- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The 10pk1043 Fan Belt is a premium, heavy-duty chassis engine drive belt engineered specifically for SINOTRUK Howo trucks, delivering reliable power transmission to the fan, alternator, water pump and air conditioning compressor. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM-grade fan belt as a direct replacement for the original factory component. The 10pk1043 belt ensures proper accessory drive, prevents slippage and overheating, and withstands the constant flexing, heat and tension of commercial diesel engine operation.
Manufactured from high-quality EPDM rubber with strong polyester cords and a wear-resistant rib profile, the 10pk1043 Fan Belt maintains stable friction and dimensional stability across a wide temperature range. Its 10-rib PK profile and 1043 mm effective length match the factory pulley layout exactly, ensuring a snug fit and correct alignment on all driven accessories.
OEM 10pk1043 • 10-rib PK profile • EPDM rubber • Heat and oil resistant • Direct OEM fit
The 10pk1043 Fan Belt is a multi-rib drive belt used on SINOTRUK Howo diesel engines to power the cooling fan, alternator, water pump, power steering pump and air conditioning compressor. It wraps around the crankshaft pulley and the accessory pulleys, transmitting torque through its ribbed inner surface. A worn or broken fan belt can cause overheating, battery drain, loss of power steering and engine damage.
This 10pk1043 belt is precision-manufactured to exact OEM dimensions. The 10-rib PK profile, 1043 mm effective length and correct cord construction ensure proper fit and tension on the factory pulley system. The EPDM rubber compound resists heat, oil, ozone and abrasion, providing long service life even in the harsh engine bay environment.
Common signs that a fan belt needs replacement include visible cracks, fraying or missing ribs, glazing or hardening of the rubber, squealing or chirping noises, belt slippage under load, and overheating or battery warning lights. Fitting a new 10pk1043 belt restores proper accessory drive and protects the engine from damage.
Whether you are replacing a worn belt, servicing the accessory drive or carrying out preventive maintenance on a fleet of Howo trucks, the 10pk1043 Fan Belt delivers the quality, fit and durability that SINOTRUK Howo professionals expect.
The 10pk1043 Fan Belt is designed for SINOTRUK Howo trucks, with primary compatibility across the A7, T7H, HOWO 371 and HOWO 380 series equipped with standard diesel engines and multi-rib accessory drives. It is a direct OE replacement, so it fits the factory pulleys and tensioner without modification.
This belt is essential in applications where reliable accessory drive directly affects engine cooling, charging and steering, such as long-haul transport, construction, mining and municipal service. In these duties, the belt must maintain tension, resist heat and oil, and avoid slippage that could cause overheating or loss of power steering.
When replacing the fan belt, it is recommended to inspect the tensioner, idler pulleys, crankshaft pulley and accessory pulleys for wear, misalignment or bearing noise. The 10pk1043 belt is designed to work with the factory accessory drive components, ensuring correct alignment and reliable operation. It is suitable for both standard and heavy-duty engine configurations.
For fleets with multiple HOWO trucks, standardising on the 10pk1043 simplifies belt maintenance inventory and ensures the correct belt is always available for scheduled service or emergency replacement.
Replacing the 10pk1043 Fan Belt is a relatively simple procedure that requires basic hand tools and care. This work can be performed by a qualified technician or a knowledgeable owner-operator. Begin by disconnecting the battery negative terminal and noting the belt routing on the pulleys.
Release the tensioner using a suitable wrench to relieve belt tension. Slip the old belt off the pulleys and inspect it for wear patterns that may indicate pulley misalignment. Check the tensioner and idler pulleys for smooth rotation and replace any worn components before fitting the new belt.
Route the new 10pk1043 belt around the pulleys following the factory diagram, ensuring the ribs seat correctly in each groove. Apply tension using the tensioner and check that the belt is centred on all pulleys. Reconnect the battery and start the engine.
After installation, run the engine and check for unusual noise or belt movement. Inspect the belt for correct tracking and tension. For ongoing maintenance, inspect the belt at every service for cracks, glazing or missing ribs, and replace it if any damage is found. Keeping the belt in good condition ensures reliable accessory drive and engine cooling.
The 10pk1043 Fan Belt is manufactured in an ISO 9001-certified facility using advanced rubber compounding, cord treatment, extrusion and curing processes. Raw materials are sourced from certified suppliers and tested for tensile strength, elongation and heat resistance before production.
Each belt is precision-built to exact OEM dimensions. The rib profile is formed to the correct angle and spacing, the cord layer is positioned for optimal strength, and the belt length is verified using automated measuring equipment. Every belt is inspected for surface defects and dimensional accuracy.
Random samples from each production batch undergo fatigue testing, heat aging and oil resistance testing to validate long-term reliability under real-world engine conditions. These tests ensure the 10pk1043 continues to deliver reliable power transmission throughout its service life.
We back the 10pk1043 with a comprehensive 12-month warranty against material and workmanship defects. Our rigorous quality control ensures that every fan belt delivers the same fit, performance and durability as the original factory component.
The 10pk1043 Fan Belt is a critical component for maintaining engine cooling, battery charging and power steering on your Howo truck. A worn or broken belt can cause overheating, loss of steering assist and a discharged battery, leaving you stranded. Replacing it with this genuine OEM-grade belt restores reliable accessory drive.
Manufactured from high-quality EPDM rubber with strong polyester cords and a wear-resistant rib profile, the 10pk1043 offers outstanding heat resistance, oil resistance and long-term durability. Its exact OEM fit ensures straightforward installation and reliable performance.
Fleet operators benefit from reduced roadside breakdowns, lower maintenance costs and improved vehicle uptime. Owner-operators gain peace of mind knowing their engine accessories are driven by a belt that meets strict OEM standards and is backed by a comprehensive warranty.
Order the 10pk1043 Fan Belt today and keep your SINOTRUK Howo running cool and charging reliably for years to come.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
