200V01804-0025 Oil-Water Separator
Premium Durable Sinotruk Howo Truck Parts | 200V01804-0025 Heavy-Duty Oil-Water Separator
2026-10-12
202V09402-0189 Turbocharger Intake Manifold
Premium Durable Sinotruk Howo Truck Parts | 202V09402-0189 Heavy-Duty Turbocharger Intake Manifold
2026-10-12

Premium Durable Sinotruk Howo Truck Parts | YZ952516000002 Heavy-Duty Clutch Driven Plate

PART NO.:
YZ952516000002
Part Name:
Clutch Driven Plate
Russian Name:
Ведомая пластина сцепления

The YZ952516000002 Clutch Driven Plate is a premium, heavy-duty chassis clutch component engineered specifically for SINOTRUK Howo trucks, providing the friction interface that transmits engine torque to the gearbox input shaft while enabling smooth engagement and disengagement. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM-grade 430 mm pull-type clutch disc as a direct replacement for the original factory unit. The YZ952516000002 driven plate ensures correct spline fit, stable friction performance and dependable operation on Howo A7, T7H, HOWO 336, HOWO 371 and Sitrak C7H models.

Manufactured with a ceramic-metallic friction facing, a riveted steel carrier, a multi-coil torsion damper and a precision-broached splined hub, this clutch driven plate is built to exact OEM dimensions. Its robust construction absorbs driveline shock, resists heat, vibration, oil contamination and temperature extremes, and performs reliably in constant commercial haulage, construction and long-distance transport.

OEM YZ952516000002 • 430 mm pull-type driven plate • 3350 Nm torque rating • Direct OEM fit

YZ952516000002 Clutch Driven Plate
Clutch Driven Plate (EN)
YZ952516000002 Clutch Driven Plate
Ведомый диск сцепления (RU)
YZ952516000002 Clutch Driven Plate
Disco conducido de embrague (ES)

Product Overview – YZ952516000002 Clutch Driven Plate

The YZ952516000002 Clutch Driven Plate is the friction disc at the centre of the 430 mm pull-type clutch system on SINOTRUK Howo heavy trucks. It sits between the flywheel and the pressure plate, transmitting engine torque through its splined hub to the gearbox input shaft while its torsion damper absorbs the shock of each gear change.

This driven plate is rated for a torque capacity of 3350 Nm (KM-X specification) and is designed for the high-horsepower Howo configurations. It is cross-referenced with WG9525160018, WG9921161100 and AZ9725160390, making it a versatile replacement for a wide range of Howo and Sitrak applications.

Common signs that a clutch driven plate needs replacement include clutch slip under acceleration, shudder or judder during engagement, difficulty selecting gears, a burning smell after hill starts, and visible cracks, glazing or oil contamination on the friction facing.

Fitting a new YZ952516000002 Clutch Driven Plate restores correct torque transfer, smooth clutch engagement and reliable gear shifting. It is a durable repair that protects the flywheel, pressure plate, release bearing and gearbox from shock loading and heat damage.

Technical Specifications – YZ952516000002 Clutch Driven Plate

Parameter Specification
OEM Number YZ952516000002
Product Name Clutch Driven Plate (430 Pull-Type, Torque 3350/KM-X)
Brand SINOTRUK Howo
Component Type Chassis / Clutch Driven Plate
Weight Approx. 9.0 kg
Friction Material Ceramic-metallic compound, riveted facing
Operating Voltage Not applicable (mechanical clutch component)
Disc Diameter 430 mm
Spline / Bore 10 splines / 52.4 mm
Torque Capacity 3350 Nm (KM-X)
Cross-Reference WG9525160018 / WG9921161100 / AZ9725160390
Compatible Models HOWO A7, T7H, HOWO 336, HOWO 371, Sitrak C7H and related heavy-duty trucks
Certification ISO 9001, OEM validated
All values verified for YZ952516000002 Clutch Driven Plate

Key Features of YZ952516000002 Clutch Driven Plate

OEM specification – exact 430 mm replacement for Howo clutch discs.
3350 Nm torque rating – suits high-horsepower Howo and Sitrak engines.
Ceramic-metallic facing – stable friction and high heat resistance.
Multi-coil torsion damper – absorbs driveline shock and reduces judder.
Precision-splined hub – exact 10-spline / 52.4 mm fit on the input shaft.
Wide cross-reference – interchangeable with WG9525160018, WG9921161100 and AZ9725160390.
Simple installation – fits the original flywheel and pressure plate.
Cost-effective – restores clutch performance without gearbox work.

Compatibility & Applications – YZ952516000002 Clutch Driven Plate

This clutch driven plate is designed for SINOTRUK Howo trucks, with primary compatibility across the A7, T7H, HOWO 336, HOWO 371 and Sitrak C7H series. It is a direct OE replacement for the original 430 mm pull-type clutch disc and works with the factory flywheel and pressure plate.

The disc is essential in applications where reliable torque transfer and smooth clutch control are critical, such as long-haul freight, dump truck operation, concrete mixing and construction haulage. In these duties, it must resist heat, vibration, dust, oil contamination and frequent clutch engagement.

When replacing the driven plate, it is recommended to inspect the flywheel friction surface, pressure plate, release bearing and input shaft splines for wear or damage. This part is designed to work with the factory clutch assembly for correct fit and reliable operation.

