- ADDRESS：Wanda Plaza, Jinan, Shandong, China
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
Ensure precise wheel alignment and optimal tire wear on your FAW truck with the genuine Adjuster Arm, OEM part number 3502205CA2T-C00/C. This critical suspension component connects the steering knuckle to the chassis, allowing for the accurate adjustment of camber and caster angles. As an essential part of reliable and durable Faw truck parts, the 3502205CA2T-C00/C plays a vital role in maintaining vehicle stability, handling, and safety.
Over time, these arms can wear out or become damaged, leading to poor alignment that causes uneven tire wear, reduced fuel efficiency, and compromised steering response. Replacing a worn adjuster arm with the genuine 3502205CA2T-C00/C restores the suspension’s geometry, ensures accurate alignment adjustments, and protects your investment in tires. This heavy-duty, direct-fit component is engineered for longevity and precise performance under the demanding loads of commercial trucking.
Adjuster Arm
Регулировочный рычаг
Brazo de Ajuste
The Adjuster Arm 3502205CA2T-C00/C is a fundamental part of the front suspension alignment system. It serves as a crucial link between the fixed chassis mounting point and the steering knuckle. The unique design of this arm incorporates an adjustable threaded section or eccentric cam.
This feature allows technicians to make fine-tuned changes to the wheel’s camber (vertical tilt) and caster (forward or backward tilt) angles. Proper adjustment with the 3502205CA2T-C00/C ensures the wheels are perpendicular to the road and aligned correctly for optimal tire contact, steering returnability, and vehicle stability.
A faulty or worn 3502205CA2T-C00/C adjuster arm cannot hold the precise alignment settings. This leads to rapid and uneven tire wear, such as feathering or cupping, which can prematurely destroy expensive truck tires. It also causes the vehicle to pull to one side, requiring constant steering correction from the driver.
This increases driver fatigue and reduces overall safety. By maintaining correct alignment, the genuine 3502205CA2T-C00/C arm ensures even tire pressure distribution across the tread, maximizing tire life, improving fuel economy through reduced rolling resistance, and providing predictable, stable handling.
| Parameter | Specification |
|---|---|
| OEM Part Number | 3502205CA2T-C00/C |
| Component Name | Front Suspension Adjuster Arm / Camber Arm |
| Application | FAW Truck Front Axle Alignment |
| Primary Material | Forged or Cast Steel |
| Mounting Points | Chassis Bracket and Steering Knuckle |
| Adjustment Type | Threaded Sleeve or Eccentric Cam Bolt |
The genuine 3502205CA2T-C00/C Adjuster Arm is manufactured from high-strength forged or cast steel. This process creates a component with a dense, uniform grain structure that offers superior tensile strength and resistance to bending or fatigue under extreme loads and stress.
The pivot points are fitted with precision bushings or bearings to allow smooth articulation while minimizing free play. The adjustment mechanism is made from hardened steel threads or a durable eccentric cam to withstand repeated adjustments without stripping or deforming, ensuring long-term reliability.
Replacing the 3502205CA2T-C00/C requires lifting the front of the truck and supporting it securely. The wheel and sometimes the brake caliper are removed for access. The old arm is unbolted from the steering knuckle and chassis bracket.
The new OEM 3502205CA2T-C00/C arm is installed with new fasteners torqued to specification. A professional wheel alignment must follow, where a technician uses the arm’s adjustment feature to set the camber and caster to factory-recommended angles, locking the settings in place.
The primary economic benefit of a functional 3502205CA2T-C00/C is extended tire life. Proper alignment prevents irregular wear patterns, allowing tires to wear evenly across the entire tread surface. This can double or triple the lifespan of a set of expensive commercial truck tires.
Even wear also maintains optimal tire performance in wet and dry conditions, ensuring consistent traction and braking. This protection of your tire investment far outweighs the cost of the 3502205CA2T-C00/C adjuster arm itself.
Correct alignment, enabled by the 3502205CA2T-C00/C, ensures the vehicle tracks straight and true. It improves steering response and return-to-center feel, reducing the effort required by the driver, especially when heavily loaded.
