- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The 201V95800-7477 Tension Wheel is a critical chassis component that ensures proper drive belt tension in your SINOTRUK Howo truck. As a genuine Sinotruk howo parts assembly, this tension wheel is engineered to maintain optimal belt wrap, reduce vibration, and extend the service life of the accessory drive system. Built for the harsh demands of heavy hauling and off‑road operation, the 201V95800-7477 ensures that your alternator, water pump, and air compressor operate reliably under all conditions.
The 201V95800-7477 Tension Wheel is a direct OEM replacement designed for SINOTRUK Howo trucks equipped with multi‑ribbed serpentine belts or conventional V‑belt drives. Featuring a robust steel‑backed pulley with a precision‑ground bearing surface, this tension wheel provides consistent belt tension throughout its service life. The unit is pre‑lubricated with high‑temperature grease and sealed against contaminants, ensuring smooth rotation and minimal wear even in dusty or wet environments. By maintaining the correct belt tension, the 201V95800-7477 prevents belt squeal, glazing, and premature failure of driven components.
Internal spring mechanism ensures steady belt force, compensating for stretch and wear.
Precision ball bearing with dual seals handles up to 10,000 RPM with low friction.
E‑coated surface resists rust and pitting from road salt and moisture.
Matches OEM mounting bracket and pulley offset – no modifications needed.
The 201V95800-7477 Tension Wheel is a vital chassis‑level component that directly impacts the reliability of the engine’s accessory drive. A failing tensioner can cause belt slippage, resulting in undercharged batteries, overheating, or loss of power steering assist. By installing this genuine SINOTRUK part, you restore the factory‑spec tension and alignment, ensuring that all belt‑driven accessories operate at peak efficiency. This reduces unplanned downtime and lowers overall maintenance costs for fleet operators.
The 201V95800-7477 Tension Wheel is engineered with a high‑grade bearing that is pre‑packed with synthetic grease for low‑friction operation over a wide temperature range. The pulley itself is stamped from high‑strength steel and precision‑machined to ensure perfect concentricity, reducing runout and belt flutter. In accelerated life testing, this tensioner maintained its specified belt load for over 250,000 cycles without significant loss of tension – far exceeding the performance of many aftermarket units.
The torsion spring inside the tensioner arm is made from chrome‑silicon steel and heat‑treated to resist fatigue. This ensures that the tensioner maintains the correct belt force even after years of thermal cycling and vibration. Additionally, the pulley surface is treated with a micro‑textured coating that improves belt grip and reduces wear on the belt ribs. For fleet operators, this translates to fewer belt replacements, less downtime, and predictable maintenance intervals.
Replacing the tension wheel with the 201V95800-7477 is a simple job that requires only basic hand tools. The unit comes with the mounting bolt pre‑installed and the correct torque specification marked on the package. Simply remove the old tensioner, clean the mounting surface, and install the new unit, tightening the bolt to the factory‑recommended torque (typically 45–55 Nm). The spring‑loaded arm automatically sets the correct belt tension, so no manual adjustment is needed. Always inspect the drive belt and replace it if worn to ensure optimal performance of the new tensioner.
The 201V95800-7477 is compatible with all SINOTRUK Howo and Sitrak models that use the standard accessory drive layout, including those with air conditioning and engine braking systems. It also fits certain construction equipment and special‑purpose vehicles built on the Howo platform. Always verify the belt routing and pulley alignment against your vehicle’s specifications to ensure proper fitment.
Every 201V95800-7477 Tension Wheel is manufactured under strict quality control procedures, including 100% bearing runout inspection and spring force verification. The assembly is tested for smooth rotation and absence of abnormal noise before it leaves the factory. The OEM number is permanently laser‑engraved on the body, providing clear traceability and confirming authenticity.
The corrosion‑resistant coating is applied using an electrophoretic deposition process, ensuring uniform coverage and long‑term protection against salt spray and chemical exposure. This attention to detail makes the 201V95800-7477 a reliable choice for vehicles operating in coastal areas or during winter road maintenance, where rust is a common cause of premature tensioner failure.
The 201V95800-7477 Tension Wheel is packaged in a durable cardboard box with a formed plastic insert that holds the unit securely and prevents the pulley from being scratched or dented. The box is clearly labelled with the SINOTRUK logo, part number, and a barcode for easy warehouse scanning. Each unit is also sealed in a moisture‑barrier bag to prevent corrosion during long‑term storage.
The 201V95800-7477 Tension Wheel is a genuine SINOTRUK OEM chassis component, engineered for direct replacement on Howo T7H, Sitrak C7H/C9H, Howo TX, and Howo G7S trucks (2016–2023). Inspect the drive belt condition and replace if worn to ensure optimal performance.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
