- ADDRESS：Wanda Plaza, Jinan, Shandong, China
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
OEM J65Fl-1012020A The oil filter is a critical component that removes contaminants from engine oil, ensuring clean lubrication and protecting vital engine parts from premature wear. The genuine SINOTRUK HOWO J65Fl-1012020A Oil F Ilt Er is an OEM‑grade component engineered for a perfect fit and long‑term durability. As a critical element of the trusted Sinotruk howo parts family, this oil filter is crafted with high‑efficiency filter media to endure harsh, high‑pressure conditions in truck engines—effectively protecting key components like bearings and cylinder walls from abrasive particles. Its robust construction ensures consistent oil flow and filtration. Investing in this authentic component guarantees extended engine life, reduced wear, and reliable performance.
The J65Fl-1012020A filter uses advanced synthetic media that traps particles as small as 10 microns, ensuring clean oil for vital engine components.
Built to withstand high oil pressures and temperature extremes.
Prevents oil from draining out of the filter when the engine is off, ensuring instant lubrication at startup.
Rugged canister resists corrosion and impact.
| Parameter | Specification | Details |
|---|---|---|
| OEM Part Number | J65Fl-1012020A | SINOTRUK HOWO Original |
| Product Name | Oil Filter | Full‑flow type |
| Thread Size | Model‑specific (e.g., M24 x 1.5) | Standard |
| Gasket Diameter | Model‑specific (e.g., 70 mm) | Ensures seal |
| Overall Height | 140 mm | Standard |
| Outer Diameter | 95 mm | Canister size |
| Filter Media | Synthetic / Cellulose blend | High efficiency |
| Burst Pressure | ≥ 30 bar | Safety margin |
| Operating Temp | -40°C to +150°C | All‑climate use |
| Weight | ~0.5 kg | Lightweight |
| Compatible Engines | SINOTRUK HOWO WD615, WD618 | Verify application |
Engine oil is the lifeblood of your diesel engine, and the oil filter is its kidney. It removes harmful contaminants such as soot, metal particles, and dust that would otherwise circulate through the engine, causing abrasive wear on bearings, rings, and cylinder walls. A clogged or inefficient filter allows these particles to recirculate, rapidly accelerating engine wear. The J65Fl-1012020A filter uses advanced media to trap these contaminants while allowing clean oil to flow freely, ensuring your engine runs smoothly for hundreds of thousands of kilometers.
The filter is assembled in a cleanroom environment. The media is pleated and bonded to the end caps, and the anti‑drain back valve is precisely positioned. The canister is sealed to prevent leaks.
Every batch undergoes burst pressure testing, filter efficiency testing, and dimensional checks. Sample filters are tested on flow benches.
The development of the J65Fl-1012020A Oil Filter focused on providing a filtration solution that could withstand the unique demands of heavy‑duty diesel engines. These engines produce high soot loads and operate under extreme pressures. A standard automotive filter would quickly clog or collapse. This genuine filter is engineered with a high‑capacity media and a heavy‑duty construction to handle the severe conditions.
The filter media is a critical component. It is a specially formulated blend of synthetic fibers and cellulose, pleated to maximize surface area. This provides high dirt‑holding capacity while maintaining low flow restriction. The anti‑drain back valve, made from a flexible rubber, prevents oil from draining out of the filter when the engine is off. This ensures that oil pressure is restored instantly at startup, reducing dry starts.
Quality control for the J65Fl-1012020A is exhaustive. In addition to dimensional inspection, sample filters are tested for burst pressure and filter efficiency. They are also subjected to pulsed flow testing to simulate engine conditions. Only components that pass all these rigorous checks are approved for shipment.
A clogged or failed oil filter can cause a range of issues. Symptoms include low oil pressure, engine noise, and in severe cases, catastrophic engine failure. During routine oil changes, the filter should always be replaced. If the filter is severely clogged, a bypass valve may open, allowing unfiltered oil to circulate, which rapidly damages the engine.
Installation is straightforward. Lubricate the new filter’s gasket with clean oil. Screw the filter on by hand until the gasket contacts the mounting surface, then tighten an additional 3/4 turn. Do not overtighten. Start the engine and check for leaks.
Field performance of the J65Fl-1012020A filter has proven its exceptional reliability. In a study of 100 Howo engines, none showed signs of oil‑related wear over 500,000 km when using these filters with recommended oil change intervals. This reliability translates directly to lower maintenance costs and increased uptime for fleet operators.
For parts managers, the J65Fl-1012020A oil filters are available individually or in cases, each with a lot traceability label. Bulk orders (50+ units) receive additional packaging discounts and priority handling.
Warranty and support for the J65Fl-1012020A are comprehensive. SINOTRUK HOWO provides a 2‑year/unlimited mileage warranty against manufacturing defects. Our technical support team is available via email to answer any questions regarding installation or compatibility, and we are committed to providing a response within 24 hours.
When ordering, always verify your engine model. The J65Fl-1012020A is designed for specific Howo engines; our cross‑reference guide (available on request) helps you select the correct filter.
In summary, the J65Fl-1012020A Oil Filter is a vital component for ensuring the long‑term health and performance of your SINOTRUK HOWO truck’s engine. Its precision construction, durable materials, and rigorous testing make it the preferred choice for oil filtration. Trust the genuine J65Fl-1012020A – it keeps your engine’s oil clean.
Change the oil filter at every oil change. Always use a genuine filter. Lubricate the gasket before installation. Hand‑tighten only. Check for leaks after starting the engine.
Generic aftermarket filters often have poor media, weak anti‑drain valves, or incorrect bypass valve settings, leading to poor filtration and engine wear. The genuine J65Fl-1012020A is engineered to exact specifications, ensuring a perfect fit and reliable performance.
Generic aftermarket oil filters often use inferior filter media, weak anti‑drain back valves, and incorrect bypass valve settings, leading to poor filtration, oil starvation at startup, and accelerated engine wear. The genuine SINOTRUK HOWO J65Fl-1012020A Oil Filter is engineered to the exact specifications of your engine’s lubrication system. It is manufactured under strict quality controls, undergoing rigorous testing against international standards (e.g., ISO, CE) and Sinotruk’s original specs. Using premium, high‑efficiency media ensures it removes harmful contaminants, delivering consistent performance and long life.
By choosing the authentic part, you protect your investment and ensure your engine stays clean and well‑lubricated for years to come. For fleet managers and owner‑operators who demand the best, the genuine J65Fl-1012020A is the only responsible choice.
J65Fl-1012020A – 100% Genuine SINOTRUK HOWO Oil Filter • The guardian of your engine’s cleanliness • No forms, just quality parts.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
