AZ992116080 Clutch Plate
Premium AZ992116080 Clutch Plate for SINOTRUK Howo | Heavy-Duty Chassis Drivetrain Component
2026-09-22
WG9719950110/0111 Wheel Cover
Premium WG9719950110/0111 Wheel Cover for SINOTRUK Howo | Heavy-Duty Chassis Component
2026-09-21

Premium VG1092080017 Fuel Pipe (Wd615.47/69) for SINOTRUK Howo | Heavy-Duty Chassis Fuel Line

PART NO.:
VG1092080017
Part Name:
Fuel Pipe (Wd615.47/69)
Russian Name:
Топливный трубопровод (Wd615.47/69)

The VG1092080017 Fuel Pipe (Wd615.47/69) is a premium, heavy-duty chassis fuel line engineered specifically for SINOTRUK Howo trucks, delivering reliable fuel delivery from the tank to the engine filter and injection pump. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM-grade fuel pipe as a direct replacement for the original factory component. The VG1092080017 pipe ensures leak-free operation, correct fuel pressure and resistance to vibration, heat and corrosion, keeping your Howo A7, T7H or related model running smoothly.

Manufactured from high-strength steel with a corrosion-resistant coating and precision-formed end fittings, the VG1092080017 Fuel Pipe (Wd615.47/69) matches the factory routing and connection points exactly. Its robust construction withstands diesel fuel, engine heat, road salt and constant vibration, providing long service life and dependable performance in the most demanding commercial environments.

OEM VG1092080017 • Wd615.47/69 fitment • Corrosion resistant • Precision formed • Direct OEM fit

VG1092080017 Fuel Pipe (Wd615.47/69)
Fuel Pipe (Wd615.47/69) (EN)
Топливная трубка (Wd615.47/69) (RU)
Tubería de combustible (Wd615.47/69) (ES)
VG1092080017 Fuel Pipe (Wd615.47/69)
Fuel Pipe (Wd615.47/69) (EN)
Топливная трубка (Wd615.47/69) (RU)
Tubería de combustible (Wd615.47/69) (ES)
VG1092080017 Fuel Pipe (Wd615.47/69)
Fuel Pipe (Wd615.47/69) (EN)
Топливная трубка (Wd615.47/69) (RU)
Tubería de combustible (Wd615.47/69) (ES)

Product Overview – VG1092080017 Fuel Pipe (Wd615.47/69)

The VG1092080017 Fuel Pipe (Wd615.47/69) is a critical component of the fuel system on SINOTRUK Howo trucks equipped with the Wd615.47 and Wd615.69 diesel engines. It carries diesel from the fuel tank or lift pump to the fuel filter and high-pressure injection pump, maintaining correct flow and pressure under all operating conditions. A damaged or leaking fuel pipe can cause power loss, hard starting, fuel odour and even engine fire.

This VG1092080017 pipe is precision-manufactured to exact OEM dimensions. The steel tubing is bent to the factory routing, and the end fittings are machined to match the original connectors, ensuring a leak-free seal without adapters or modifications. The outer surface is coated to resist corrosion from road salt, mud and water.

Common signs that a fuel pipe needs replacement include visible cracks or chafing, diesel weeping at the fittings, a strong fuel smell in the engine bay, and engine performance problems caused by air ingress or pressure loss. Fitting a new VG1092080017 pipe restores proper fuel delivery and protects the injection system.

Whether you are repairing a fuel leak, replacing a damaged line or carrying out preventive maintenance on a fleet of Howo trucks, the VG1092080017 Fuel Pipe (Wd615.47/69) delivers the quality, fit and durability that SINOTRUK Howo professionals expect.

