- ADDRESS：Wanda Plaza, Jinan, Shandong, China
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
For SINOTRUK Howo trucks, regular engine and front-end component access is crucial for maintenance and repairs. The cab tilt mechanism is the gateway to this access, and at its heart lies the critical hydraulic cylinder. The genuine WG1664430123 Piston De Volteo De Cabina (Cab Tilt Piston/Cylinder) is engineered to deliver the powerful, smooth, and reliable force needed to safely raise and lower the heavy truck cab. As a premier source for durable Sinotruk howo parts, we provide this OEM component to ensure your maintenance operations are efficient and, above all, safe. The WG1664430123 is built to withstand immense pressure and repeated cycles, featuring a robust design that prevents sudden drops or failures, protecting both technicians and the vehicle itself. Investing in the correct WG1664430123 component is a direct investment in workshop safety, maintenance efficiency, and the long-term integrity of your truck’s cab mounting system.
WG1664430123 Cab Tilt Piston
Поршень наклона кабины WG1664430123
Pistón de Volteo de Cabina WG1664430123
The WG1664430123 is a single-acting hydraulic cylinder that forms the powerhouse of the SINOTRUK Howo’s cab tilting system. Its primary function is to convert hydraulic pressure from the vehicle’s pump into controlled linear mechanical force. When the driver activates the cab tilt switch, pressurized hydraulic fluid enters the cylinder, pushing against the piston. This force causes the piston rod to extend, which in turn acts upon the cab’s mounting mechanism, smoothly and safely lifting the multi-ton cab to its fully tilted position, typically around 70 degrees, for complete engine compartment access.
The WG1664430123 is designed as a “lift-hold-lower” device. It provides the power to raise the cab, incorporates a reliable locking valve or check valve system to hold it securely in the raised position (ensuring technician safety), and then allows for a controlled descent when the release valve is engaged. This controlled lowering is as critical as the lifting action, preventing the cab from slamming down due to gravity, which could cause catastrophic damage to the hinges, panels, or the chassis. The precision and reliability of the WG1664430123 are therefore non-negotiable for safe and effective maintenance workflows.
OEM Fit & Performance: Guarantees perfect connection to the cab tilt mechanism and hydraulic system of Howo trucks.
Powerful & Smooth Lifting: Provides consistent, high-force extension to smoothly raise the heavy cab without strain.
Critical Safety Locking: Integrated valve system securely holds the cab in the tilted position, preventing accidental lowering.
Controlled Descent: Ensures the cab lowers slowly and safely, protecting the cab structure, hinges, and mechanics below.
Robust Construction: Built with high-strength materials and precision seals to withstand high pressure and frequent use.
Maintenance Efficiency: Enables fast, routine access to the engine bay, reducing vehicle downtime for service.
The WG1664430123 cab tilt piston is manufactured to precise dimensional, pressure, and performance standards. The table below details its key technical specifications for correct identification and system compatibility.
| Technical Parameter | Specification / Description |
|---|---|
| OEM Part Number | WG1664430123 |
| Component Type | Single-Acting Hydraulic Tilt Cylinder (Cab) |
| Application | SINOTRUK Howo Truck Cab Tilting System |
| Action | Hydraulically Extended, Gravity Return (with controlled release) |
| Bore Diameter | Engineered for high force output (e.g., 60-80mm range) |
| Stroke Length | Precisely matched to achieve full cab tilt angle |
| Rod Diameter | Heavy-duty to resist bending under full load |
| Mounting Style | Clevis or Trunnion mounts for pivotal movement |
| Primary Function | Safely Lift, Hold, and Lower the Truck Cab for Maintenance Access |
The WG1664430123 is engineered with safety as the paramount concern. The cylinder tube is manufactured from high-tensile strength, seamless steel, capable of containing the high internal hydraulic pressures required to lift the cab. The piston rod is a critical component, made from hardened and chrome-plated steel to resist corrosion, scoring, and bending forces. Its smooth, hard surface is essential for maintaining an effective seal.
The most vital internal components are the seals and the locking valve. Multiple sealing points, including the piston seal, rod seal, and wiper, are made from advanced polyurethane or nitrile compounds compatible with hydraulic oil and resistant to wear and extrusion. The locking valve, often a integrated load-holding check valve, is the key safety feature. It automatically engages to block hydraulic fluid from exiting the cylinder when the pump stops, locking the piston rod in place and preventing the cab from falling even if a hydraulic hose fails. This fail-safe design is what makes the WG1664430123 a trusted component for such a critical function.
High-Pressure Cylinder Tube: Seamless steel construction ensures integrity under maximum system pressure.
Integrated Safety Lock Valve: Prevents accidental cab lowering, providing critical fail-safe protection for technicians.
Hard-Chrome Piston Rod: Provides superior surface hardness for wear resistance and a perfect seal surface.
Heavy-Duty Seal Kit: Advanced materials ensure long-term leak-free operation and resistance to pressure spikes.