For fleets with multiple HOWO or Sitrak trucks, standardising on the YZ952516000002 Clutch Driven Plate simplifies clutch maintenance and ensures the correct part is available for scheduled service or emergency repairs.

Installation & Maintenance – YZ952516000002 Clutch Driven Plate

Replacing the YZ952516000002 Clutch Driven Plate is a job for a qualified technician using a transmission jack and clutch alignment tool. Remove the gearbox, unbolt the pressure plate in a cross pattern and withdraw the old disc from the flywheel.

Clean the flywheel friction surface and inspect for scoring, cracks or heat discoloration. Clean the input shaft splines and apply a thin film of high-molybdenum grease. Check the release bearing and pilot bearing for smooth operation.

Fit the new disc with the damper hub facing the gearbox and the pull-type facing toward the pressure plate. Use an alignment tool to centre the disc, then install the pressure plate and tighten the bolts in a star pattern to the OEM torque.

Refit the gearbox and road test through all gears. During routine service, check for clutch slip, judder or noise and replace the disc whenever the friction facing approaches the wear limit.

Pro Tip: Never hammer the disc hub to rotate it after installation, as this damages the torsion damper. Always use a clutch alignment tool and verify that the pull-type facing is oriented correctly before tightening the pressure plate.

Quality Assurance – YZ952516000002 Clutch Driven Plate

This driven plate is manufactured in an ISO 9001-certified facility using ceramic-metallic friction compound, a riveted steel carrier and a precision-broached splined hub. Incoming friction material is checked for coefficient stability, heat resistance and bond strength.

Each disc is assembled and balanced on precision lines, then inspected for facing thickness, rivet height, spline fit, damper spring tension and overall runout. Every batch is dimensionally checked, and samples receive a torque and burst test before packing.

Batch samples undergo thermal cycling, friction fade and wear testing to confirm long-term reliability in heavy-duty truck use. These checks help ensure the driven plate performs in the tough conditions Howo clutches face every day.

This driven plate is covered by a 12-month warranty against material and workmanship defects. Strict quality control means every unit matches the fit, function and durability of the original factory part.

ISO 9001 OEM Validated Torque Tested 12-Month Warranty

Why Choose YZ952516000002 Clutch Driven Plate for Your SINOTRUK Howo?

The YZ952516000002 Clutch Driven Plate is a vital component for maintaining reliable torque transfer, smooth gear changes and driveline protection on your Howo or Sitrak truck. A worn or contaminated disc causes clutch slip, judder, difficult shifting and potential damage to the flywheel and pressure plate.

Manufactured from quality ceramic-metallic friction material with a multi-coil damper and a precision-splined hub, this 430 mm pull-type disc offers dependable performance and long service life. Its exact OEM dimensions and wide cross-reference coverage keep installation simple and sourcing easy.

Fleet operators benefit from reduced clutch repair downtime, lower maintenance costs and improved vehicle availability. Owner-operators gain confidence from a driven plate that meets strict OEM standards and is backed by a 12-month warranty.

Order the YZ952516000002 Clutch Driven Plate today and keep your SINOTRUK Howo driveline engaging smoothly, strongly and reliably for years to come.

OEM YZ952516000002 SINOTRUK Howo Approved Premium Chassis Component
YZ952516000002 Clutch Driven Plate – Premium SINOTRUK Howo Chassis Clutch Component

Related Products

Customer Visit

2025-09-28

Kenya Truck Parts Collaboration: DERUNA Empowers Local Distributors to Deepen Presence in Chinese Heavy-Duty Truck Market

DERUNA strengthens its partnership with Kenyan distributors of Howo, Shacman, and FAW trucks. This visit confirmed the high quality of our Kenya Trucks Parts and paved the way for expanding the supply of reliable components to the Kenyan market.
2025-09-25

Strategic Expansion: Howo Parts Niger Partnership Strengthened by Client Visit to DERUNA

DERUNA hosted a client from Niger specializing in Howo Parts Niger. The visit, fueled by the client's positive experience, led to a new合作 plan with customized parts recommendations for the Niger market.
2025-09-25

Boost Your Fleet: Howo Parts Mozambique Success with DERUNA

A leading Mozambican parts intermediary visited DERUNA, expressing high satisfaction with HOWO and Shacman parts. We reviewed local sales data and planned future cooperation for optimal Howo Parts Mozambique supply.
2025-09-24

Strengthening the Partnership: DERUNA Hosts Krasnoyarsk’s Premier HOWO Parts Distributor

Strengthening the Partnership: DERUNA Welcomes the Distributor of Howo Parts Krasnoyarsk for a Strategic Review.
2025-09-23

Building the Future: DERUNA Welcomes Bangladeshi Road Construction Leader for Equipment Review and Strategic Planning

Building the Future: DERUNA Hosts XCMG Shantui Equipment Bangladesh Review with Strategic Partner.
2025-09-23

Strengthening Mining Operations: DERUNA Welcomes Mauritanian Mining Company for Strategic Partnership Review

Strengthening Mining Operations: DERUNA Welcomes Mauritanian Mining Company to Review HOWO Dump Truck and XCMG Excavator Partnership.
Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
Connecting...
Please leave your inquiry and your phone. We will give you feedback within 12 hours.
Our operators are busy. Please try again later
:
:
:
:
Have you got question? Write to us!
:
:
This chat session has ended