Proper caster adjustment, in particular, increases high-speed stability and makes the truck less susceptible to crosswinds and road crown effects. This leads to a safer, more controlled, and less fatiguing driving experience.
Visible signs include abnormal tire wear on the inner or outer edges of the front tires. The vehicle pulling persistently to one side, even on a flat road, is a key indicator. A loose or vague steering feel, or excessive play in the wheel, can point to worn arm bushings.
Visible damage like bends, cracks, or severe rust on the arm itself mandates immediate replacement. If the adjustment mechanism is seized or stripped, preventing proper alignment, the entire 3502205CA2T-C00/C arm must be replaced.
The 3502205CA2T-C00/C is engineered for specific FAW truck models with particular front suspension designs. Its length, bushing type, and mounting hole geometry are precisely calculated to work within the suspension’s intended range of motion and alignment specifications.
Using a non-specific or aftermarket arm can result in incorrect geometry, limiting adjustment range or causing binding. The genuine 3502205CA2T-C00/C guarantees the correct fit and restores the suspension to its original performance parameters.
Misaligned wheels create increased rolling resistance as the tires scrub against the road surface instead of rolling freely. This forces the engine to work harder, burning more fuel. The 3502205CA2T-C00/C arm, by enabling precise alignment, minimizes this resistance.
For a fleet, even a small percentage improvement in fuel mileage per truck adds up to substantial annual savings. Maintaining proper alignment with components like the 3502205CA2T-C00/C is a key part of an overall fuel efficiency strategy.
Regular visual inspections are crucial. Check the 3502205CA2T-C00/C arm for signs of physical damage, such as cracks near welds or mounting points. Look for severe corrosion that could weaken the metal. Inspect the bushings for tears, dry rot, or excessive play.
A professional wheel alignment check should be performed at least annually, or more frequently if the truck operates on rough roads or after hitting a significant pothole or curb. This check will reveal if the adjuster arm is holding its settings correctly.
The genuine 3502205CA2T-C00/C is produced to FAW’s strict quality control standards, using the correct grade of steel and precise manufacturing tolerances. It ensures the arm has the exact strength, dimensions, and adjustment range required for your specific truck model.
Aftermarket arms may use inferior metals or heat treatment, leading to premature bending or failure. Their bushings may wear out quickly, and their adjustment mechanisms may lack precision. The OEM part provides peace of mind and long-term value.
A compromised adjuster arm directly affects vehicle safety. It can cause unpredictable handling, especially during emergency maneuvers or on wet roads. Worn bushings can introduce dangerous looseness in the front suspension, degrading steering response.
By ensuring the suspension geometry is correct and stable, the 3502205CA2T-C00/C arm helps maintain the vehicle’s designed safety characteristics. It is a critical component for ensuring the truck responds predictably to driver inputs under all conditions.
The 3502205CA2T-C00/C Adjuster Arm does not work in isolation. It is part of a complex system including control arms, tie rods, ball joints, and springs. All these components must be in good condition for the alignment to be accurate and lasting.
When replacing the adjuster arm, it is wise to inspect all related suspension and steering components. Worn ball joints or control arm bushings will compromise any new alignment, making the investment in a new 3502205CA2T-C00/C less effective.
The cost of a new 3502205CA2T-C00/C Adjuster Arm and its installation is minor compared to the expense of replacing prematurely worn tires. A single set of truck tires can cost many times more than this suspension component.
Furthermore, the improved fuel efficiency and enhanced safety it provides offer additional financial and operational benefits. Proactively replacing a worn arm is a smart investment that protects much larger expenses and contributes to vehicle uptime.
The FAW Adjuster Arm, OEM part number 3502205CA2T-C00/C, is a vital yet often overlooked component. It is the key to maintaining precise front-end alignment, which directly influences tire life, fuel consumption, handling, and safety.
Its robust construction is designed for the demanding life of a commercial truck. Choosing the genuine FAW part ensures perfect fitment and reliable performance. Regular inspection and timely replacement of the 3502205CA2T-C00/C are essential practices for cost-effective and safe truck operation.
Investing in this critical suspension component protects your investment in tires, improves your vehicle’s efficiency, and ensures your FAW truck delivers the stable, predictable performance required for professional transport duties.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
