WG9725160300 Clutch Plate
Premium Durable Sinotruk Howo Truck Parts | WG9725160300 Heavy-Duty Chassis Clutch Plate
2026-10-18
WG9719570001 Accelerator Pedal Cover
Premium Durable Sinotruk Howo Truck Parts | WG9719570001 Heavy-Duty Accelerator Pedal Cover
2026-10-18

Premium Durable Sinotruk Howo Truck Parts | WG9719720020 Heavy-Duty Chassis Work Light

PART NO.:
WG9719720020
Part Name:
Work Light
Russian Name:
Рабочая фара

The WG9719720020 Work Light is a premium, heavy-duty chassis lighting component engineered specifically for SINOTRUK Howo trucks, delivering bright, reliable illumination for night driving, loading, maintenance and off-road work. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM-grade work light as a direct replacement for the original factory unit. The WG9719720020 light ensures correct fitment, stable performance and dependable operation on Howo A7, T7H, HOWO 371 and HOWO 380 models.

Manufactured with a high-strength die-cast housing, a tough polycarbonate lens, sealed waterproof connectors and a corrosion-resistant coating, this work light is built to exact OEM dimensions. Its robust construction maintains correct beam angle, resists vibration, dust, water, road salt and temperature extremes, and performs reliably in constant commercial truck service.

OEM WG9719720020 • Chassis work light • Waterproof seal • Vibration resistant • Direct OEM fit

WG9719720020 Work Light
Work Light (EN)
WG9719720020 Work Light
Рабочий фонарь (RU)
WG9719720020 Work Light
Luz de trabajo (ES)

Product Overview – WG9719720020 Work Light

This work light is a practical chassis lighting component mounted on SINOTRUK Howo trucks to illuminate the area around the vehicle at night or in low-visibility conditions. It is commonly used for loading, inspections, repairs and off-road work.

The light is manufactured to exact OEM dimensions. Housing shape, mounting bracket hole spacing, lens profile, connector type and beam angle all match the factory specification, so it installs correctly and provides the intended light coverage.

Common signs that a work light needs replacement include a dim or flickering beam, moisture or condensation inside the lens, cracks in the housing, corroded connectors, a broken mounting bracket and a lens that has become cloudy or yellowed over time.

Fitting a new WG9719720020 Work Light restores bright, reliable illumination, improves night-time safety and supports efficient loading and maintenance work. It is a durable, cost-effective repair for demanding truck service.

Technical Specifications – WG9719720020 Work Light

Parameter Specification
OEM Number WG9719720020
Product Name Work Light
Brand SINOTRUK Howo
Component Type Chassis / Work Light
Weight Approx. 0.45 kg
Material Die-cast housing, polycarbonate lens, corrosion-resistant coating
Operating Voltage 24V DC (truck electrical system)
Light Output OEM-specified beam pattern for wide area coverage
Connection Type Sealed waterproof connector
Operating Temperature -40°C to +85°C
Protection Rating Waterproof, dustproof and corrosion resistant
Compatible Models HOWO A7, T7H, HOWO 371, HOWO 380 and related heavy-duty chassis
Certification ISO 9001, OEM validated
All values verified for this work light

Key Features of WG9719720020 Work Light

OEM specification – exact replacement for Howo work lights.
Bright illumination – wide beam for night work and loading.
Waterproof seal – keeps moisture and dust out of the housing.
Impact-resistant lens – polycarbonate resists stone and debris damage.
Corrosion-resistant housing – durable against road salt and water.
Vibration stable – secure mounting under road shock and load.
Simple installation – fits the original mounting bracket and harness.
Cost-effective – restores lighting without replacing the full harness.

Compatibility & Applications – WG9719720020 Work Light

This work light is designed for SINOTRUK Howo trucks, with primary compatibility across the A7, T7H, HOWO 371 and HOWO 380 series. It is a direct OE replacement, so it mounts to the original bracket and connects to the factory wiring harness without modification.

The light is essential in applications where reliable night-time illumination is critical, such as long-haul transport, construction, mining and municipal service. In these duties, it must resist vibration, road shock, water, dust and temperature extremes.

When replacing the work light, it is recommended to inspect the mounting bracket, wiring, relay and fuse for wear or damage. This part is designed to work with the factory lighting system for correct fit and reliable operation.

For fleets with multiple HOWO trucks, standardising on the WG9719720020 Work Light simplifies maintenance and ensures the correct part is available for scheduled service or emergency repairs.

Installation & Maintenance – WG9719720020 Work Light

Replacing the WG9719720020 Work Light is a straightforward procedure that requires basic hand tools and care with the electrical connection. This work should be performed by a qualified technician.

