WG9925770004 Fuel Pump Chassis Wiring Harness
Premium WG9925770004 Fuel Pump Chassis Wiring Harness for SINOTRUK Howo | Heavy-Duty Chassis Electrical Component
2026-10-06
712W25455-6015 High-Altitude Kit Auxiliary Wiring Harness
Premium 712W25455-6015 High-Altitude Kit Auxiliary Wiring Harness for SINOTRUK Howo | Heavy-Duty Chassis Electrical Component
2026-10-06

Premium WG1034130181+008 Urea Filter HOWO T5G for SINOTRUK Howo | Heavy-Duty Chassis Emissions Component

PART NO.:
WG1034130181+008
Part Name:
Urea Filter HOWO T5G
Russian Name:
Фильтр мочевины HOWO T5G

The WG1034130181+008 Urea Filter HOWO T5G is a premium, heavy-duty chassis emissions component engineered specifically for SINOTRUK Howo trucks, delivering reliable filtration of the urea solution used in the selective catalytic reduction system. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM-grade urea filter as a direct replacement for the original factory unit. The WG1034130181+008 filter ensures clean reagent delivery, stable SCR performance and dependable operation on Howo T5G, A7, T7H and related heavy-duty models.

Manufactured from high-strength filter media, corrosion-resistant end caps and a sealed housing, the WG1034130181+008 Urea Filter HOWO T5G is built to exact OEM dimensions. Its robust construction maintains correct filtration efficiency, resists vibration, urea crystallization and temperature extremes, and provides dependable performance under the constant duty cycles of commercial truck operation.

OEM WG1034130181+008 • Urea filtration • Sealed housing • Vibration resistant • Direct OEM fit

WG1034130181+008 Urea Filter HOWO T5G
Urea Filter HOWO T5G (EN)
WG1034130181+008 Urea Filter HOWO T5G
Фильтр мочевины HOWO T5G (RU)
WG1034130181+008 Urea Filter HOWO T5G
Filtro de urea HOWO T5G (ES)

Product Overview – WG1034130181+008 Urea Filter HOWO T5G

The WG1034130181+008 Urea Filter HOWO T5G is a critical filtration component in the SCR emissions system of SINOTRUK Howo trucks. It removes impurities and particulates from the urea solution before it reaches the dosing module and injector, preventing clogging and ensuring correct reagent atomization.

This WG1034130181+008 filter is precision-manufactured to exact OEM dimensions. The filter media is selected for urea compatibility and fine particle retention, the end caps are sealed against bypass, and the housing is designed for a secure fit in the factory filter bracket. The unit is tested for correct flow rate and filtration efficiency.

Common signs that a urea filter needs replacement include SCR efficiency fault codes, urea crystallization at the injector, poor NOx conversion, reduced engine power, increased reagent consumption and visible contamination in the urea tank. Fitting a new WG1034130181+008 filter restores correct reagent flow and reliable emissions control.

Whether you are servicing a faulty SCR system, replacing a clogged filter or carrying out preventive maintenance on a fleet of Howo trucks, the WG1034130181+008 Urea Filter HOWO T5G delivers the quality, reliability and durability that SINOTRUK Howo professionals expect.

Technical Specifications – WG1034130181+008 Urea Filter HOWO T5G

Parameter Specification
OEM Number WG1034130181+008
Product Name Urea Filter HOWO T5G
Brand SINOTRUK Howo
Component Type Chassis / SCR Urea Filter
Weight Approx. 0.35 kg
Material High-strength filter media, corrosion-resistant end caps
Operating Voltage Not applicable (mechanical filter)
Filtration Rating OEM specified micron rating
Connection Type OEM quick-connect or threaded fittings
Operating Temperature -40°C to +85°C
Protection Rating Urea, dust and moisture resistant
Compatible Models HOWO T5G, A7, T7H, HOWO 371, HOWO 380 with SCR system
Certification ISO 9001, OEM validated
All values verified for WG1034130181+008 Urea Filter HOWO T5G

Key Features of WG1034130181+008 Urea Filter HOWO T5G

OEM specification – exact replacement for Howo urea filters.
High-efficiency media – removes fine particulates from urea.
Urea-compatible construction – resists crystallization and corrosion.
Sealed end caps – prevent bypass and ensure full filtration.
Vibration resistant – stable on rough roads and job sites.
Heat and cold resistant – rated from -40°C to +85°C.
Simple installation – fits original filter bracket and fittings.
Cost-effective – restores SCR performance without replacement of major parts.

Compatibility & Applications – WG1034130181+008 Urea Filter HOWO T5G

The WG1034130181+008 Urea Filter HOWO T5G is designed for SINOTRUK Howo trucks, with primary compatibility across the T5G, A7, T7H, HOWO 371 and HOWO 380 series equipped with SCR emissions systems. It is a direct OE replacement, so it fits the original filter bracket and connects to the factory urea lines without modification.

This filter is essential in applications where reliable emissions control and reagent cleanliness are critical, such as long-haul transport, construction, mining and municipal service. In these duties, the filter must maintain correct flow and filtration efficiency and resist vibration, urea exposure, heat and contamination.

When replacing the urea filter, it is recommended to inspect the urea tank, dosing module, injector, lines and filter housing for wear or contamination. The WG1034130181+008 is designed to work with the factory SCR system, ensuring correct filtration and reliable operation.

For fleets with multiple HOWO trucks, standardising on the WG1034130181+008 Urea Filter HOWO T5G simplifies emissions maintenance and ensures the correct filter is available for scheduled service or emergency repairs.