Technical Specifications – VG1092080017 Fuel Pipe (Wd615.47/69)

Parameter Specification
OEM Number VG1092080017
Product Name Fuel Pipe (Wd615.47/69)
Brand SINOTRUK Howo
Component Type Chassis / Fuel System (Fuel Pipe)
Weight Approx. 0.45 kg
Material High-strength steel, corrosion-resistant coating
Overall Length 520.0 mm
Outer Diameter 12.0 mm
Connection Type Banjo fitting / threaded union
Working Pressure 0.5 – 1.0 MPa
Operating Temperature -40°C to +120°C
Surface Finish Anti-corrosion coated
Compatible Models HOWO A7, T7H, HOWO 371, HOWO 380 with Wd615.47/69 engines
Certification ISO 9001, OEM validated
All values verified for VG1092080017 Fuel Pipe (Wd615.47/69)

Key Features of VG1092080017 Fuel Pipe (Wd615.47/69)

OEM specification – exact replacement for Howo fuel pipes.
Precision-bent steel tubing – matches factory routing.
Leak-free end fittings – machined to original connector profile.
Corrosion-resistant coating – protects against salt and mud.
Vibration resistant – reliable on rough roads and job sites.
High-temperature rated – stable up to +120°C.
Easy installation – direct bolt-on replacement.
Cost-effective – restores fuel delivery and engine reliability.

Compatibility & Applications – VG1092080017 Fuel Pipe (Wd615.47/69)

The VG1092080017 Fuel Pipe (Wd615.47/69) is designed for SINOTRUK Howo trucks, with primary compatibility across the A7, T7H, HOWO 371 and HOWO 380 series equipped with Wd615.47 or Wd615.69 diesel engines. It is a direct OE replacement, so it connects to the factory fuel filter, lift pump and injection pump without modification.

This fuel pipe is essential in applications where reliable fuel delivery directly affects engine performance, such as long-haul transport, construction, mining and agricultural work. In these duties, the pipe must withstand constant vibration, engine heat and exposure to diesel, oil and road chemicals.

When replacing the fuel pipe, it is recommended to inspect the fuel filter, lift pump, injection pump inlet and all connections for wear or contamination. The VG1092080017 is designed to work with the factory fuel system components, ensuring correct flow and pressure. It is suitable for both standard and heavy-duty fuel configurations.

For fleets with multiple HOWO trucks, standardising on the VG1092080017 simplifies fuel system repair inventory and ensures the correct pipe is available for scheduled maintenance or emergency repairs.

Installation & Maintenance – VG1092080017 Fuel Pipe (Wd615.47/69)

Replacing the VG1092080017 Fuel Pipe (Wd615.47/69) is a moderate procedure that requires mechanical expertise and appropriate tools. This work should be performed by qualified technicians. Begin by disconnecting the battery, relieving fuel system pressure and cleaning the pipe connections to prevent dirt ingress.

Disconnect the fittings at both ends of the old pipe, using a flare nut wrench where applicable to avoid damaging the nuts. Plug the open ports to prevent contamination. Remove the pipe from its retaining clips and withdraw it carefully, noting the routing for the new installation.

Position the new VG1092080017 pipe along the factory routing and secure it in the retaining clips. Connect the fittings by hand first, then tighten them to the specified torque. Do not over-tighten, as this can damage the sealing surfaces. Reconnect the battery and prime the fuel system.

Start the engine and check for leaks at both fittings. Inspect the pipe for contact with other components and adjust the routing if necessary. For ongoing maintenance, inspect the fuel pipe at every service for chafing, corrosion or weeping, and replace it if any damage is found.

Pro Tip: Always use new sealing washers on banjo fittings and never reuse old copper washers. Prime the fuel system thoroughly before cranking the engine to avoid air locks and dry running the injection pump.

Quality Assurance – VG1092080017 Fuel Pipe (Wd615.47/69)

The VG1092080017 Fuel Pipe (Wd615.47/69) is manufactured in an ISO 9001-certified facility using advanced tube bending, welding, machining and coating processes. Raw steel tubing is sourced from certified suppliers and tested for wall thickness, hardness and corrosion resistance before production.

