- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The AZ9761451160 VGD95 711-50200-6880 Front Hub Assembly T5G is a premium, heavy‑duty wheel‑end component engineered specifically for the front axle of SINOTRUK Howo T5G trucks, providing reliable wheel mounting, smooth bearing rotation, and long‑term structural integrity under the most demanding loads. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM‑grade front hub assembly as a direct replacement for the original factory component. The AZ9761451160 VGD95 711-50200-6880 front hub delivers precise bearing fitment, excellent load capacity, and superior corrosion protection, ensuring safe and reliable vehicle operation even under the most severe hauling and construction conditions.
Manufactured from high‑strength cast steel with precision‑machined bearing bores and wheel stud surfaces, the AZ9761451160 VGD95 711-50200-6880 front hub assembly provides excellent dimensional stability and structural rigidity. Its advanced design incorporates reinforced flanges, optimized wall thickness, and a robust ABS sensor mounting provision, ensuring seamless integration with the factory front axle and braking system.
OEM AZ9761451160 VGD95 711-50200-6880 • Front hub assembly • Cast steel construction • Precision machined • Direct OEM fit
The AZ9761451160 VGD95 711-50200-6880 is a premium front hub assembly designed specifically for the front axle of SINOTRUK Howo T5G trucks, as well as other heavy‑duty chassis that share this wheel‑end configuration. This front hub is a critical component of the vehicle’s steering, suspension, and braking systems, supporting the weight of the vehicle, housing the wheel bearings, and providing the mounting surface for the brake disc or drum and wheel.
The AZ9761451160 VGD95 711-50200-6880 front hub assembly is manufactured from high‑strength cast steel, selected for its excellent structural properties, fatigue resistance, and load‑bearing capacity. The casting is heat‑treated to relieve internal stresses and then precision‑machined on all critical surfaces, including the bearing bores, wheel stud holes, and brake mounting flange. This ensures a perfect fit and reliable performance over the life of the component.
This front hub assembly is engineered to withstand the extreme loads, vibrations, and impacts typical of heavy‑duty truck operation. Its robust construction and precise machining contribute to reduced bearing wear, improved steering response, and extended wheel‑end service intervals. Replacing a worn or damaged hub with the AZ9761451160 VGD95 711-50200-6880 restores proper wheel alignment and ensures safe, reliable vehicle operation.
Common signs that the front hub assembly needs replacement include excessive wheel play, unusual noise from the wheel end, uneven tire wear, vibration through the steering wheel, and visible cracks or damage to the hub casting. Replacing the hub with the AZ9761451160 VGD95 711-50200-6880 addresses these issues, restoring the vehicle’s wheel‑end integrity and ensuring continued safe operation. This OEM‑spec hub is the ideal choice for axle overhauls and preventive maintenance.
Whether you are performing a complete front axle rebuild or addressing a specific wheel‑end concern, the AZ9761451160 VGD95 711-50200-6880 Front Hub Assembly T5G delivers the quality, strength, and durability that SINOTRUK Howo professionals expect.
The AZ9761451160 VGD95 711-50200-6880 front hub assembly is specifically designed for SINOTRUK Howo T5G trucks equipped with the standard front axle configuration, as well as other heavy‑duty chassis that utilize this wheel‑end design. It is a direct OE replacement, ensuring a perfect fit with the existing axle housing, brake disc or drum, and wheel stud pattern without the need for modification or fabrication.
This front hub is essential for applications where the vehicle is subjected to heavy loads, harsh environments, and long operating hours, such as construction, mining, and long‑haul transport. In these conditions, the front hub is constantly exposed to extreme loads, vibration, and potential impact damage, which can lead to bearing failure, wheel misalignment, and steering performance issues. The AZ9761451160 VGD95 711-50200-6880 is engineered to provide long‑lasting structural integrity and reliable performance, ensuring the wheel end remains secure and the vehicle operates safely.
When replacing the front hub, it is recommended to inspect the wheel bearings, seals, brake disc or drum, and steering knuckle for signs of wear or damage. The AZ9761451160 VGD95 711-50200-6880 is designed to work with the factory components, ensuring proper bearing preload and alignment. It is suitable for both standard and heavy‑duty axle configurations.
