- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The WG9900240219 Control Linkage Plate Assembly is a precision-engineered mechanical component that transmits driver shift commands from the gear lever to the transmission in SINOTRUK Howo heavy-duty trucks. As a premier supplier of genuine Sinotruk howo parts, we offer this linkage plate assembly as a direct OEM replacement, manufactured to the original equipment’s stringent standards. The assembly features a heavy-duty steel plate with precision-machined pivot points and wear-resistant bushings, providing smooth, accurate shift feel, exceptional durability, and reliable performance under the continuous mechanical loads and vibration typical of heavy-duty trucking.
This control linkage plate assembly (OEM WG9900240219) is critical for maintaining precise gear selection, reducing shift effort, and protecting the transmission from misshifts. Its optimized geometry and hardened pin connections ensure positive engagement and consistent shift travel. The WG9900240219 is built to endure the rigors of long-haul transport, off-road operations, and severe environmental exposure, delivering dependable service over thousands of miles.
OEM direct replacement • Heavy-duty steel plate • Wear-resistant bushings • Precision pivot points
The WG9900240219 Control Linkage Plate Assembly is a key mechanical interface between the gear shift lever and the transmission selector shaft in SINOTRUK Howo trucks. It translates the driver’s fore-aft and side-to-side movements into precise cable or rod actuation, ensuring accurate gear engagement. Engineered as a direct OEM replacement, this assembly guarantees correct geometry, smooth pivot action, and reliable force transmission. Manufactured to the original specifications, it ensures a seamless fit and consistent shift performance.
The plate assembly is constructed from high-strength steel, stamped and welded to form a rigid, lightweight structure. The pivot holes are fitted with self-lubricating bronze or PTFE-lined bushings that minimize friction and wear, ensuring consistent shift effort over millions of cycles. The plate features precisely located mounting holes and slots for cable or rod attachment, with hardened pins and retaining clips for secure connections. A corrosion-resistant e-coat and powder topcoat protect the assembly from rust and road salt.
This control linkage plate is essential for smooth, accurate gear changes, reducing driver fatigue and preventing transmission damage caused by missed or sloppy shifts. Its robust construction and precise engineering guarantee reliable performance over extended service intervals, meeting the rigorous demands of heavy-duty trucking. It is the direct replacement you can trust to keep your SINOTRUK Howo shifting precisely.
The WG9900240219 Control Linkage Plate Assembly is specifically designed for SINOTRUK Howo heavy-duty trucks, including Howo A7, T7H, T5G, and other models that use a mechanical linkage or cable-actuated shift system. It is compatible with the standard shift tower and transmission selector shaft configurations, making it the ideal replacement for restoring crisp, accurate gear changes.
This assembly is suitable for a wide range of applications, including long-haul trucking, regional distribution, construction, mining, and agricultural operations. The robust construction and precise pivot action ensure reliable shifting even under sustained heavy loads and frequent gear changes.
When replacing, always verify the mounting hole pattern and pin diameters to ensure a perfect match. The WG9900240219 is a direct-fit component that simplifies maintenance and restores original shift feel.
Installing the WG9900240219 Control Linkage Plate Assembly requires basic hand tools and careful attention to alignment. Begin by safely elevating the vehicle and removing any splash shields or covers to access the shift linkage. Disconnect the shift cables or rods from the old plate assembly, noting their positions for reassembly. Remove the retaining clips and pivot pins, then withdraw the old plate.
Clean the mounting area and inspect the shift cables or rods for wear. Install the new plate by aligning the pivot holes with the bracket. Insert the pivot pins and secure them with new retaining clips. Reattach the shift cables or rods to their respective positions, ensuring correct adjustment of the cable ends. Verify that all fasteners are torqued to the manufacturer’s specifications.
After installation, operate the gear shift through all positions to check for smooth, positive engagement and full travel. Adjust the cable or rod length as needed to achieve proper shift pattern. Regular maintenance includes lubricating the pivot points with a suitable grease during routine service. Inspect the bushings for wear and the pins for corrosion. Replace any worn components as needed.
This assembly is engineered for long life, but proper lubrication and adjustment ensure consistent shift quality and driver comfort.
This control linkage plate assembly is manufactured in an ISO 9001-certified facility using high-quality steel and precision components. The steel is sourced from approved mills and tested for tensile strength and formability. The stamping, welding, and machining processes are tightly controlled to maintain consistent dimensional accuracy and structural integrity.
Each assembly undergoes 100% inspection for plate flatness, bushing fit, and pivot hole alignment. We also perform pivot pin hardness verification and pull-out testing. Random samples are subjected to durability testing on a shift cycle rig, simulating millions of shift operations to confirm long-term reliability. The corrosion resistance of the coating is validated through salt spray testing per ASTM B117.
Our commitment to quality ensures a linkage plate that delivers smooth, accurate shifting, reducing driver fatigue and protecting the transmission from missed shifts. Backed by a comprehensive warranty, this assembly offers peace of mind for fleet operators and owner-operators.
Choose genuine quality for your shift control system – choose the WG9900240219 OEM control linkage plate assembly.
The WG9900240219 Control Linkage Plate Assembly is a critical component that directly influences shift quality, driver comfort, and transmission longevity. Its robust steel construction, precision bushings, and optimized geometry guarantee smooth, accurate gear changes, reducing effort and improving vehicle control. It is the genuine solution you need.
By choosing this genuine OEM-quality assembly, you avoid the risks of sloppy shifts, bushing wear, and missed engagements that can occur with inferior aftermarket parts. It is engineered for long-lasting performance, reducing maintenance intervals and protecting your transmission from unnecessary wear. The WG9900240219 delivers the reliability you expect from a genuine SINOTRUK Howo component.
Fleet operators will benefit from improved driver satisfaction, reduced shift-related repairs, and smoother gear changes. Owner-operators will gain confidence in their vehicle’s ability to handle heavy loads and challenging terrain without compromising shift precision. This assembly is the dependable choice for professionals who prioritize performance and durability.
Invest in this OEM linkage plate and experience the difference that genuine quality makes. Its proven reliability and engineering excellence make it the smart choice for anyone who demands the best from their SINOTRUK Howo. The WG9900240219 sets the standard for shift linkage components in heavy-duty trucks.
Order your WG9900240219 Control Linkage Plate Assembly today and ensure your truck shifts precisely and reliably for miles to come.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
