YZ952558100362/2 Remote Key
Premium Durable Sinotruk Howo Truck Parts | YZ952558100362/2 Heavy-Duty Remote Key
2026-10-25
WG9003073001 Cage Oil Seal PS 30 45 8
Premium Durable Sinotruk Howo Truck Parts | WG9003073001 Heavy-Duty Cage Oil Seal PS 30 45 8
2026-10-21

Premium Durable Sinotruk Howo Truck Parts | WG9725161390 Heavy-Duty Driven Plate Ass

PART NO.:
WG9725161390
Part Name:
Driven Plate Ass
Russian Name:
Сборка ведомой пластины

The WG9725161390 Driven Plate Ass is a premium, heavy-duty chassis clutch component engineered specifically for SINOTRUK Howo trucks, providing the central friction interface that transmits engine torque to the transmission input shaft while enabling smooth gear engagement and disengagement. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM-grade 430 mm pull-type clutch disc as a direct replacement for the original factory unit. The WG9725161390 assembly ensures correct spline fit, stable friction performance and dependable operation on Howo A7, T7H, T5G, HOWO 336 and HOWO 371 models with 430 HP WD615 or WP12 engines.

Manufactured with a ceramic-metallic friction compound, a riveted facing, a multi-coil torsion damper and a precision-broached splined hub, this driven plate is built to exact OEM dimensions. Its robust construction maintains correct clamp load, absorbs driveline shock, resists heat, vibration, oil contamination and temperature extremes, and performs reliably in constant commercial haulage, construction and long-distance transport.

OEM WG9725161390 • 430 mm pull-type driven plate • 10 splines / 52.3 mm bore • Ceramic-metallic facing • Direct OEM fit

WG9725161390 Driven Plate Ass
Driven Plate Ass (EN)
WG9725161390 Driven Plate Ass
Ведомый диск сцепления в сборе (RU)
WG9725161390 Driven Plate Ass
Conjunto de disco conducido (ES)

Product Overview – WG9725161390 Driven Plate Ass

The WG9725161390 Driven Plate Ass is the friction disc at the heart of the 430 mm pull-type clutch system used in SINOTRUK Howo heavy trucks. It sits between the flywheel and the pressure plate, transmitting engine torque through its splined hub to the gearbox input shaft while its torsion damper absorbs the shock of each gear change.

The 430 mm diameter and 10-spline, 52.3 mm bore hub match the factory HW19710, HW19712 and 16-speed transmission input shafts, while the pull-type diaphragm spring facing ensures correct release geometry. The ceramic-metallic friction compound is riveted to a high-strength steel carrier for stable friction and long wear life under heavy loads.

Common signs that a driven plate needs replacement include clutch slip under acceleration, shudder or judder during engagement, difficulty selecting gears, a burning smell after hill starts, and visible cracks, glazing or oil contamination on the friction facing.

Fitting a new WG9725161390 Driven Plate Ass restores correct torque transfer, smooth clutch engagement and reliable gear shifting. It is a durable repair that protects the flywheel, pressure plate, release bearing and gearbox from shock loading and heat damage.

Technical Specifications – WG9725161390 Driven Plate Ass

Parameter Specification
OEM Number WG9725161390
Product Name Driven Plate Ass (430 mm Pull-Type Clutch Disc)
Brand SINOTRUK Howo
Component Type Chassis / Clutch Driven Plate
Weight Approx. 8.88 kg
Friction Material Ceramic-metallic compound, riveted facing
Operating Voltage Not applicable (mechanical clutch component)
Disc Diameter 430 mm
Spline Count / Bore 10 splines / 52.3 mm
Clutch Type Pull-type, 430 mm diaphragm spring cover
Damper System Multi-coil torsion spring design
Compatible Models HOWO A7, T7H, T5G, HOWO 336, HOWO 371 with 430 HP WD615 / WP12 engine
Certification ISO 9001, OEM validated
All values verified for WG9725161390 Driven Plate Ass

Key Features of WG9725161390 Driven Plate Ass

OEM specification – exact 430 mm replacement for Howo clutch discs.
Ceramic-metallic facing – stable friction and high heat resistance.
Multi-coil torsion damper – absorbs driveline shock and reduces judder.
Precision-splined hub – exact 10-spline / 52.3 mm fit on the input shaft.
Pull-type geometry – correct release bearing contact for 430 mm covers.
Heat and oil resistant – stable friction in commercial duty.
Simple installation – fits the original flywheel and pressure plate.
Cost-effective – restores clutch performance without gearbox work.

Compatibility & Applications – WG9725161390 Driven Plate Ass

This driven plate is designed for SINOTRUK Howo trucks with 430 HP WD615 or WP12 engines, with primary compatibility across the A7, T7H, T5G, HOWO 336 and HOWO 371 series. It is a direct OE replacement for the original 430 mm pull-type clutch disc and works with the factory flywheel and pressure plate.

The disc is essential in applications where reliable torque transfer and smooth clutch control are critical, such as long-haul freight, dump truck operation, concrete mixing and construction haulage. In these duties, it must resist heat, vibration, dust, oil contamination and frequent clutch engagement.

When replacing the driven plate, it is recommended to inspect the flywheel friction surface, pressure plate, release bearing and input shaft splines for wear or damage. This part is designed to work with the factory clutch assembly for correct fit and reliable operation.

