- ADDRESS：Wanda Plaza, Jinan, Shandong, China
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
In the world of heavy-duty trucking, true reliability is built from the ground up, starting with the smallest and most fundamental components. The integrity of every major assembly—from the engine and suspension to the frame and body panels—depends on the quality of the fasteners that hold it together. For BEIBEN truck owners and technicians, this means trusting only genuine Beiben truck parts for repairs and maintenance.
< p> The BEIBEN Bolt, specified by the precise OEM part number 6599900001, is a critical fastener engineered to meet stringent factory standards. This specific bolt, part number 6599900001, is designed to provide the exact clamping force, tensile strength, and corrosion resistance required for its designated application, ensuring a secure and lasting connection that maintains vehicle safety and structural integrity over countless miles and under extreme loads.
Bolt
Болт
Perno
A bolt is far more than a simple piece of threaded metal. In a heavy-duty truck, it is a precision-engineered clamping device responsible for maintaining critical joint integrity. The BEIBEN 6599900001 Bolt is designed for a specific location and function within the vehicle. Each bolt’s dimensions (diameter, length, thread pitch), strength grade, and material composition are carefully calculated to withstand the unique forces it will encounter. These forces include static tension from pre-load, dynamic shear and vibration from road impacts, and cyclical stress from the flexing of the chassis. Using an incorrect or substandard bolt, part number 6599900001, in a high-stress application can lead to joint failure, which may cause component detachment, catastrophic damage, or a serious safety hazard.
This genuine bolt ensures that the joint it secures performs as the vehicle’s engineers intended. It maintains the correct pre-load to prevent loosening under vibration, provides the necessary strength to handle operational loads without stretching or shearing, and often features specific coatings or plating to resist corrosion from moisture, road salt, and chemicals. Never underestimate the importance of this small part; it is a key guardian of your truck’s overall reliability.
BEIBEN’s commitment to quality permeates every level of vehicle manufacturing, including the specification of fasteners. The 6599900001 is not a generic hardware store bolt. It is an OEM (Original Equipment Manufacturer) part, meaning it is produced to the exact material, dimensional, and performance specifications set by BEIBEN’s engineering team. These specifications are derived from rigorous testing and are integral to the vehicle’s design and safety certifications.
Aftermarket bolts may look similar but often differ in subtle yet critical ways: a slightly different thread pitch, a lower-grade steel, an inadequate or missing corrosion coating, or an imprecise head marking indicating incorrect strength. These differences can compromise joint integrity. The genuine BEIBEN 6599900001 Bolt guarantees you are restoring the vehicle to its original, safe, and reliable condition.
| Parameter | Specification | Description |
|---|---|---|
| OEM Part Number | 6599900001 | Unique BEIBEN identifier for this specific bolt. |
| Thread Diameter (e.g., M12) | Precise Measurement | The major diameter of the bolt’s threads. |
| Thread Pitch | Specific (e.g., 1.75mm) | The distance between adjacent threads; critical for proper nut engagement. |
| Length (Under Head) | Precise Measurement | The shank length, determining grip range. |
| Strength Grade / Class | e.g., 10.9, 8.8 | Indicates tensile strength and yield point; marked on the bolt head. |
| Head Style | Hexagon, Flange, etc. | Determines the tool required for installation (socket, wrench). |
| Material | Medium Carbon or Alloy Steel | Heat-treated for the specified strength grade. |
| Finish / Coating | Zinc, Dichromate, or other | Provides corrosion resistance and sometimes lubricity. |
Using the correct strength grade and dimensions ensures the bolt will not fail under design loads. This is crucial for safety-critical applications like suspension, steering, or brake components, where fastener failure could have severe consequences.
The genuine 6599900001 bolt will have the exact thread pitch and length for its intended hole. It will thread in smoothly by hand, cross-thread, or bind, preventing damage to expensive components and saving valuable repair time.
Factory-specified coatings are tested for the truck’s operating environment. This ensures the bolt, part number 6599900001, resists seizing and rusting, making future disassembly for service easier and preventing thread galling and breakage.
The performance of a high-quality bolt like the 6599900001 is only realized if it is installed correctly. The most critical factor is achieving the proper clamping force, which is controlled by applying the correct torque. Every bolted joint on a BEIBEN truck has a specified torque value, found in the official service manual. This value is calculated based on the bolt’s grade, diameter, lubrication, and the joint’s function.
Installation Best Practices: Always clean the bolt threads and the threaded hole before installation. If the original bolt was a torque-to-yield (TTY) design (often used on cylinder heads), it must be replaced with a new genuine TTY bolt and tightened according to the specific angular torque procedure. Never reuse a stretched or damaged TTY bolt. For standard bolts, use a calibrated torque wrench and follow the specified sequence for multi-bolt joints (like wheel hubs or flanges) to ensure even clamping.
Under-torquing can allow the joint to loosen from vibration, while over-torquing can stretch the bolt beyond its yield point, permanently weakening it or causing it to snap. Taking the time to torque the 6599900001 bolt correctly is as important as selecting the right part.
Bolts should be inspected during routine maintenance or whenever a component is serviced. A bolt carrying the part number 6599900001 that requires replacement will often show visible signs of wear or damage. The most obvious sign is corrosion or rust that has pitted the shank or eaten into the threads, compromising its strength. Any bolt that is bent or shows signs of stretching should be replaced immediately.
Check the threads for damage: stripping, galling (where metal has fused), or cross-threading. If a bolt is difficult to remove or requires excessive force to turn during disassembly, it may be compromised. Always replace any bolt that was used in a high-temperature environment (like near the exhaust) or that has been loosened and retightened multiple times, as these conditions can anneal (soften) the steel.
The BEIBEN 6599900001 Bolt exemplifies the principle that great reliability is built on attention to detail. It may be one of the smallest and least expensive parts you order, but its role in maintaining the safety, performance, and longevity of your truck is immense. Using genuine fasteners for repairs protects your investment and ensures the vehicle operates as its engineers designed.
Choosing the OEM part number 6599900001 is a simple yet powerful decision for quality and peace of mind. It guarantees the correct fit, strength, and durability for a secure and lasting repair. Don’t let a generic fastener be the weak link in your truck’s integrity. For repairs you can trust, insist on the BEIBEN 6599900001 Bolt.
If you have any questions about our products, services, or anything related to what we offer, please don’t hesitate to leave us a message—our dedicated team is always ready to provide prompt and helpful responses to address your concerns. What’s more, when you become our valued customer, we’re delighted to offer you complimentary catalog services, giving you access to detailed, up-to-date information on our full range of products, specifications, and offerings to help you make informed decisions.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
