- ADDRESS：Wanda Plaza, Jinan, Shandong, China
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
Precision steering and vibration damping are essential for safe and comfortable operation of heavy-duty trucks. The genuine SINOTRUK HOWO WG1630840324 1# Steering Gear (Internal Damper) is an OEM-grade component that integrates a hydraulic damper within the steering gear to absorb road shocks and reduce steering wheel kickback. As a critical part of the trusted Sinotruk howo parts family, this steering gear ensures precise control, reduced driver fatigue, and enhanced vehicle stability in the most demanding conditions. Engineered for durability and exact fitment, the WG1630840324 unit withstands high loads and continuous operation in construction, mining, and long-haul applications. Investing in this authentic component restores factory steering feel and extends the life of your truck’s steering system.
1# Steering Gear (Internal Damper)
Рулевой механизм №1 (с внутренним демпфером)
The WG1630840324 steering gear integrates a recirculating ball mechanism with an internal hydraulic damper. The recirculating ball design provides smooth, low-friction operation and high load capacity, essential for heavy trucks. The internal damper consists of a hydraulic cylinder and piston integrated into the gear housing, which resists sudden movements from road impacts, effectively dampening steering wheel kickback and vibrations. This results in more stable straight-line driving and reduced driver effort during maneuvers.
The housing is precision-cast from high-strength iron, ensuring rigidity and durability under extreme loads. All internal components, including the worm shaft, ball nut, and bearings, are manufactured to tight tolerances and hardened for long service life. The integrated damper is sealed and filled with hydraulic fluid, requiring no external adjustment or maintenance. This design not only improves ride comfort but also protects the steering linkage and tires from excessive wear caused by road shock.
The table below provides detailed technical specifications for the genuine SINOTRUK HOWO WG1630840324 1# Steering Gear with Internal Damper. This data is essential for verifying compatibility and understanding the component’s capabilities.
| Parameter | Specification | Details |
|---|---|---|
| OEM Part Number | WG1630840324 | SINOTRUK HOWO Original Code |
| Product Name | 1# Steering Gear (Internal Damper) | Recirculating ball with hydraulic damper |
| Type | Recirculating Ball | Integral power steering (if equipped) |
| Steering Ratio | 22:1 to 26:1 (model dependent) | Optimized for heavy vehicles |
| Input Shaft Spline | 36 spline (typical) | Matches steering column |
| Output Shaft | Tapered with keyway / splined | Connects to pitman arm |
| Maximum Output Torque | > 6,000 Nm | Handles heavy loads |
| Operating Pressure | Up to 150 bar (power steering) | Hydraulic assist |
| Damper Type | Integrated hydraulic | Internal, sealed |
| Housing Material | Ductile iron / cast steel | High strength |
| Weight (approx.) | 35 kg | Robust construction |
| Compatible Models | SINOTRUK HOWO series trucks | Check chassis and steering system |
Replacing the steering gear is a complex procedure best performed by qualified technicians. It involves safely raising the front of the vehicle, disconnecting the steering column shaft, pitman arm, and hydraulic lines (if power-assisted). The old gear is unbolted from the chassis frame. The new genuine WG1630840324 unit must be aligned correctly, with the input shaft centered and the output shaft positioned for proper pitman arm orientation. All bolts must be torqued to manufacturer specifications. After installation, the steering system must be bled of air, and the front end alignment checked.
The WG1630840324 steering gear is a direct OEM replacement designed for specific SINOTRUK HOWO models. Compatibility must be verified by matching the part number with your vehicle’s VIN and steering system type. Using the correct gear ensures proper steering ratio, input shaft spline match, and hydraulic flow. Always use new O-rings and seals during installation. After installation, a thorough steering check and road test are essential to ensure safe operation.
When replacing the steering gear, also inspect the steering linkage, tie rod ends, and pitman arm for wear. Replace any worn components to ensure optimal steering performance and safety.
The integrated damper in the WG1630840324 steering gear absorbs road shocks, reducing steering wheel kickback and improving directional stability. This results in less driver effort and greater control, especially on rough terrain.
By smoothing out vibrations and kickback, the internal damper significantly reduces the physical demands on the driver during long hours behind the wheel. This improves comfort and alertness, contributing to overall safety.
The damping action protects the entire steering linkage, including tie rods and ball joints, from excessive shock loads. This reduces wear and extends the service life of these components, lowering maintenance costs.
Common symptoms of a failing steering gear include excessive free play in the steering wheel (looseness), difficulty steering (heavy steering), unusual noises (clunking or whining) when turning, and fluid leaks from the gear housing. If the internal damper fails, you may notice increased steering wheel kickback and vibrations. If you experience any of these issues, have the steering system inspected immediately. Replacing a worn gear with a genuine WG1630840324 unit restores proper steering response and safety.
Delaying replacement can lead to loss of steering control, increasing the risk of accidents. A worn gear can also cause uneven tire wear and put stress on other steering components. Prompt action with OEM parts ensures your SINOTRUK HOWO remains safe and reliable.
To maximize the life of your steering gear, maintain proper power steering fluid level and quality (if applicable). Regularly inspect the gear for leaks, damage, or loose mounting bolts. Check the steering linkage for wear. During routine service, have the front end alignment checked. If the vehicle is used in severe conditions, more frequent inspections are recommended.
Always use genuine SINOTRUK HOWO replacement parts for any steering system repairs. Following these practices will help ensure your truck’s steering remains precise and reliable for years to come.
The steering gear is a safety-critical component. Generic aftermarket gears may use inferior materials, have incorrect ratios, or lack the precision of the original, leading to poor steering feel and potential failure. The genuine SINOTRUK HOWO WG1630840324 steering gear is manufactured to the exact specifications of your truck, ensuring proper fit, function, and durability. It incorporates the integrated damper design exactly as engineered, providing the intended level of vibration control.
By choosing the authentic part, you guarantee reliable steering performance, enhanced safety, and peace of mind. For fleet managers and owner-operators who prioritize uptime and safety, the genuine WG1630840324 is the only responsible choice.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
