.
2025-09-24

Strengthening the Partnership: DERUNA Hosts Krasnoyarsk’s Premier HOWO Parts Distributor

Strengthening the Partnership: DERUNA Welcomes the Distributor of Howo Parts Krasnoyarsk for a Strategic Review.
2025-09-23

Building the Future: DERUNA Welcomes Bangladeshi Road Construction Leader for Equipment Review and Strategic Planning

Building the Future: DERUNA Hosts XCMG Shantui Equipment Bangladesh Review with Strategic Partner.
2025-09-23

Strengthening Mining Operations: DERUNA Welcomes Mauritanian Mining Company for Strategic Partnership Review

Strengthening Mining Operations: DERUNA Welcomes Mauritanian Mining Company to Review HOWO Dump Truck and XCMG Excavator Partnership.
Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
Connecting...
Please leave your inquiry and your phone. We will give you feedback within 12 hours.
Our operators are busy. Please try again later
:
:
:
:
Have you got question? Write to us!
:
:
This chat session has ended