Switch off the ignition and disconnect the battery before starting. Remove the mounting bolts and disconnect the old light from the wiring harness. Clean the bracket and inspect the wiring for cracks or corrosion.

Position the new work light on the bracket, align the mounting holes, and install the bolts. Tighten them to the OEM torque specification, then connect the sealed plug to the harness until it clicks securely into place.

Reconnect the battery and test the light on both low and high settings. During routine service, check the lens for cracks, the connector for moisture and the bracket for looseness, and replace the light if any damage is found.

Pro Tip: Apply a small amount of dielectric grease to the connector before fitting the new work light. This helps seal out moisture and prevents corrosion in wet and muddy working conditions.

Quality Assurance – WG9719720020 Work Light

This work light is manufactured in an ISO 9001-certified facility using a die-cast housing, a polycarbonate lens and sealed electrical connectors. Incoming materials are checked for dimensional accuracy, lens clarity and seal quality before assembly begins.

Each light is assembled and sealed on precision lines, then inspected for lens fit, housing integrity, connector alignment and beam pattern. Every batch is functionally tested, and samples receive a water immersion and vibration test before packing.

Batch samples undergo salt spray, temperature cycling and vibration testing to confirm long-term reliability in heavy-duty truck use. These checks help ensure the light performs in the tough conditions Howo trucks face every day.

This work light is covered by a 12-month warranty against material and workmanship defects. Strict quality control means every unit matches the fit, function and durability of the original factory part.

ISO 9001 OEM Validated Water Tested 12-Month Warranty

Why Choose WG9719720020 Work Light for Your SINOTRUK Howo?

The WG9719720020 Work Light is a vital component for maintaining safe night-time visibility, efficient loading operations and reliable maintenance work on your Howo truck. A dim, cracked or flooded light can leave the driver and crew working in dangerous conditions.

Manufactured from quality materials with a sealed housing and impact-resistant lens, this work light offers dependable illumination and long service life. Its direct-fit design keeps installation simple and works with the factory wiring harness and bracket.

Fleet operators benefit from reduced lighting repair downtime, lower maintenance costs and improved night-time safety. Owner-operators gain confidence from a work light that meets strict OEM standards and is backed by a 12-month warranty.

Order the WG9719720020 Work Light today and keep your SINOTRUK Howo illuminated, safe and productive through every shift.

OEM WG9719720020 SINOTRUK Howo Approved Premium Chassis Component
WG9719720020 Work Light – Premium SINOTRUK Howo Chassis Lighting Component

Related Products

Customer Visit

2025-09-28

Kenya Truck Parts Collaboration: DERUNA Empowers Local Distributors to Deepen Presence in Chinese Heavy-Duty Truck Market

DERUNA strengthens its partnership with Kenyan distributors of Howo, Shacman, and FAW trucks. This visit confirmed the high quality of our Kenya Trucks Parts and paved the way for expanding the supply of reliable components to the Kenyan market.
2025-09-25

Strategic Expansion: Howo Parts Niger Partnership Strengthened by Client Visit to DERUNA

DERUNA hosted a client from Niger specializing in Howo Parts Niger. The visit, fueled by the client's positive experience, led to a new合作 plan with customized parts recommendations for the Niger market.
2025-09-25

Boost Your Fleet: Howo Parts Mozambique Success with DERUNA

A leading Mozambican parts intermediary visited DERUNA, expressing high satisfaction with HOWO and Shacman parts. We reviewed local sales data and planned future cooperation for optimal Howo Parts Mozambique supply.
2025-09-24

Strengthening the Partnership: DERUNA Hosts Krasnoyarsk’s Premier HOWO Parts Distributor

Strengthening the Partnership: DERUNA Welcomes the Distributor of Howo Parts Krasnoyarsk for a Strategic Review.
2025-09-23

Building the Future: DERUNA Welcomes Bangladeshi Road Construction Leader for Equipment Review and Strategic Planning

Building the Future: DERUNA Hosts XCMG Shantui Equipment Bangladesh Review with Strategic Partner.
2025-09-23

Strengthening Mining Operations: DERUNA Welcomes Mauritanian Mining Company for Strategic Partnership Review

Strengthening Mining Operations: DERUNA Welcomes Mauritanian Mining Company to Review HOWO Dump Truck and XCMG Excavator Partnership.
Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
Connecting...
Please leave your inquiry and your phone. We will give you feedback within 12 hours.
Our operators are busy. Please try again later
:
:
:
:
Have you got question? Write to us!
:
:
This chat session has ended