Installation & Maintenance – WG1034130181+008 Urea Filter HOWO T5G

Replacing the WG1034130181+008 Urea Filter HOWO T5G is a simple procedure that requires basic hand tools and care with urea lines. This work should be performed by a qualified technician. Begin by disconnecting the battery negative terminal and relieving pressure from the urea system.

Locate the urea filter in its bracket, usually near the urea tank or chassis frame. Disconnect the urea lines and remove the filter housing from the bracket. Withdraw the old filter element and inspect the housing and lines for crystallization or contamination.

Fit the new WG1034130181+008 filter element into the housing, ensuring correct orientation and seal seating. Refit the housing to the bracket and reconnect the urea lines. Reconnect the battery and clear any fault codes using a diagnostic tool. Test the SCR system through its full operating range.

For ongoing maintenance, replace the urea filter at the recommended service intervals, and periodically check the urea tank for contamination. If SCR efficiency faults recur, inspect the dosing module and injector before replacing the filter again.

Pro Tip: Before installing the WG1034130181+008 filter, check that the urea lines are clean and free from crystallization. Always disconnect the battery negative terminal first and clear fault codes after installation.

Quality Assurance – WG1034130181+008 Urea Filter HOWO T5G

The WG1034130181+008 Urea Filter HOWO T5G is manufactured in an ISO 9001-certified facility using high-strength filter media and corrosion-resistant materials. Raw materials are sourced from certified suppliers and undergo incoming inspection for filtration rating, flow characteristics and seal integrity.

Each filter is assembled on precision lines and then tested for filtration efficiency, flow rate and bypass seal. The housing is inspected for correct fit and finish, and the end caps are checked for secure bonding. Every unit is subjected to a functional flow test before packing.

Random samples from each production batch undergo environmental testing, including thermal cycling, vibration, urea immersion and humidity exposure, to validate long-term reliability in heavy-duty truck applications. These tests ensure the filter continues to perform in the harsh conditions experienced by SINOTRUK Howo vehicles.

We back the WG1034130181+008 with a comprehensive 12-month warranty against material and workmanship defects. Our rigorous quality control ensures that every urea filter delivers the same fit, function and durability as the original factory component.

ISO 9001 OEM Validated Flow Tested 12-Month Warranty

Why Choose WG1034130181+008 Urea Filter HOWO T5G for Your SINOTRUK Howo?

The WG1034130181+008 Urea Filter HOWO T5G is a vital component for maintaining reliable SCR operation, emissions compliance and engine performance on your Howo truck. A clogged or damaged filter causes urea crystallization, SCR efficiency faults and potential engine derate, especially in cold weather.

Manufactured from high-quality materials with a sealed housing and high-efficiency media, the WG1034130181+008 offers outstanding reliability, filtration performance and long-term durability. Its direct-fit design ensures straightforward installation and immediate compatibility with the factory SCR system.

Fleet operators benefit from reduced emissions downtime, lower maintenance costs and improved vehicle availability. Owner-operators gain peace of mind knowing their SCR system is protected by a filter that meets strict OEM standards and is backed by a comprehensive warranty.

Order the WG1034130181+008 Urea Filter HOWO T5G today and keep your SINOTRUK Howo emissions system clean and compliant for years to come.

OEM WG1034130181+008 SINOTRUK Howo Approved Premium Chassis Component
WG1034130181+008 Urea Filter HOWO T5G – Premium SINOTRUK Howo Chassis Emissions Component

Related Products

Customer Visit

2025-09-28

Kenya Truck Parts Collaboration: DERUNA Empowers Local Distributors to Deepen Presence in Chinese Heavy-Duty Truck Market

DERUNA strengthens its partnership with Kenyan distributors of Howo, Shacman, and FAW trucks. This visit confirmed the high quality of our Kenya Trucks Parts and paved the way for expanding the supply of reliable components to the Kenyan market.
2025-09-25

Strategic Expansion: Howo Parts Niger Partnership Strengthened by Client Visit to DERUNA

DERUNA hosted a client from Niger specializing in Howo Parts Niger. The visit, fueled by the client's positive experience, led to a new合作 plan with customized parts recommendations for the Niger market.
2025-09-25

Boost Your Fleet: Howo Parts Mozambique Success with DERUNA

A leading Mozambican parts intermediary visited DERUNA, expressing high satisfaction with HOWO and Shacman parts. We reviewed local sales data and planned future cooperation for optimal Howo Parts Mozambique supply.
2025-09-24

Strengthening the Partnership: DERUNA Hosts Krasnoyarsk’s Premier HOWO Parts Distributor

Strengthening the Partnership: DERUNA Welcomes the Distributor of Howo Parts Krasnoyarsk for a Strategic Review.
2025-09-23

Building the Future: DERUNA Welcomes Bangladeshi Road Construction Leader for Equipment Review and Strategic Planning

Building the Future: DERUNA Hosts XCMG Shantui Equipment Bangladesh Review with Strategic Partner.
2025-09-23

Strengthening Mining Operations: DERUNA Welcomes Mauritanian Mining Company for Strategic Partnership Review

Strengthening Mining Operations: DERUNA Welcomes Mauritanian Mining Company to Review HOWO Dump Truck and XCMG Excavator Partnership.
Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
Connecting...
Please leave your inquiry and your phone. We will give you feedback within 12 hours.
Our operators are busy. Please try again later
:
:
:
:
Have you got question? Write to us!
:
:
This chat session has ended