Reinforced Mounting Points: Forged clevis or trunnion ends withstand high shear and pivot forces during operation.
Controlled Flow Design: Manages the speed of extension and retraction for smooth, predictable cab movement.
The WG1664430123 is not just a convenience; it is a fundamental enabler of safe and efficient heavy-duty truck maintenance. Without a reliable cab tilt system, technicians would be forced to work in cramped, awkward positions, leading to incomplete inspections, longer repair times, and a higher risk of injury. The powerful and controlled action of the WG1664430123 transforms this task, providing clear, standing access to the entire engine, transmission front, radiator, and steering components.
Its role in safety cannot be overstated. A failing or substandard tilt cylinder poses a severe and immediate danger. Symptoms like creeping descent (the cab slowly sinking), inability to hold position, or jerky movement are major red flags. The OEM-engineered WG1664430123 is designed and tested to eliminate these risks. Its reliable locking function allows technicians to work underneath and around the engine bay with confidence, knowing the several-ton cab is securely held aloft by a certified and robust mechanism. This assurance is a cornerstone of professional workshop practice.
The WG1664430123 is designed as a direct replacement for the original cab tilt cylinder on specific SINOTRUK Howo models. Correct installation is crucial. The vehicle must be on level ground with the cab fully lowered and locked. The hydraulic system must be depressurized according to the service manual before disconnecting any lines. The mounting pins should be inspected for wear and replaced if necessary, as loose pins can cause misalignment and premature cylinder failure.
When installing the new WG1664430123, ensure all mounting points are clean and aligned. Torque mounting bolts to specification. After connection, the hydraulic system may need to be bled of air according to the manufacturer’s procedure to ensure smooth operation. It is also a best practice to inspect the condition of the associated hydraulic hoses, pump, and control valve during replacement, as issues with these components can affect the performance of the new cylinder.
Proactive identification of a failing WG1664430123 is key to preventing unsafe conditions. Common warning signs include: Creeping or Sagging (cab slowly lowers on its own), Failure to Hold Position (cab won’t stay tilted), Slow or Jerky Lifting, Visible Hydraulic Fluid Leaks from the cylinder body or rod, and Unusual Noises (knocking, grinding) during operation. Any of these symptoms warrant immediate inspection and likely replacement.
Preventive maintenance focuses on the entire system. Regularly check the hydraulic fluid level and condition. Inspect the WG1664430123 cylinder and all hoses for signs of leaks, corrosion, or physical damage. Keep the piston rod clean; a scratched or dirty rod can rapidly destroy the rod seal, leading to leaks. Operate the tilt mechanism periodically, even if not needed for service, to keep the system lubricated and identify issues early. Never attempt to force or manually assist the cylinder if it is malfunctioning.
Choosing the genuine WG1664430123 over an aftermarket cylinder is a critical safety and reliability decision. OEM parts are engineered as a system component. The bore size, stroke length, and mounting geometry of the WG1664430123 are precisely matched to the cab’s weight, center of gravity, and tilt kinematics. More importantly, the internal safety valve is calibrated to the specific pressure and flow characteristics of the Howo’s hydraulic system.
Aftermarket cylinders may physically fit but often compromise on these critical specifications. The locking valve may be weaker or non-existent, the seals may be made from inferior materials that degrade quickly, and the metallurgy may not handle repeated stress cycles. Using such a component introduces an unacceptable risk of catastrophic failure. The genuine WG1664430123 provides peace of mind, knowing the component meets all original safety and performance standards, protecting your most valuable assets: your technicians and your truck.
Uncompromised Safety: Integrated OEM safety lock valve provides certified protection against accidental cab drop.
Guaranteed Fit & Function: Perfectly matches the hydraulic pressure, flow, and mechanical geometry of your Howo truck.
Enhanced Workshop Productivity: Enables fast, full access to the engine bay, streamlining all maintenance and repair tasks.
Long-Term Reliability: Premium materials and construction prevent leaks and failures, reducing downtime and repair costs.
Protection of Adjacent Parts: Controlled, smooth operation prevents shock loads that can damage cab hinges and mounts.
Professional Standard: Using the OEM-specified part ensures your maintenance practices meet the highest industry safety standards.
The WG1664430123 Piston De Volteo De Cabina is a vital safety-critical chassis component that underpins efficient and secure maintenance for SINOTRUK Howo trucks. It is far more than a simple hydraulic ram; it is an engineered safety device that guarantees controlled movement and positive locking of the vehicle’s cab.
Opting for this genuine OEM cylinder is the only choice for operators who prioritize technician safety, workshop efficiency, and long-term vehicle integrity. It eliminates the grave risks associated with counterfeit or substandard parts and ensures your truck’s tilting system performs flawlessly for years. Trust the part that was designed for the job. Choose the authentic WG1664430123 cab tilt piston to ensure every maintenance procedure begins with a foundation of absolute safety and reliability.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
