- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The 810W26484-0009 Control Valve is a premium, heavy-duty chassis pneumatic component engineered specifically for SINOTRUK Howo trucks, delivering precise air pressure regulation for the braking and auxiliary air systems. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM-grade control valve as a direct replacement for the original factory unit. The valve ensures correct pressure modulation, stable air flow and dependable operation on Howo A7, T7H and related heavy-duty models.
Manufactured from high-strength brass body, corrosion-resistant internal springs and precision-machined sealing surfaces, the 810W26484-0009 Control Valve is built to exact OEM dimensions. Its robust construction maintains correct pressure output, resists vibration, oil, water and temperature extremes, and provides dependable performance under the constant cycling and load demands of commercial truck operation.
OEM 810W26484-0009 • Pneumatic control • Sealed ports • Vibration resistant • Direct OEM fit
The 810W26484-0009 Control Valve is a critical pneumatic component in the chassis air system of SINOTRUK Howo trucks. It regulates the air pressure supplied to the braking system and auxiliary air circuits, ensuring that pressure stays within the correct operating range for safe and efficient vehicle operation.
This 810W26484-0009 valve is precision-manufactured to exact OEM dimensions. The brass body is machined for accurate bore alignment, the internal spring and diaphragm are calibrated for the correct pressure setting, and the threaded ports match the factory air line fittings exactly. Every unit is tested for correct cracking pressure and leak-free sealing.
Common signs that a control valve needs replacement include low or unstable air pressure, a constantly running air compressor, air leaks at the valve body, brake system warning lamps and fault codes in the air management ECU. Fitting a new 810W26484-0009 valve restores correct pressure regulation and reliable braking performance.
Whether you are repairing a faulty air system, replacing a worn valve or carrying out preventive maintenance on a fleet of Howo trucks, the 810W26484-0009 Control Valve delivers the quality, reliability and durability that SINOTRUK Howo professionals expect.
The 810W26484-0009 Control Valve is designed for SINOTRUK Howo trucks, with primary compatibility across the A7, T7H, HOWO 371 and HOWO 380 series. It is a direct OE replacement, so it threads into the original air line fittings and mounts in the factory location without modification.
This valve is essential in applications where reliable air pressure regulation is critical, such as long-haul transport, construction, mining and municipal service. In these duties, the valve must maintain correct pressure output and resist vibration, oil, water and temperature extremes.
When replacing the control valve, it is recommended to inspect the air compressor, air dryer, reservoir, governor and air lines for wear or damage. The 810W26484-0009 is designed to work with the factory air system, ensuring correct pressure regulation and reliable braking performance.
For fleets with multiple HOWO trucks, standardising on the 810W26484-0009 Control Valve simplifies air system repair inventory and ensures the correct valve is available for scheduled maintenance or emergency repairs.
Replacing the 810W26484-0009 Control Valve is a straightforward procedure that requires basic pneumatic knowledge and hand tools. This work should be performed by a qualified technician. Begin by releasing air pressure from the relevant circuit and disconnecting the battery negative terminal.
Locate the control valve on the chassis or air management block. Disconnect the air lines and electrical connector from the old valve, taking note of the port orientation. Remove the mounting bolts or unscrew the valve from the block. Inspect the ports and threads for damage.
Fit the new 810W26484-0009 valve into position and tighten it to the correct torque. Reconnect the air lines and electrical connector, ensuring the seals are correctly seated. Restore air pressure and check for leaks. Test the air system function and clear any fault codes using a diagnostic tool.
For ongoing maintenance, periodically check the valve for leaks, drain the air reservoirs and replace the air dryer cartridge as scheduled. If pressure becomes unstable, inspect the compressor and governor before replacing the valve again.
The 810W26484-0009 Control Valve is manufactured in an ISO 9001-certified facility using high-strength brass and precision-machined internal components. Raw materials are sourced from certified suppliers and undergo incoming inspection for material grade, dimensional accuracy and seal quality.
Each valve is assembled on precision lines and then tested for cracking pressure, flow rate, seal integrity and leak-free operation. The ports are checked for thread alignment, and the body is inspected for correct fit and finish. Every unit is subjected to a functional pressure test before packing.
Random samples from each production batch undergo environmental testing, including thermal cycling, humidity exposure, vibration and salt spray, to validate long-term reliability in heavy-duty truck applications. These tests ensure the valve continues to perform in the harsh conditions experienced by SINOTRUK Howo vehicles.
We back the 810W26484-0009 with a comprehensive 12-month warranty against material and workmanship defects. Our rigorous quality control ensures that every control valve delivers the same fit, function and durability as the original factory component.
The 810W26484-0009 Control Valve is a vital component for maintaining correct air pressure, reliable braking and vehicle safety on your Howo truck. A faulty valve causes unstable pressure, a constantly running compressor and potential brake performance issues, especially under heavy loads.
Manufactured from high-strength brass with precision internal components and sealed ports, the 810W26484-0009 offers outstanding reliability, pressure stability and long-term durability. Its direct-fit design ensures straightforward installation and immediate compatibility with the factory air system.
Fleet operators benefit from reduced air system downtime, lower maintenance costs and improved vehicle availability. Owner-operators gain peace of mind knowing their braking and auxiliary air systems are regulated by a valve that meets strict OEM standards and is backed by a comprehensive warranty.
Order the 810W26484-0009 Control Valve today and keep your SINOTRUK Howo air system performing safely for years to come.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