Each pipe is precision-bent to exact OEM dimensions. The end fittings are machined to the correct thread and sealing profile, and the assembly is pressure-tested to confirm leak-free performance. The coating is inspected for coverage and adhesion to ensure long-term protection.

Random samples from each production batch undergo burst pressure testing, vibration testing and salt-spray testing to validate long-term reliability under real-world conditions. These tests ensure the VG1092080017 continues to deliver leak-free fuel delivery throughout its service life.

We back the VG1092080017 with a comprehensive 12-month warranty against material and workmanship defects. Our rigorous quality control ensures that every fuel pipe delivers the same fit, flow and durability as the original factory component.

ISO 9001 OEM Validated Pressure Tested 12-Month Warranty

Why Choose VG1092080017 Fuel Pipe (Wd615.47/69) for Your SINOTRUK Howo?

The VG1092080017 Fuel Pipe (Wd615.47/69) is a vital component for maintaining the power, efficiency and safety of your Howo truck. A damaged or leaking fuel pipe can cause power loss, fuel odour and dangerous fire risk. Replacing it with this genuine OEM-grade pipe restores proper fuel delivery and protects the entire fuel system.

Manufactured from high-strength steel with precision-formed end fittings and a corrosion-resistant coating, the VG1092080017 offers outstanding pressure resistance, flow consistency and long-term durability. Its exact OEM fit ensures straightforward installation and reliable performance.

Fleet operators benefit from reduced fuel system downtime, lower repair costs and improved vehicle reliability. Owner-operators gain peace of mind knowing their engine is fed by a pipe that meets strict OEM standards and is backed by a comprehensive warranty.

Order the VG1092080017 Fuel Pipe (Wd615.47/69) today and keep your SINOTRUK Howo fuel system delivering reliably for years to come.

OEM VG1092080017 SINOTRUK Howo Approved Premium Chassis Component
VG1092080017 Fuel Pipe (Wd615.47/69) – Premium SINOTRUK Howo Chassis and Fuel System Component

Related Products

Customer Visit

2025-09-28

Kenya Truck Parts Collaboration: DERUNA Empowers Local Distributors to Deepen Presence in Chinese Heavy-Duty Truck Market

DERUNA strengthens its partnership with Kenyan distributors of Howo, Shacman, and FAW trucks. This visit confirmed the high quality of our Kenya Trucks Parts and paved the way for expanding the supply of reliable components to the Kenyan market.
2025-09-25

Strategic Expansion: Howo Parts Niger Partnership Strengthened by Client Visit to DERUNA

DERUNA hosted a client from Niger specializing in Howo Parts Niger. The visit, fueled by the client's positive experience, led to a new合作 plan with customized parts recommendations for the Niger market.
2025-09-25

Boost Your Fleet: Howo Parts Mozambique Success with DERUNA

A leading Mozambican parts intermediary visited DERUNA, expressing high satisfaction with HOWO and Shacman parts. We reviewed local sales data and planned future cooperation for optimal Howo Parts Mozambique supply.
2025-09-24

Strengthening the Partnership: DERUNA Hosts Krasnoyarsk’s Premier HOWO Parts Distributor

Strengthening the Partnership: DERUNA Welcomes the Distributor of Howo Parts Krasnoyarsk for a Strategic Review.
2025-09-23

Building the Future: DERUNA Welcomes Bangladeshi Road Construction Leader for Equipment Review and Strategic Planning

Building the Future: DERUNA Hosts XCMG Shantui Equipment Bangladesh Review with Strategic Partner.
2025-09-23

Strengthening Mining Operations: DERUNA Welcomes Mauritanian Mining Company for Strategic Partnership Review

Strengthening Mining Operations: DERUNA Welcomes Mauritanian Mining Company to Review HOWO Dump Truck and XCMG Excavator Partnership.
Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
Connecting...
Please leave your inquiry and your phone. We will give you feedback within 12 hours.
Our operators are busy. Please try again later
:
:
:
:
Have you got question? Write to us!
:
:
This chat session has ended