- ADDRESS：Wanda Plaza, Jinan, Shandong, China
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
In the harsh operating environment of heavy-duty trucks, protecting vital mechanical joints from contamination is paramount for longevity and reliability. The SHACMAN Bellows, identified by the genuine OEM part number DZ97319543736, is a flexible, accordion-style protective cover designed to shield critical components like steering knuckle joints and axle shafts from dirt, water, grit, and corrosive elements. This essential part acts as a durable barrier, preserving lubrication and preventing premature wear of expensive underlying parts. Sourcing this specific component from our extensive collection of Shacman truck parts guarantees a perfect fit and material quality that matches the original equipment.
The DZ97319543736 is molded from high-grade, weather-resistant elastomers that remain flexible across a wide temperature range, ensuring consistent protection whether operating in freezing cold or scorching heat. By keeping contaminants out and grease in, this bellows significantly extends the service interval of the joint it protects, reducing maintenance costs and preventing unexpected failures that can lead to downtime. Investing in the genuine DZ97319543736 is a proactive step towards preserving your truck’s steering integrity and driveline components.
Bellows
Сильфон
Fuelle
The fundamental role of the DZ97319543736 Bellows is to create a sealed, flexible environment around a moving joint. Typically installed on steering knuckle ball joints, axle constant velocity (CV) joints, or other linkage points, it forms a protective sleeve that expands and contracts with the joint’s articulation.
Its primary mission is to exclude abrasive contaminants such as road dust, sand, mud, and saltwater spray from entering the joint. Simultaneously, it retains the essential grease lubricant packed inside the joint during assembly or maintenance. By performing this dual function, the bellows prevents the grinding paste effect that occurs when grit mixes with grease, which rapidly wears down precision-machined bearing surfaces. This protective action of the DZ97319543736 is critical for maintaining low friction, smooth operation, and the structural integrity of the joint over thousands of kilometers.
The effectiveness of the DZ97319543736 is rooted in its material composition. It is typically manufactured from synthetic rubber compounds like thermoplastic elastomer (TPE) or reinforced nitrile rubber. These materials are selected for their exceptional elasticity, allowing the bellows to repeatedly fold and unfold without cracking or developing stress fractures.
They are compounded to resist degradation from ozone, UV radiation, and various automotive fluids such as oil, grease, and brake fluid. Furthermore, the material must maintain its flexibility in extreme temperatures, from -40°C to over 100°C, ensuring it doesn’t become brittle in winter or overly soft and prone to tearing in summer. The internal and external surfaces of the DZ97319543736 are often smooth to prevent dirt from adhering and to allow for easy cleaning during inspections.
The DZ97319543736 finds specific application in key areas of the SHACMAN truck. One common use is on the steering knuckle, where it covers the upper and lower kingpin or ball joint assemblies. In this location, it protects the joint that allows the front wheels to turn. Another critical application is on the front axle’s constant velocity (CV) joints of all-wheel-drive models, where it contains the special grease and protects the complex inner mechanism from dirt and moisture.
The bellows may also be used on suspension link joints or shift linkage components. In each application, the DZ97319543736 is designed with a specific shape, diameter, and length to fit the spatial constraints and range of motion of that particular joint, ensuring it never restricts movement or becomes pinched during full suspension travel or steering lock.
Proper installation of the DZ97319543736 is crucial for its function. The bellows is usually installed as part of a joint overhaul or replacement. It slides over the joint and is secured at both ends with specialized hose clamps or crimp bands. These clamps must be tightened to the correct specification to create a permanent, water-tight seal without cutting into the rubber material.
The sealing surfaces on the axle or linkage must be clean and smooth. Incorrect installation, such as twisting the bellows or using the wrong clamp, can compromise the seal immediately. The genuine DZ97319543736 is supplied with or is compatible with the correct OEM clamping system, ensuring a reliable seal that will last for the long term under constant vibration and movement.
| Specification | Detail |
|---|---|
| OEM Part Number | DZ97319543736 |
| Product Name | Bellows / Protective Boot |
| Brand | SHACMAN |
| Primary Material | Thermoplastic Elastomer (TPE) |
| Application | Steering Knuckle, Axle Joint |
| Color | Black (Standard) |
| Temperature Range | -40°C to +120°C |
| Compatible Models | SHACMAN X3000, F3000, M3000 Series |
A compromised DZ97319543736 Bellows leads to rapid joint failure. The most obvious sign is visible cracking, tearing, or a complete split in the rubber material. Grease leakage around the joint or thrown onto surrounding components is a clear indicator that the seal is broken. Conversely, contamination ingress often leads to audible symptoms: a clicking or popping noise from a CV joint during turns, or grinding and creaking from a dry steering joint. Once the protective function is lost, the joint wears out quickly. Replacing a damaged bellows like the DZ97319543736 promptly is far more economical than replacing the entire steering knuckle assembly, CV joint, or axle shaft, which can cost ten times more and cause significant vehicle downtime.
