WG9100680069 Bolt
Premium Durable Sinotruk Howo Truck Parts | WG9100680069 Heavy-Duty Chassis Bolt
2026-10-18
YZ952516000001 Clutch Assembly
Premium Durable Sinotruk Howo Truck Parts | YZ952516000001 Heavy-Duty Clutch Assembly
2026-10-12

Premium Durable Sinotruk Howo Truck Parts | 190003989315 Heavy-Duty Turbocharger Pipe Clamp

PART NO.:
190003989315
Part Name:
Turbocharger Pipe Clamp
Russian Name:
Зажим трубы турбокомпрессора

The 190003989315 Turbocharger Pipe Clamp is a premium, heavy-duty chassis charge-air piping fastener engineered specifically for SINOTRUK Howo and Sitrak trucks, providing secure, vibration-resistant clamping at the turbocharger outlet pipe, intercooler hose and intake manifold joints. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM-grade pipe clamp as a direct replacement for the original factory unit. The 190003989315 clamp ensures correct bore size, even clamping force and dependable sealing on Howo T7H, T5G, C7H and Sitrak C7H/T5G models powered by MC11 and MC13 engines.

Manufactured from high-strength stainless steel with a precision-formed band, a reinforced locking bolt and a corrosion-resistant finish, this turbocharger pipe clamp is built to exact OEM specifications. Its robust construction maintains constant clamping pressure on the hose or pipe joint, resists vibration, heat, boost pressure cycling, road salt and temperature extremes, and performs reliably in constant commercial truck service.

OEM 190003989315 • Turbocharger pipe clamp • Stainless steel band • Direct OEM fit

190003989315 Turbocharger Pipe Clamp
Turbocharger Pipe Clamp (EN)
190003989315 Turbocharger Pipe Clamp
Хомут турбинного патрубка (RU)
190003989315 Turbocharger Pipe Clamp
Abrazadera del tubo del turbocompresor (ES)

Product Overview – 190003989315 Turbocharger Pipe Clamp

The 190003989315 Turbocharger Pipe Clamp is a critical fastening component in the charge-air system of SINOTRUK Howo and Sitrak trucks with MC11 and MC13 engines. It secures the turbocharger outlet pipe to the intercooler hose and the intercooler outlet to the intake manifold, keeping the pressurised air path sealed under boost.

This clamp is widely used on Howo T7H, T5G, C7H and Sitrak C7H/T5G models. Its stainless steel band and reinforced locking mechanism maintain even clamping force around the hose or pipe, preventing boost leaks that cause power loss, black smoke and increased fuel consumption.

Common signs that a turbocharger pipe clamp needs replacement include a whistling or hissing noise under acceleration, visible boost leaks at the hose joint, oil mist around the pipe connection, a loose or corroded clamp band, stripped threads on the locking bolt and a clamp that will not hold pressure.

Fitting a new 190003989315 Turbocharger Pipe Clamp restores a tight, leak-free boost path, stable turbo pressure and reliable engine performance. It is a small, low-cost repair that protects the turbocharger, intercooler and engine from boost leak-related damage.

Technical Specifications – 190003989315 Turbocharger Pipe Clamp

Parameter Specification
OEM Number 190003989315
Product Name Turbocharger Pipe Clamp
Brand SINOTRUK Howo / Sitrak
Component Type Chassis / Charge-Air Pipe Clamp
Weight Approx. 0.20 – 0.35 kg
Material High-strength stainless steel band with corrosion-resistant finish
Operating Voltage Not applicable (mechanical clamp)
Clamp Type T-bolt pipe clamp with reinforced locking nut
Bore Range OEM turbocharger outlet pipe diameter
Operating Temperature -40°C to +200°C
Protection Rating Heat, oil, boost pressure, salt and corrosion resistant
Compatible Models HOWO T7H, T5G, C7H, Sitrak C7H / T5G with MC11 / MC13 engine
Certification ISO 9001, OEM validated
All values verified for 190003989315 Turbocharger Pipe Clamp

Key Features of 190003989315 Turbocharger Pipe Clamp

OEM specification – exact replacement for Howo and Sitrak turbo pipe clamps.
Even clamping force – prevents boost leaks around the hose joint.
Stainless steel band – resists corrosion and high-temperature exposure.
Reinforced locking bolt – holds pressure under vibration and boost cycling.
Direct-fit design – matches the original turbocharger outlet pipe joint.
Heat resistant – rated from -40°C to +200°C.
Simple installation – basic hand tools are sufficient.
Cost-effective – restores boost performance without pipe replacement.

Compatibility & Applications – 190003989315 Turbocharger Pipe Clamp

This turbocharger pipe clamp is designed for SINOTRUK Howo and Sitrak trucks with MC11 and MC13 engines, with primary compatibility across the T7H, T5G, C7H and Sitrak C7H/T5G series. It is a direct OE replacement for the original charge-air pipe clamp and fits the factory turbocharger outlet, intercooler hose and intake manifold joints.

The clamp is essential in applications where a tight, leak-free charge-air path is critical, such as long-haul transport, construction, mining and municipal service. In these duties, it must resist boost pressure, heat, vibration, oil mist and road salt while maintaining constant clamping force.

