- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The WD615.50 Engine is a premium, heavy-duty chassis powertrain component engineered for SINOTRUK Howo and Hohan N7 series trucks. It is the inline-six diesel engine that delivers the torque and durability required for loaded haulage, construction site work and long-haul transport. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM-grade engine as a direct replacement for the original factory unit. The WD615.50 engine restores reliable power and fuel efficiency on Howo H76/H77 chassis and Hohan N7G models.
Manufactured with a reinforced cylinder block, a precision-machined cylinder head and high-strength internal components, this engine is built to exact OEM specifications. Its mounting points, bell housing pattern and accessory drive layout match the factory chassis and gearbox, so replacement keeps the driveline aligned and the original wiring and plumbing compatible.
OEM WD615.50 • Inline-six diesel engine • Reinforced cylinder block • Direct OEM fit
This engine is the inline-six diesel power unit fitted to SINOTRUK Howo H76 and H77 chassis and to the Hohan N7G platform. It drives through the factory gearbox and rear axle to deliver the torque needed for loaded haulage, tipper and mixer work, site access and long-distance transport.
The WD615.50 engine uses a reinforced cylinder block, a precision-machined head and high-strength pistons, rings and bearings. The mounting points and bell housing pattern follow the original factory design, so the engine aligns with the chassis, gearbox and radiator without adapter plates or modification.
Common signs that an engine needs replacement or major repair include excessive oil consumption, blue or white smoke, low oil pressure, knocking or rumbling noises, coolant loss, overheating and a serious loss of power under load.
Fitting the WD615.50 engine restores factory power, fuel economy and reliability. It is a major repair that protects the truck from repeated breakdowns and keeps the driveline and cooling system matched to the original design.
This engine is designed for SINOTRUK Howo and Hohan trucks, with primary compatibility across the H76/H77 chassis used on HOWO models and the Hohan N7G platform. The WD615.50 unit is a direct OE replacement that mounts to the factory chassis brackets and matches the original gearbox bell housing.
The engine is critical in applications where the truck operates under heavy load and continuous duty, such as tipper and mixer work, construction site haulage, quarry support and long-haul transport. In these duties it must deliver stable torque, manage heat and resist dust, vibration and fuel quality variation.
Before fitting a replacement engine, inspect the chassis mounts, radiator, intercooler, exhaust and wiring harness for damage or corrosion. A worn mount or blocked radiator can shorten the life of a new engine, so repair related faults first.
For fleets running multiple HOWO or Hohan trucks, planning around the WD615.50 engine keeps major overhauls predictable, reduces vehicle downtime and protects the resale value of the truck in daily commercial service.
Installing a complete engine is a major workshop operation for a qualified diesel technician. Disconnect the battery, drain the coolant and fuel, and remove the bonnet, radiator and front-end components to create safe access to the engine bay.
Disconnect the wiring harness, fuel lines, coolant hoses, exhaust and gearbox, then support the engine with a hoist and remove the mounting bolts. Clean the chassis mounts and bell housing face, and check the flywheel and clutch for wear before refitting.
Lower the new WD615.50 engine into position, align the bell housing and mounts, and install the fasteners finger-tight. Reconnect the driveline, cooling, fuel and electrical systems, then tighten all mounts and connections to the OEM torque figures.
Refill with the correct coolant and engine oil, prime the fuel system and run the engine at idle. Check for leaks, confirm oil pressure and coolant temperature, then carry out a road test. Follow the recommended service intervals for filters, oil and valve clearance.
This engine is manufactured and assembled in an ISO 9001-certified facility using a reinforced cylinder block, a precision-machined head and high-strength internal components. Incoming parts are checked for dimensional accuracy, hardness and surface finish before assembly.
Each WD615.50 engine is assembled with controlled torque values and tested for oil pressure, compression, fuel delivery and coolant sealing. Every batch is checked against the OEM specification, and production samples run through a hot test before packing.
Batch samples also undergo endurance and vibration testing to confirm long-term reliability in heavy-duty truck use. These checks help ensure the engine withstands continuous load and the harsh conditions Howo and Hohan trucks face every day.
The WD615.50 engine is covered by a 12-month warranty against material and workmanship defects. Strict quality control means every unit matches the fit, function and durability of the original factory part.
A worn or failed engine is the most expensive breakdown a truck can suffer. It stops the vehicle completely, risks damage to the gearbox and cooling system and can leave a fleet short of capacity during peak work. Rebuilding a badly worn core is often uneconomical.
The WD615.50 replacement engine solves the problem at the source. The reinforced block and durable internals restore factory power and fuel economy, while the original mounting and bell housing pattern keep the driveline matched and the installation straightforward.
Fleet operators benefit from predictable overhaul costs, reduced breakdown risk and reliable vehicle availability. Owner-operators gain confidence from a part that meets strict OEM standards and is backed by a 12-month warranty.
Order the WD615.50 Engine today and restore dependable power and durability on your SINOTRUK Howo or Hohan truck.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