Regular visual inspection of the DZ97319543736 and other bellows is a key part of routine truck maintenance. During service intervals, technicians should check for any signs of physical damage, perishing (small cracks in the rubber), swelling from fluid contamination, or loose clamps. The bellows should be flexible, not hardened or brittle. Many maintenance schedules recommend replacing bellows preventively when other related components are serviced, as their cost is low compared to the risk of joint failure. When replacing, it is critical to clean the joint thoroughly, repack it with the correct type and amount of grease, and install the new DZ97319543736 with fresh clamps to ensure another long service life.
While seemingly a simple rubber cover, the DZ97319543736 plays a direct role in vehicle safety. A steering joint that fails due to a torn bellows can lead to sudden changes in steering feel, looseness, or in extreme cases, a partial loss of steering control, especially under load. A failed CV joint bellow can cause the joint to seize or disintegrate, potentially leading to a loss of drive or even a wheel lock-up. Therefore, maintaining the integrity of these protective covers is not just a matter of component longevity but is integral to maintaining predictable, safe vehicle handling and drivability, particularly important for heavy trucks operating on public roads.
Choosing the genuine SHACMAN DZ97319543736 over a universal “one-size-fits-all” boot is highly advisable. The OEM part is precisely molded to the contours, lengths, and diameters required for a specific joint on a specific truck model. This ensures optimal folding characteristics without binding or stretching thin at full articulation. Universal boots often require trimming, may have incorrect wall thickness, or use inferior rubber that cracks quickly. The genuine DZ97319543736 guarantees a perfect seal from day one, proper clearance with surrounding components, and material properties tested for the specific application, ensuring reliable performance and avoiding the need for a premature redo of the repair job.
The internal environment of the bellows is also important. The DZ97319543736 material must be chemically compatible with the specific grease used in the joint. OEMs specify a grease type (e.g., lithium-based, molybdenum disulfide) that works optimally with the joint’s bearings and the bellows material. Using an incorrect grease can cause the rubber to swell, soften, or degrade, leading to early failure of the DZ97319543736. When performing a repair, it is essential to use the grease specified by SHACMAN for that joint to ensure the longevity of both the new components and the protective bellows itself. The genuine part is designed with this compatibility in mind.
For SHACMAN trucks operating in construction, mining, or forestry, the DZ97319543736 Bellows faces exceptional challenges. It must resist abrasion from flying rocks and debris, punctures from branches, and constant exposure to mud and water. The robust construction of the OEM part is designed for such duty. Some heavy-duty bellows even feature external ribs or a thicker gauge material in high-wear areas. In these environments, inspection frequency should increase. The durability of the DZ97319543736 under these conditions is critical to preventing joint failures that could strand a vehicle in a remote or hazardous location, leading to high recovery costs and operational delays.
Correct identification is key when ordering a replacement bellows. Always use the OEM number DZ97319543736. Additionally, note the exact location on the truck (e.g., left front steering knuckle upper, right inner CV joint) and your truck’s model and VIN. While bellows may look similar, small differences in length, collar diameter, or the number of convolutions (folds) can make another part incompatible. Providing this information ensures you receive the DZ97319543736 variant that matches your specific application, preventing installation issues and ensuring the joint is properly protected for the long haul.
The SHACMAN DZ97319543736 Bellows is a perfect example of a small, low-cost component that plays an outsized role in protecting expensive and safety-critical systems. By shielding steering and driveline joints from contamination, it directly prevents costly repairs and promotes reliable vehicle operation. Its specialized material and precise OEM design ensure it can withstand the motion, temperature, and environmental extremes of commercial trucking. Regular inspection and timely replacement of the DZ97319543736, using the genuine part, is a fundamental and wise maintenance practice. It preserves the health of major chassis components, enhances safety, and contributes significantly to reducing the total operating cost of your SHACMAN truck over its lifetime.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