When replacing the clamp, it is recommended to inspect the hose or pipe for cracks, oil contamination or deformation, and check the mating surfaces for corrosion or damage. This part is designed to work with the factory charge-air system for correct fit and reliable operation.

For fleets with multiple HOWO or Sitrak trucks, standardising on the 190003989315 Turbocharger Pipe Clamp simplifies charge-air system maintenance and ensures the correct clamp is available for scheduled service or emergency repairs.

Installation & Maintenance – 190003989315 Turbocharger Pipe Clamp

Replacing the 190003989315 Turbocharger Pipe Clamp is a straightforward procedure that requires basic hand tools. This work should be performed by a qualified technician with the engine cool and the charge-air system depressurised.

Loosen and remove the old clamp, then clean the hose and pipe surfaces. Inspect for cracks, oil contamination or deformation before fitting the new clamp. Position the new clamp over the hose or pipe joint, engage the locking bolt and tighten it to the OEM torque.

Check that the clamp is evenly seated around the full circumference of the joint. Run the engine and check for boost leaks, whistling or hissing noises. During routine service, inspect the clamp for corrosion or looseness and re-tighten or replace it if any fault is found.

Pro Tip: Always check that the hose or pipe is fully seated before tightening the new clamp. A partially seated joint will leak boost pressure even with a new clamp, causing power loss and black smoke.

Quality Assurance – 190003989315 Turbocharger Pipe Clamp

This turbocharger pipe clamp is manufactured in an ISO 9001-certified facility using high-strength stainless steel and a corrosion-resistant finish. Incoming steel is checked for thickness, tensile strength and surface quality before forming begins.

Each clamp is formed, assembled and inspected for band profile, locking bolt thread, bore diameter and overall finish. Every batch is dimensionally checked, and samples receive a load and vibration test before packing.

Batch samples undergo salt spray, thermal cycling and pressure cycling testing to confirm long-term reliability in heavy-duty truck use. These checks help ensure the clamp performs in the tough conditions Howo and Sitrak engines face every day.

This pipe clamp is covered by a 12-month warranty against material and workmanship defects. Strict quality control means every unit matches the fit, function and durability of the original factory part.

ISO 9001 OEM Validated Load Tested 12-Month Warranty

Why Choose 190003989315 Turbocharger Pipe Clamp for Your SINOTRUK Howo?

The 190003989315 Turbocharger Pipe Clamp is a small but vital component for maintaining a sealed, leak-free boost path and reliable engine performance on your Howo or Sitrak truck. A loose or corroded clamp can cause boost leaks, power loss, black smoke and increased fuel consumption.

Manufactured from quality stainless steel with a reinforced locking bolt and even clamping force, this pipe clamp offers dependable performance and long service life. Its exact OEM dimensions keep installation simple and work with the factory turbocharger outlet pipe.

Fleet operators benefit from reduced charge-air system downtime, lower maintenance costs and improved vehicle availability. Owner-operators gain confidence from a clamp that meets strict OEM standards and is backed by a 12-month warranty.

Order the 190003989315 Turbocharger Pipe Clamp today and keep your SINOTRUK Howo boost system sealed, efficient and reliable for years to come.

OEM 190003989315 SINOTRUK Howo Approved Premium Chassis Component
190003989315 Turbocharger Pipe Clamp – Premium SINOTRUK Howo Chassis Charge-Air System Component

Related Products

Customer Visit

2025-09-28

Kenya Truck Parts Collaboration: DERUNA Empowers Local Distributors to Deepen Presence in Chinese Heavy-Duty Truck Market

DERUNA strengthens its partnership with Kenyan distributors of Howo, Shacman, and FAW trucks. This visit confirmed the high quality of our Kenya Trucks Parts and paved the way for expanding the supply of reliable components to the Kenyan market.
2025-09-25

Strategic Expansion: Howo Parts Niger Partnership Strengthened by Client Visit to DERUNA

DERUNA hosted a client from Niger specializing in Howo Parts Niger. The visit, fueled by the client's positive experience, led to a new合作 plan with customized parts recommendations for the Niger market.
2025-09-25

Boost Your Fleet: Howo Parts Mozambique Success with DERUNA

A leading Mozambican parts intermediary visited DERUNA, expressing high satisfaction with HOWO and Shacman parts. We reviewed local sales data and planned future cooperation for optimal Howo Parts Mozambique supply.
2025-09-24

Strengthening the Partnership: DERUNA Hosts Krasnoyarsk’s Premier HOWO Parts Distributor

Strengthening the Partnership: DERUNA Welcomes the Distributor of Howo Parts Krasnoyarsk for a Strategic Review.
2025-09-23

Building the Future: DERUNA Welcomes Bangladeshi Road Construction Leader for Equipment Review and Strategic Planning

Building the Future: DERUNA Hosts XCMG Shantui Equipment Bangladesh Review with Strategic Partner.
2025-09-23

Strengthening Mining Operations: DERUNA Welcomes Mauritanian Mining Company for Strategic Partnership Review

Strengthening Mining Operations: DERUNA Welcomes Mauritanian Mining Company to Review HOWO Dump Truck and XCMG Excavator Partnership.
Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
Connecting...
Please leave your inquiry and your phone. We will give you feedback within 12 hours.
Our operators are busy. Please try again later
:
:
:
:
Have you got question? Write to us!
:
:
This chat session has ended