- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The WG9000360566 EBS 3.3 Dual-Channel Axle Control Module is a premium, heavy-duty chassis brake component engineered specifically for SINOTRUK Howo trucks, delivering precise electronic braking control and reliable axle load management. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM-grade EBS module as a direct replacement for the original factory unit. The WG9000360566 module ensures correct brake pressure modulation, stable communication with the ABS/EBS system and dependable performance on Howo A7, T7H and related heavy-duty models.
Manufactured from high-strength engineering plastics and corrosion-resistant electrical contacts with sealed connectors, the WG9000360566 EBS 3.3 Dual-Channel Axle Control Module is built to exact OEM dimensions. Its robust construction maintains correct signal processing, resists vibration and temperature extremes and provides dependable performance even under the constant use and electrical loads of commercial truck operation.
OEM WG9000360566 • EBS 3.3 dual-channel • Sealed connectors • Vibration resistant • Direct OEM fit
The WG9000360566 EBS 3.3 Dual-Channel Axle Control Module is a critical electronic component in the braking system of SINOTRUK Howo trucks. It controls the brake pressure on two axle channels, working with the ABS sensors and EBS central module to prevent wheel lock and maintain vehicle stability during braking. The module must process signals accurately, resist vibration and operate reliably in all weather conditions.
This WG9000360566 module is precision-manufactured to exact OEM dimensions. The circuit board is populated with high-quality components, the connectors are sealed against dust and moisture, and the housing is designed for a secure fit on the chassis. The unit is tested for correct signal output and reliable solenoid control.
Common signs that an EBS axle control module needs replacement include ABS/EBS warning lights, uneven braking, wheel lock-up, loss of communication with the brake system and fault codes stored in the ECU. Fitting a new WG9000360566 module restores proper braking control and vehicle safety.
Whether you are repairing a faulty EBS system, replacing a damaged module or carrying out preventive maintenance on a fleet of Howo trucks, the WG9000360566 EBS 3.3 Dual-Channel Axle Control Module delivers the quality, reliability and durability that SINOTRUK Howo professionals expect.
The WG9000360566 EBS 3.3 Dual-Channel Axle Control Module is designed for SINOTRUK Howo trucks, with primary compatibility across the A7, T7H, HOWO 371 and HOWO 380 series equipped with the EBS 3.3 braking system. It is a direct OE replacement, so it plugs into the factory harness and mounts in the original location without modification.
This module is essential in applications where braking safety and vehicle stability are critical, such as long-haul transport, construction, mining and municipal service. In these duties, the module must maintain accurate brake pressure control, resist vibration and temperature extremes and ensure reliable communication with the ABS/EBS central unit.
When replacing the EBS axle control module, it is recommended to inspect the ABS sensors, brake chambers, relay valves, wiring harness and central EBS module for wear or damage. The WG9000360566 is designed to work with the factory brake system components, ensuring correct signal timing and reliable operation. It is suitable for both standard and heavy-duty brake configurations.
For fleets with multiple HOWO trucks, standardising on the WG9000360566 simplifies brake system repair inventory and ensures the correct module is available for scheduled maintenance or emergency repairs.
Replacing the WG9000360566 EBS 3.3 Dual-Channel Axle Control Module is a moderately simple procedure that requires basic electrical knowledge and hand tools. This work should be performed by a qualified technician. Begin by disconnecting the battery negative terminal and releasing air pressure from the brake system.
Locate the EBS axle control module on the chassis. Disconnect the multi-pin connector from the old module, taking note of any locking tabs. Remove the mounting screws or release the clip holding the module in place. Inspect the connector pins for corrosion or damage.
Position the new WG9000360566 module in the mounting bracket and secure it with the original hardware. Reconnect the multi-pin connector until it clicks into place. Reconnect the battery and clear any fault codes using a diagnostic tool. Test the braking system through all functions: ABS, EBS and stability control.
For ongoing maintenance, periodically check that the module is securely mounted and that the connector is free from moisture or dirt. If the braking system becomes intermittent, inspect the ABS sensors and relay valves before replacing the module again. Keeping the module dry and properly connected ensures long-term reliability.
The WG9000360566 EBS 3.3 Dual-Channel Axle Control Module is manufactured in an ISO 9001-certified facility using advanced electronics assembly and testing processes. Components are sourced from certified suppliers and undergo incoming inspection for electrical characteristics, solderability and mechanical fit.
Each module is assembled on automated lines and then tested for relay function, signal timing and current draw. The housing is inspected for correct fit and finish, and the connector is checked for pin alignment and retention. Every unit is subjected to a functional test that simulates brake pressure commands.
Random samples from each production batch undergo environmental testing, including thermal cycling, humidity exposure and vibration, to validate long-term reliability in heavy-duty truck applications. These tests ensure the module continues to perform in the harsh conditions experienced by SINOTRUK Howo vehicles.
We back the WG9000360566 with a comprehensive 12-month warranty against material and workmanship defects. Our rigorous quality control ensures that every EBS axle control module delivers the same fit, function and durability as the original factory component.
The WG9000360566 EBS 3.3 Dual-Channel Axle Control Module is a vital component for maintaining braking safety, vehicle stability and driver confidence on your Howo truck. A faulty EBS module causes ABS/EBS warnings, uneven braking and potential loss of control, especially in emergency situations.
Manufactured from high-quality materials with sealed connectors and robust electronics, the WG9000360566 offers outstanding reliability, moisture resistance and long-term durability. Its plug-and-play design ensures straightforward installation and immediate compatibility with the factory EBS system.
Fleet operators benefit from reduced brake system downtime, lower maintenance costs and improved vehicle safety. Owner-operators gain peace of mind knowing their brakes are controlled by a module that meets strict OEM standards and is backed by a comprehensive warranty.
Order the WG9000360566 EBS 3.3 Dual-Channel Axle Control Module today and keep your SINOTRUK Howo braking safely for years to come.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
