FAW Fender、Upper Mudguard And 2、3 Pedal Logic Assembly

Left Rear Fender Assembly Assembly & Right Rear Fender Assembly Assembly: These are the complete, pre-assembled units for protecting the rear wheel arches. Each includes the core panel and its mounting hardware.

Left Rear Fender & Right Rear Fender: The primary durable panels (steel or composite) forming the main rear wheel arch protection, guarding against debris and spray.

Rear Fender Fixed Card Insert & Rear Fender Fixed Card Assembly: Components providing reinforced mounting points or alignment aids within the fender structure for secure attachment to the chassis or brackets.

Right Rear Fender Fixed support Assembly: A dedicated structural bracket providing additional mounting stability and load transfer for the Right Rear Fender.

Hexagon Socket Cap Head Screw: Used for attaching fender panels, fixed cards, and support assemblies. The socket cap head offers a low-profile, clean finish, often used where clearance is tight.

Left Front Fender & Right Front Fender: Core panels providing front wheel arch protection.

Upper Mudguard: A key component typically mounted above the tires, often behind the cab or on the chassis, working in conjunction with the wheel fenders for superior spray and debris control.

Right Front Wheel Upper Mudguard: A specific panel or extension of the upper mudguard system focused on the right front wheel area.

Upper Mudguard Small Door: An access panel within the Upper Mudguard structure, allowing for inspection or servicing of components behind it (e.g., air lines, wiring).

Front Fender Lower Support Bracket Assy: Provides critical lower mounting and structural support for the Left Front Fender and Right Front Fender, anchoring them securely to the chassis.

2 Pedal: The clutch pedal assembly, enabling gear shifting in manual transmission FAW trucks.

3 Pedal: The brake pedal assembly, the primary control for vehicle deceleration and stopping. Both pedals are logically positioned and mounted within this assembly framework for ergonomic driver access.

Assembling Bolt: General term for bolts used to attach fenders, mudguards, support brackets, and pedal components. Provides essential clamping force.

Hexagon Flange Lock Nut: Used with assembling bolts where maximum vibration resistance is crucial. The flange distributes load, and the lock feature (nylon insert/deformed threads) prevents loosening.

Large Washer: Essential for distributing clamping load under bolt heads and nuts, protecting fender/mudguard materials and bracket surfaces from damage, ensuring joint integrity.

Multi-thread Wide Series “U”-Nut: A specialized nut (often a U-shaped clip or weld nut) designed for easy installation into sheet metal brackets or chassis rails. Its wide series and multi-thread design provide a strong, reliable threaded anchor point for assembling bolts, commonly used in fender and mudguard mounting.

Heavy Hexagon: Refers to a Heavy Hex Nut. This type of nut has a larger width across the flats compared to a standard hex nut, providing greater bearing surface and higher strength, used for critical high-load connections within the assembly.