- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The AZ1641240028-B Bumper Old Model 2009-2012 is a premium, heavy‑duty front bumper engineered specifically for SINOTRUK Howo trucks manufactured between 2009 and 2012, providing superior protection and a perfect fit for the vehicle’s front end. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM‑grade bumper as a direct replacement for the original factory component. The AZ1641240028-B bumper delivers exceptional impact resistance, structural rigidity, and corrosion protection, ensuring long‑term durability and maintaining the truck’s professional appearance even under the most demanding operating conditions.
Manufactured from high‑strength stamped steel with a multi‑stage corrosion‑resistant coating, the AZ1641240028-B bumper provides excellent dimensional stability and load‑bearing capacity. Its advanced design incorporates reinforcing ribs and precise mounting points that align perfectly with the factory chassis structure, ensuring seamless integration and reliable performance. This bumper is a critical component for protecting the front end from road debris, minor collisions, and environmental exposure.
OEM AZ1641240028-B • Old Model 2009‑2012 • High‑strength steel • Corrosion resistant • Direct OEM fit
The AZ1641240028-B is a premium front bumper designed specifically for SINOTRUK Howo trucks produced between 2009 and 2012, including the popular A7 and other heavy‑duty models of that era. This bumper is a critical component of the vehicle’s front end, providing protection for the engine compartment, radiator, and lighting assemblies, while also contributing to the truck’s aerodynamic efficiency and visual identity.
The AZ1641240028-B bumper is manufactured from high‑strength stamped steel, selected for its excellent structural properties and formability. The steel is precision‑formed using advanced stamping and welding processes to create a rigid, durable component that meets the exact specifications of the original factory part. Its multi‑stage corrosion‑resistant coating, including a zinc‑rich primer and a durable topcoat, provides outstanding protection against rust and environmental damage.
This bumper is engineered to withstand the extreme loads, vibrations, and impacts typical of heavy‑duty truck operation. Its robust construction and precise mounting points ensure a seamless fit with the factory chassis structure, maintaining the vehicle’s structural integrity and safety. Replacing a damaged or corroded bumper with the AZ1641240028-B restores the vehicle’s front‑end protection and appearance, preventing further deterioration.
Common signs that the bumper needs replacement include visible rust, dents, cracks, or deformation, as well as misalignment with the fenders, grille, or headlights. Replacing the bumper with the AZ1641240028-B addresses these issues, restoring the vehicle’s structural integrity and protecting the front end from environmental exposure. This OEM‑spec bumper is the ideal choice for collision repairs and preventive maintenance.
Whether you are performing a collision repair or addressing rust and corrosion, the AZ1641240028-B Bumper Old Model 2009-2012 delivers the quality, strength, and durability that SINOTRUK Howo professionals expect.
The AZ1641240028-B bumper is specifically designed for SINOTRUK Howo trucks manufactured between 2009 and 2012, with primary compatibility with the A7 series and other heavy‑duty models of that era. It is a direct OE replacement, ensuring a perfect fit with the existing mounting points, fenders, grille, and lighting assemblies without the need for modification or fabrication.
This bumper is essential for applications where the vehicle is subjected to heavy use, harsh environments, and potential impact damage, such as construction, mining, and long‑haul transport. In these conditions, the bumper is constantly exposed to vibration, moisture, road debris, and flying stones, which can lead to rust, dents, and structural fatigue. The AZ1641240028-B is engineered to provide long‑lasting protection and durability, ensuring the front end remains secure and the vehicle maintains its professional appearance.
When replacing the bumper, it is recommended to inspect the mounting brackets, fender liners, and surrounding body panels for signs of wear or damage. The AZ1641240028-B is designed to work with the factory components, ensuring proper alignment and a seamless repair. It is suitable for both collision repair and rust restoration projects.
For fleets with multiple HOWO trucks from the 2009‑2012 era, standardizing on the AZ1641240028-B simplifies body repair inventory and ensures the correct component is available for scheduled maintenance or emergency repairs. Always verify the vehicle model year and bumper configuration to confirm compatibility, though the AZ1641240028-B is the standard front bumper for the majority of A7 and related models from that period.
Replacing the AZ1641240028-B bumper is a moderately complex procedure that requires mechanical expertise, bodywork skills, and appropriate tools. This work should be performed by qualified technicians with experience in heavy‑duty truck body repair. Begin by safely raising the vehicle and supporting the front end as required, then remove any components obstructing access to the bumper mounting bolts.
Remove the old bumper by unfastening the mounting bolts from the chassis frame and disconnecting any fog lights, sensors, or wiring. Carefully lift the bumper off the vehicle and set it aside. Clean the mounting areas thoroughly and inspect the brackets for wear or damage. Replace any worn brackets or fasteners before installing the new bumper.
Position the new AZ1641240028-B bumper over the front chassis and align it with the mounting points. Loosely install the mounting bolts, then adjust the bumper position for proper alignment with the fenders, grille, and headlights. Tighten the bolts to the manufacturer’s specification and reconnect any electrical components.
After installation, check the bumper for proper alignment and secure fit. Verify that the hood opens and closes without interference and that all lights function correctly. For maintenance, periodically inspect the bumper for signs of rust, paint damage, or loose fasteners. Touch up any paint chips promptly to prevent corrosion, and keep the bumper clean to extend its service life.
The AZ1641240028-B bumper is manufactured in an ISO 9001‑certified facility using advanced stamping, welding, and coating processes. The steel is sourced from certified mills and undergoes chemical and mechanical testing to ensure it meets SPCC specifications for tensile strength, formability, and weldability.
Each bumper is precision‑formed using high‑tonnage stamping presses and assembled with robotic welding to ensure consistent quality and dimensional accuracy. Critical mounting points and contours are verified against a master gauge to guarantee a perfect fit. The multi‑stage coating process includes a zinc‑rich primer and a durable topcoat, providing excellent corrosion resistance (500+ hours salt spray tested).
Every bumper undergoes rigorous quality control checks, including dimensional verification, weld integrity inspection, and coating thickness measurement. Random samples from each production batch are subjected to structural load testing and corrosion testing to validate long‑term reliability under real‑world conditions.
We back the AZ1641240028-B with a comprehensive 12‑month warranty against material and workmanship defects. Our rigorous quality control ensures that every bumper delivers the same fit, performance, and durability as the original factory component, giving you confidence in your vehicle’s front‑end protection and appearance.
The AZ1641240028-B Bumper Old Model 2009-2012 is a vital body component for maintaining the safety, integrity, and appearance of your Howo truck. A rusted, bent, or damaged bumper can compromise the front‑end protection, leading to water intrusion, debris damage, and reduced vehicle value. By replacing it with this genuine OEM‑grade component, you restore the vehicle’s structural integrity and ensure the front end remains protected from the elements.
Manufactured from high‑strength stamped steel with a multi‑stage corrosion‑resistant coating, the AZ1641240028-B offers outstanding rigidity, impact resistance, and long‑term durability. Its precision‑formed design and exact mounting points ensure a seamless fit and easy installation, while its durable finish resists rust and environmental damage for years of reliable service.
Fleet operators will benefit from reduced body repair costs, improved vehicle safety, and better fleet appearance. Owner‑operators gain peace of mind knowing their truck’s front end is protected by a component that meets strict OEM standards and is backed by a comprehensive warranty.
Invest in the AZ1641240028-B and ensure your SINOTRUK Howo remains strong, safe, and professional for years to come.
Order your AZ1641240028-B today and restore your truck’s front-end protection.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
