- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The VG192080017 King Pin Kit is a premium, heavy-duty chassis steering component engineered specifically for SINOTRUK Howo trucks, restoring precise wheel alignment and safe steering response on the front axle. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM-grade king pin kit as a direct replacement for the original factory assembly. The VG192080017 kit includes the king pin, bushings, bearings, seals, shims and retaining hardware needed to rebuild the front axle steering knuckle.
Manufactured from high-strength alloy steel with precision-ground surfaces and a corrosion-resistant finish, the VG192080017 King Pin Kit ensures smooth knuckle rotation, eliminates steering play and withstands the constant load, shock and vibration of heavy commercial operation. Its exact OEM dimensions guarantee a perfect fit with the factory axle beam, steering knuckle and brake components.
OEM VG192080017 • Complete rebuild kit • Precision ground • Corrosion resistant • Direct OEM fit
The VG192080017 King Pin Kit is a complete steering knuckle rebuild kit for the front axle of SINOTRUK Howo trucks. It includes the king pin, bronze or steel bushings, thrust bearings, oil seals, shims and retaining hardware required to restore proper steering geometry. The king pin allows the steering knuckle to pivot smoothly while supporting the vehicle’s front weight.
This VG192080017 kit is precision-manufactured to exact OEM dimensions. The king pin is ground to a mirror finish for smooth rotation, and the bushings are sized for the correct interference fit. The bearings and seals are selected for durability and resistance to water, dust and road salt. All components are matched to the factory axle for a perfect fit.
Common signs that a king pin kit needs replacement include excessive steering play, wandering or shimmy, uneven tyre wear, clunking noises over bumps, and visible wear or corrosion on the king pin or bushings. Fitting a new VG192080017 kit restores precise steering and front axle stability.
Whether you are rebuilding a front axle, repairing accident damage or carrying out preventive maintenance on a fleet of Howo trucks, the VG192080017 King Pin Kit delivers the quality, fit and durability that SINOTRUK Howo professionals expect.
The VG192080017 King Pin Kit is designed for SINOTRUK Howo trucks, with primary compatibility across the A7, T7H, HOWO 371 and HOWO 380 series that use the standard front axle steering knuckle. It is a direct OE replacement, so it fits the factory axle beam, knuckle and brake assembly without reaming or modification.
This kit is essential in applications where steering precision and safety are critical, such as long-haul transport, construction, mining and municipal service. In these duties, the king pin must withstand heavy vertical loads, braking forces and steering inputs while maintaining smooth, predictable movement.
When replacing the king pin kit, it is recommended to inspect the axle beam, steering knuckle, tie rod ends and wheel bearings for wear or damage. The VG192080017 is designed to work with the factory components, ensuring correct alignment and a secure installation. It is suitable for both standard and heavy-duty front axle configurations.
For fleets with multiple HOWO trucks, standardising on the VG192080017 simplifies steering repair inventory and ensures the correct kit is available for scheduled maintenance or emergency repairs.
Replacing the VG192080017 King Pin Kit is a complex procedure that requires mechanical expertise, specialised tools and a suitable workshop. This work should be performed by qualified technicians with experience in heavy-duty steering systems. Begin by safely raising the vehicle and supporting the front axle on stands.
Remove the wheels, brake calipers or drums, and steering linkage as required to access the steering knuckle. Remove the king pin retaining hardware and drive the old king pin out using a press or drift. Remove the old bushings and seals, then clean the knuckle bore and axle beam eyes thoroughly.
Press the new bushings into the knuckle and ream them to the correct clearance if required. Fit the new bearings, seals and shims from the VG192080017 kit, then insert the king pin and check for smooth rotation and correct preload. Install the retaining hardware and torque to specification.
Reassemble the brake and steering components, then lower the vehicle. Check steering alignment and test drive at low speed. For ongoing maintenance, grease the king pins at every service and inspect for play or leakage. Keeping the king pin kit in good condition ensures safe steering and long tyre life.
The VG192080017 King Pin Kit is manufactured in an ISO 9001-certified facility using advanced forging, machining, heat-treatment and assembly processes. Raw alloy steel is sourced from certified suppliers and tested for chemical composition, hardness and dimensional accuracy before production.
Each king pin is precision-ground to exact OEM tolerances, and the bushings are machined for correct fit and clearance. The bearings, seals and shims are inspected for material quality and dimensional conformity. Every kit is assembled and checked for completeness before packaging.
Random samples from each production batch undergo hardness testing, fatigue testing and salt-spray testing to validate long-term reliability under real-world steering loads. These tests ensure the VG192080017 continues to deliver precise steering and long service life.
We back the VG192080017 with a comprehensive 12-month warranty against material and workmanship defects. Our rigorous quality control ensures that every king pin kit delivers the same fit, strength and durability as the original factory assembly.
The VG192080017 King Pin Kit is a critical safety component for your Howo truck’s front axle. Worn king pins cause steering play, uneven tyre wear, shimmy and reduced control, especially under heavy loads. Replacing them with this genuine OEM-grade kit restores precise steering and front axle stability.
Manufactured from high-strength alloy steel with precision-ground surfaces and durable bushings, bearings and seals, the VG192080017 offers outstanding load capacity, wear resistance and long-term durability. Its exact OEM fit ensures straightforward installation and reliable performance.
Fleet operators benefit from reduced steering maintenance, longer tyre life and improved vehicle safety. Owner-operators gain peace of mind knowing their front axle is rebuilt with a kit that meets strict OEM standards and is backed by a comprehensive warranty.
Order the VG192080017 King Pin Kit today and keep your SINOTRUK Howo steering precise and safe for years to come.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