For fleets with multiple HOWO trucks, standardising on the WG9725161390 Driven Plate Ass simplifies clutch maintenance and ensures the correct part is available for scheduled service or emergency repairs.

Installation & Maintenance – WG9725161390 Driven Plate Ass

Replacing the WG9725161390 Driven Plate Ass is a job for a qualified technician using a transmission jack and clutch alignment tool. Remove the gearbox, unbolt the pressure plate in a cross pattern and withdraw the old disc from the flywheel.

Clean the flywheel friction surface and inspect for scoring, cracks or heat discoloration. Clean the input shaft splines and apply a thin film of high-molybdenum grease. Check the release bearing and pilot bearing for smooth operation.

Fit the new disc with the damper hub facing the gearbox and the pull-type facing toward the pressure plate. Use an alignment tool to centre the disc, then install the pressure plate and tighten the bolts in a star pattern to the OEM torque.

Refit the gearbox, refill or bleed the clutch system as required, and road test through all gears. During routine service, check for clutch slip, judder or noise and replace the disc whenever the friction facing approaches the wear limit.

Pro Tip: Never hammer the disc hub to rotate it after installation, as this damages the torsion damper. Always use a clutch alignment tool and verify that the pull-type facing is oriented correctly before tightening the pressure plate.

Quality Assurance – WG9725161390 Driven Plate Ass

This driven plate is manufactured in an ISO 9001-certified facility using ceramic-metallic friction compound, a riveted steel carrier and a precision-broached splined hub. Incoming friction material is checked for coefficient stability, heat resistance and bond strength.

Each disc is assembled and balanced on precision lines, then inspected for facing thickness, rivet height, spline fit, damper spring tension and overall runout. Every batch is dimensionally checked, and samples receive a torque and burst test before packing.

Batch samples undergo thermal cycling, friction fade and wear testing to confirm long-term reliability in heavy-duty truck use. These checks help ensure the driven plate performs in the tough conditions Howo clutches face every day.

This driven plate is covered by a 12-month warranty against material and workmanship defects. Strict quality control means every unit matches the fit, function and durability of the original factory part.

ISO 9001 OEM Validated Torque Tested 12-Month Warranty

Why Choose WG9725161390 Driven Plate Ass for Your SINOTRUK Howo?

The WG9725161390 Driven Plate Ass is a vital component for maintaining reliable torque transfer, smooth gear changes and driveline protection on your Howo truck. A worn or contaminated disc causes clutch slip, judder, difficult shifting and potential damage to the flywheel and pressure plate.

Manufactured from quality ceramic-metallic friction material with a multi-coil damper and a precision-splined hub, this 430 mm pull-type disc offers dependable performance and long service life. Its exact OEM dimensions keep installation simple and work with the factory clutch assembly.

Fleet operators benefit from reduced clutch repair downtime, lower maintenance costs and improved vehicle availability. Owner-operators gain confidence from a driven plate that meets strict OEM standards and is backed by a 12-month warranty.

Order the WG9725161390 Driven Plate Ass today and keep your SINOTRUK Howo driveline engaging smoothly, strongly and reliably for years to come.

OEM WG9725161390 SINOTRUK Howo Approved Premium Chassis Component
WG9725161390 Driven Plate Ass – Premium SINOTRUK Howo Chassis Clutch Component

Related Products

Customer Visit

2025-09-28

Kenya Truck Parts Collaboration: DERUNA Empowers Local Distributors to Deepen Presence in Chinese Heavy-Duty Truck Market

DERUNA strengthens its partnership with Kenyan distributors of Howo, Shacman, and FAW trucks. This visit confirmed the high quality of our Kenya Trucks Parts and paved the way for expanding the supply of reliable components to the Kenyan market.
2025-09-25

Strategic Expansion: Howo Parts Niger Partnership Strengthened by Client Visit to DERUNA

DERUNA hosted a client from Niger specializing in Howo Parts Niger. The visit, fueled by the client's positive experience, led to a new合作 plan with customized parts recommendations for the Niger market.
2025-09-25

Boost Your Fleet: Howo Parts Mozambique Success with DERUNA

A leading Mozambican parts intermediary visited DERUNA, expressing high satisfaction with HOWO and Shacman parts. We reviewed local sales data and planned future cooperation for optimal Howo Parts Mozambique supply.
2025-09-24

Strengthening the Partnership: DERUNA Hosts Krasnoyarsk’s Premier HOWO Parts Distributor

Strengthening the Partnership: DERUNA Welcomes the Distributor of Howo Parts Krasnoyarsk for a Strategic Review.
2025-09-23

Building the Future: DERUNA Welcomes Bangladeshi Road Construction Leader for Equipment Review and Strategic Planning

Building the Future: DERUNA Hosts XCMG Shantui Equipment Bangladesh Review with Strategic Partner.
2025-09-23

Strengthening Mining Operations: DERUNA Welcomes Mauritanian Mining Company for Strategic Partnership Review

Strengthening Mining Operations: DERUNA Welcomes Mauritanian Mining Company to Review HOWO Dump Truck and XCMG Excavator Partnership.
Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
Connecting...
Please leave your inquiry and your phone. We will give you feedback within 12 hours.
Our operators are busy. Please try again later
:
:
:
:
Have you got question? Write to us!
:
:
This chat session has ended