- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The 712W25455-6015 High-Altitude Kit Auxiliary Wiring Harness is a premium, heavy-duty chassis electrical component engineered specifically for SINOTRUK Howo trucks, delivering reliable power and signal distribution for high-altitude engine management and auxiliary systems. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM-grade auxiliary harness as a direct replacement for the original factory unit. The 712W25455-6015 harness ensures correct pin mapping, stable communication with the engine ECU and dependable operation on Howo A7, T7H, HOWO 371 and HOWO 380 models operating in high-altitude regions.
Manufactured from high-strand copper conductors, flexible thermoplastic insulation and a reinforced PVC outer jacket, the 712W25455-6015 High-Altitude Kit Auxiliary Wiring Harness is built to exact OEM dimensions. Its robust construction resists vibration, abrasion, oil, water and temperature extremes, delivering dependable performance under the constant flexing and electrical loads of commercial truck operation.
OEM 712W25455-6015 • High-altitude kit • Sealed connectors • Vibration resistant • Direct OEM fit
The 712W25455-6015 High-Altitude Kit Auxiliary Wiring Harness is a critical electrical component in the chassis system of SINOTRUK Howo trucks operating in mountainous or high-elevation regions. It connects the high-altitude kit sensors, actuators and control module to the main chassis harness, ensuring correct engine tuning and emissions control at low atmospheric pressure.
This 712W25455-6015 harness is precision-manufactured to exact OEM dimensions. The copper conductors are stranded for flexibility, the insulation is formulated for extreme temperatures, and the molded connectors are sealed against dust and moisture. The harness includes all necessary terminals and protective sleeving for the high-altitude kit installation.
Common signs that a high-altitude kit auxiliary wiring harness needs replacement include power loss at altitude, excessive black smoke, engine warning lamps, fault codes for altitude compensation, blown fuses and corroded or bent pins. Fitting a new 712W25455-6015 harness restores correct high-altitude engine management and performance.
Whether you are repairing a faulty high-altitude circuit, replacing a damaged harness or carrying out preventive maintenance on a fleet of Howo trucks, the 712W25455-6015 High-Altitude Kit Auxiliary Wiring Harness delivers the quality, reliability and durability that SINOTRUK Howo professionals expect.
The 712W25455-6015 High-Altitude Kit Auxiliary Wiring Harness is designed for SINOTRUK Howo trucks, with primary compatibility across the A7, T7H, HOWO 371 and HOWO 380 series. It is a direct OE replacement, so it connects to the factory high-altitude kit sensors and control module without modification.
This harness is essential in applications where high-altitude engine performance and emissions compliance are critical, such as long-haul transport, construction and mining in mountainous regions. In these duties, the harness must deliver stable signals without interference and resist vibration, flexing, heat and contamination.
When replacing the high-altitude kit auxiliary harness, it is recommended to inspect the altitude sensors, control module, main chassis harness, fuses and relays for wear or damage. The 712W25455-6015 is designed to work with the factory engine management system, ensuring correct pin mapping and reliable operation.
For fleets with multiple HOWO trucks, standardising on the 712W25455-6015 High-Altitude Kit Auxiliary Wiring Harness simplifies electrical repair inventory and ensures the correct harness is available for scheduled maintenance or emergency repairs.
Replacing the 712W25455-6015 High-Altitude Kit Auxiliary Wiring Harness is a simple procedure that requires basic electrical knowledge and hand tools. This work should be performed by a qualified technician. Begin by disconnecting the battery negative terminal to prevent accidental short circuits.
Locate the auxiliary harness near the high-altitude kit module or chassis frame. Disconnect the old harness from the sensors and control module, taking note of the routing and any retaining clips. Withdraw the old harness and inspect the connectors for corrosion or damage.
Route the new 712W25455-6015 harness along the original path and secure it with the factory clips. Connect the plugs to the sensors and control module until they click into place. Reconnect the battery and clear any fault codes using a diagnostic tool. Test the high-altitude kit through its full operating range.
For ongoing maintenance, periodically check that the harness is securely routed away from sharp edges and heat sources, and that all connectors are clean and dry. If any high-altitude function becomes intermittent, inspect the affected sensor and fuse before replacing the harness again.
The 712W25455-6015 High-Altitude Kit Auxiliary Wiring Harness is manufactured in an ISO 9001-certified facility using high-quality copper conductors and automated crimping processes. Raw materials are sourced from certified suppliers and undergo incoming inspection for conductor resistance, insulation thickness and terminal plating.
Each harness is assembled on precision lines and then tested for continuity, insulation resistance and high-potential withstand. The terminals are pull-tested to ensure secure crimps, and the outer jacket is inspected for correct fit and finish. Every unit is subjected to a functional signal test before packing.
Random samples from each production batch undergo environmental testing, including thermal cycling, vibration, salt spray and fluid exposure, to validate long-term reliability in heavy-duty truck applications. These tests ensure the harness continues to perform in the harsh conditions experienced by SINOTRUK Howo vehicles.
We back the 712W25455-6015 with a comprehensive 12-month warranty against material and workmanship defects. Our rigorous quality control ensures that every high-altitude kit auxiliary wiring harness delivers the same fit, function and durability as the original factory component.
The 712W25455-6015 High-Altitude Kit Auxiliary Wiring Harness is a vital component for maintaining correct engine performance, emissions compliance and vehicle reliability on your Howo truck operating at high elevations. A faulty harness causes power loss, excessive smoke and engine faults, especially when climbing steep mountain roads.
Manufactured from high-quality copper with heat-resistant insulation and sealed connectors, the 712W25455-6015 offers outstanding reliability, corrosion resistance and long-term durability. Its direct-fit design ensures straightforward installation and immediate compatibility with the factory high-altitude kit.
Fleet operators benefit from reduced engine downtime, lower maintenance costs and improved vehicle performance in mountainous regions. Owner-operators gain peace of mind knowing their high-altitude kit is powered by a harness that meets strict OEM standards and is backed by a comprehensive warranty.
Order the 712W25455-6015 High-Altitude Kit Auxiliary Wiring Harness today and keep your SINOTRUK Howo performing reliably at altitude for years to come.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
