- ADDRESS：Wanda Plaza, Jinan, Shandong, China
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The relentless assault of road debris, water, and grime on your truck’s bodywork and undercarriage is a constant battle. Installing high-quality mudguards is one of the most effective and cost-efficient ways to win this fight and protect your vehicle. For FAW truck owners seeking durable and precise protection, turning to genuine parts is the only choice. Investing in authentic Faw truck parts guarantees performance and longevity.
The FAW Left And Right Mudguards set is the factory-designed solution, engineered to provide comprehensive coverage for both front wheels. This complete pair of mudguards, or fender flares, is built to deflect stones, reduce spray, and minimize the accumulation of corrosive road salts, making the Left And Right Mudguards a critical investment for preserving your truck’s condition and appearance.
Mudguards
Брызговики
Guardafangos
The fundamental purpose of the Left And Right Mudguards is to act as a physical barrier between your truck’s tires and its body. As tires rotate, they kick up a mixture of stones, gravel, mud, and water. Without proper mudguards, this material is thrown against the wheel arches, door panels, and lower body, leading to chipped paint, surface rust, and accelerated corrosion. More importantly, spray from wet roads can severely reduce visibility for following vehicles, creating a safety hazard.
The FAW mudguards are strategically shaped to catch and deflect this debris downward, significantly reducing the amount of material that reaches the body and minimizing the rooster tail of spray behind your truck, contributing to safer driving conditions for everyone.
Built to withstand the punishment of daily truck operation, the FAW Left And Right Mudguards are typically manufactured from high-density polyethylene (HDPE), heavy-duty rubber, or reinforced fiberglass. These materials offer an ideal balance of toughness, flexibility, and resistance to environmental stress. HDPE and fiberglass are highly resistant to impact from stones, will not rust or corrode, and can endure constant flexing without cracking. Rubber mudguards offer excellent abrasion resistance and flexibility. The chosen material ensures the mudguards can handle temperature extremes, from freezing cold that makes other plastics brittle to the heat of direct engine exposure, without degrading or losing their shape.
A key advantage of the genuine FAW Left And Right Mudguards is their vehicle-specific design. Each guard is molded to perfectly follow the contours of your FAW truck’s fender and wheel arch. This precise fit ensures maximum coverage without awkward gaps that allow spray to pass through. Mounting points align exactly with pre-existing holes or brackets on the vehicle’s frame or inner fender liner, making installation a straightforward bolt-on procedure. This eliminates the need for drilling, cutting, or improvisation required with universal mud flaps. A proper fit also ensures the mudguard maintains a consistent and safe distance from the tire during suspension travel and steering, preventing any contact that could cause damage or noise.
Installing the FAW Left And Right Mudguards delivers immediate and long-term value. **Bodywork Preservation:** They are the first line of defense against stone chips and scratches on the lower doors and fenders, maintaining resale value and reducing repaint costs. **Corrosion Prevention:** By blocking road salt, calcium chloride, and mud, they significantly slow down the rust process on vulnerable underbody components and body seams. **Improved Cleanliness:** The truck stays cleaner for longer, reducing the frequency and effort required for washing. **Enhanced Safety:** Reduced spray improves visibility for drivers behind you, especially in wet conditions, decreasing the risk of accidents. **Regulatory Compliance:** In many regions, functional mudguards are a legal requirement for commercial vehicles to prevent hazardous road spray.
Mudguards endure constant abuse and will eventually require replacement. Key indicators include: **Visible Cracks or Breaks:** Especially around mounting holes or along stress lines, which compromise structural integrity. **Severe Fading or Brittleness:** UV degradation can cause plastic to become weak and discolored. **Deformation or Warping:** The guard may no longer maintain its proper shape, reducing effectiveness. **Excessive Wear on the Lower Edge:** The area that takes the most impact from debris may become thin or shredded. **Missing or Corroded Mounting Hardware:** Rusted bolts or broken clips can cause the guard to hang loosely or detach. If you notice increased stone chips on your doors or more spray than usual, it’s time to inspect your Left And Right Mudguards.
Replacing your mudguards with the FAW OEM set is a manageable task. Park on a level surface and securely chock the wheels. For the front Left And Right Mudguards, you will typically access the mounting points by turning the front wheels to gain clearance. Using the correct socket or wrench, remove the bolts securing the old mudguard. Clean the mounting surface on the fender liner or bracket of any dirt or rust.
Position the new FAW mudguard, aligning all holes perfectly. Insert the new mounting hardware (bolts and washers are often included). Tighten the bolts firmly in a criss-cross pattern to ensure even pressure and prevent distortion. Do not overtighten, as this can crack the mounting tabs. Once installed, check clearance at full left and right lock steering.
To get the most from your FAW Left And Right Mudguards, incorporate simple care into your routine. **Regular Cleaning:** Wash the mudguards with car shampoo when washing the truck. This removes road salt, brake dust, and grime that can degrade the material over time. **Inspect Mounting Hardware:** Every few months, or after driving on particularly rough roads, check that all bolts are tight. Vibration can loosen them.
**Check for Damage:** During pre-trip inspections, quickly look for new cracks, tears, or signs that the guard is coming loose. **Apply Protective Dressing (Optional):** For rubber or plastic mudguards, a UV-protectant spray can be applied occasionally to help prevent fading and drying out, keeping them looking new and supple.
Choosing the genuine FAW Left And Right Mudguards over universal aftermarket options provides significant benefits. **Perfect, Hassle-Free Fit:** Designed for your exact truck model, they install quickly without modification and look like a factory part. **Optimal Coverage:** Their shape is aerodynamically and practically designed to provide maximum protection based on the specific tire and fender geometry of your FAW truck.
**Proven Durability:** Manufactured to FAW’s material and quality standards, they are tested to withstand the operational demands of your vehicle. **Preserved Vehicle Integrity:** Using the correct mounting points with the right hardware avoids stress cracks or damage to the fender liner. For a component that plays such a vital protective role, the genuine part ensures reliability, performance, and a professional finish.
Final Summary: The FAW Left And Right Mudguards are a vital, functional accessory for any truck owner concerned with preservation and safety. This genuine OEM pair offers durable, precisely fitted protection that effectively shields your vehicle’s body from costly damage caused by rocks, debris, and road spray.
Easy to install and maintain, they provide long-term value by helping to maintain your truck’s appearance, structural integrity, and resale value. Choosing this factory-engineered set over universal alternatives guarantees optimal performance, a perfect fit, and reliable defense against the elements mile after mile.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