For fleets with multiple HOWO trucks, standardizing on the AZ9761451160 VGD95 711-50200-6880 simplifies axle repair inventory and ensures the correct component is available for scheduled maintenance or emergency repairs. Always verify the vehicle model and axle configuration to confirm compatibility, though the AZ9761451160 VGD95 711-50200-6880 is the standard front hub for the majority of T5G applications.
Replacing the AZ9761451160 VGD95 711-50200-6880 front hub assembly is a complex procedure that requires mechanical expertise, specialized tools, and a clean work environment. This work should be performed by qualified technicians with experience in heavy‑duty truck axle repair. Begin by safely raising the vehicle and supporting the front axle on jack stands, then remove the wheels and brake caliper or drum.
Remove the old hub by extracting the bearing lock nut and retaining hardware, and carefully sliding the hub off the axle spindle or steering knuckle. Inspect the spindle, bearings, and seals for wear or damage. Clean all components thoroughly and replace any worn bearings or seals as needed.
Install the new AZ9761451160 VGD95 711-50200-6880 hub assembly onto the spindle, ensuring the bearings are properly packed with high‑quality grease and the seals are correctly seated. Adjust the bearing preload according to the manufacturer’s specification, then install the lock nut and retaining hardware. Reassemble the brake components, wheels, and any other removed parts.
After installation, check the wheel end for smooth rotation and proper alignment, and verify that the brakes and ABS function correctly. Perform a thorough road test to confirm smooth operation and proper steering response. For maintenance, periodically inspect the hub for signs of cracks, corrosion, or bearing play, and repack or replace the bearings as part of a comprehensive axle overhaul to ensure long‑term reliability.
The AZ9761451160 VGD95 711-50200-6880 front hub assembly is manufactured in an ISO 9001‑certified facility using advanced casting, heat‑treatment, and CNC machining processes. The cast steel is sourced from certified foundries and undergoes chemical and mechanical testing to ensure it meets GGG‑50 specifications for tensile strength, ductility, and fatigue resistance.
Each casting is radiographically inspected for internal porosity and defects before machining. The CNC machining process maintains tight tolerances on all critical dimensions, including bearing bores, wheel stud holes, and brake mounting surfaces. The hub is then phosphate‑coated to provide corrosion resistance and a paint‑ready surface.
Every hub undergoes a final dimensional inspection using CMM equipment, along with a torque‑retention test on the wheel studs. Random samples from each production batch are subjected to dynamic load testing and fatigue cycling to simulate real‑world axle loads, validating long‑term reliability and safety.
We back the AZ9761451160 VGD95 711-50200-6880 with a comprehensive 12‑month warranty against material and workmanship defects. Our rigorous quality control ensures that every hub delivers the same fit, performance, and durability as the original factory component, giving you confidence in your vehicle’s front axle integrity.
The AZ9761451160 VGD95 711-50200-6880 Front Hub Assembly T5G is a critical component for maintaining the safety, integrity, and performance of your Howo truck’s front axle. A worn, cracked, or damaged hub can lead to bearing failure, wheel misalignment, and brake or steering performance issues, all of which can compromise vehicle safety and lead to costly repairs. By replacing it with this genuine OEM‑grade component, you restore the vehicle’s wheel‑end integrity and ensure continued safe operation.
Manufactured from high‑strength cast steel with precision‑machined bearing bores and a durable corrosion‑resistant coating, the AZ9761451160 VGD95 711-50200-6880 offers outstanding structural integrity, load capacity, and long‑term durability. Its robust design and exact mounting points ensure a seamless fit and easy installation, while its durable finish resists rust and environmental damage for years of reliable service.
Fleet operators will benefit from reduced axle repair costs, improved vehicle safety, and better fleet uptime. Owner‑operators gain peace of mind knowing their front axle is supported by a component that meets strict OEM standards and is backed by a comprehensive warranty.
Invest in the AZ9761451160 VGD95 711-50200-6880 and ensure your SINOTRUK Howo remains safe, reliable, and productive on every job.
Order your AZ9761451160 VGD95 711-50200-6880 today and restore your truck’s front wheel‑end integrity.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
