- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The AZ9900240201 Transmission Shift Lever is a precision-engineered control component that provides accurate, reliable gear selection for SINOTRUK Howo heavy-duty trucks. As a premier supplier of genuine Sinotruk howo parts, we offer this shift lever as a direct OEM replacement, manufactured to the original equipment’s stringent standards. The lever is forged from high-strength steel with a durable corrosion-resistant coating, featuring precision-machined pivot points and an ergonomic knob, ensuring smooth, positive shift feel and exceptional longevity under the continuous mechanical loads and vibration typical of heavy-duty trucking.
This transmission shift lever (OEM AZ9900240201) is critical for maintaining accurate gear engagement, reducing driver effort, and preventing misshifts that can damage the transmission. Its optimized bend geometry and hardened pivot bushings ensure consistent shift travel and precise detent action. The AZ9900240201 is built to endure the rigors of long-haul transport, off-road operations, and severe environmental exposure, delivering dependable service over thousands of miles.
OEM direct replacement • Forged steel • Precision pivot bushings • Ergonomic shift knob
The AZ9900240201 Transmission Shift Lever is a primary control interface that connects the driver’s hand to the transmission selector mechanism in SINOTRUK Howo trucks. Engineered as a direct OEM replacement, this lever guarantees correct shift pattern geometry, precise detent engagement, and smooth, consistent operation. Manufactured to the original equipment specifications, it ensures a seamless fit and reliable shift performance.
The lever is forged from high-strength alloy steel, providing exceptional rigidity and resistance to bending or fatigue. The lower end features precision-machined pivot holes with hardened steel bushings that reduce friction and wear, ensuring a consistent shift feel over millions of cycles. The upper portion is shaped ergonomically and fitted with a durable, slip-resistant knob that offers a comfortable grip. The entire lever is coated with a corrosion-resistant e-coat and powder finish, protecting against rust, road salt, and moisture.
This shift lever is essential for accurate, positive gear changes, reducing driver fatigue and preventing transmission damage caused by vague or missed shifts. Its robust construction and precise engineering guarantee reliable performance over extended service intervals, meeting the rigorous demands of heavy-duty trucking. It is the direct replacement you can trust to keep your SINOTRUK Howo shifting accurately and smoothly.
The AZ9900240201 Transmission Shift Lever is specifically designed for SINOTRUK Howo heavy-duty trucks, including Howo A7, T7H, T5G, and other models that use a floor-mounted shift lever with this geometry. It is compatible with the standard shift tower base and linkage connections, making it the ideal replacement for restoring crisp, accurate gear changes.
This lever is suitable for a wide range of applications, including long-haul trucking, regional distribution, construction, mining, and agricultural operations. The robust construction and precise pivot action ensure reliable shifting even under sustained heavy loads and frequent gear changes.
When replacing, always verify the lever length, bend angle, and pivot hole diameter to ensure a perfect match. The AZ9900240201 is a direct-fit component that simplifies maintenance and restores original shift feel.
Installing the AZ9900240201 Transmission Shift Lever requires basic hand tools and careful alignment. Begin by safely elevating the vehicle or accessing the shift tower from inside the cab. Remove the shift knob and any trim covering the lever base. Disconnect the shift cable or linkage from the lever. Remove the retaining clip and pivot pin securing the lever to the tower.
Clean the pivot area and inspect the bushings and pivot pin for wear. Install the new lever by aligning the pivot holes and inserting the pivot pin, securing it with a new retaining clip. Reconnect the shift cable or linkage, ensuring correct adjustment of the cable ends. Install the shift knob and tighten it to the specified torque. Verify that the lever moves smoothly through all gear positions without binding.
After installation, check the shift pattern and adjust the cable or linkage if necessary to ensure full engagement of all gears. Regular maintenance includes lubricating the pivot points with a suitable grease during routine service. Inspect the bushings for wear and the lever for signs of corrosion or damage. Replace any worn components as needed.
This lever is engineered for long life, but proper lubrication and adjustment ensure consistent shift quality and driver comfort.
This shift lever is manufactured in an ISO 9001-certified facility using high-quality forged steel and precision components. The steel is sourced from approved mills and tested for tensile strength and formability. The forging and machining processes are tightly controlled to maintain consistent dimensional accuracy and structural integrity.
Each lever undergoes 100% inspection for bend angle, pivot hole alignment, and bushing fit. We also perform hardness testing and pull-out verification on the pivot pin. Random samples are subjected to durability testing on a shift cycle rig, simulating millions of shift operations to confirm long-term reliability. The corrosion resistance of the coating is validated through salt spray testing per ASTM B117.
Our commitment to quality ensures a shift lever that delivers smooth, accurate shifting, reducing driver fatigue and protecting the transmission from missed shifts. Backed by a comprehensive warranty, this lever offers peace of mind for fleet operators and owner-operators.
Choose genuine quality for your shift control system – choose the AZ9900240201 OEM transmission shift lever.
The AZ9900240201 Transmission Shift Lever is a critical component that directly influences shift quality, driver comfort, and transmission longevity. Its forged steel construction, precision bushings, and optimized geometry guarantee smooth, accurate gear changes, reducing effort and improving vehicle control. It is the genuine solution you need.
By choosing this genuine OEM-quality lever, you avoid the risks of sloppy shifts, bushing wear, and missed engagements that can occur with inferior aftermarket parts. It is engineered for long-lasting performance, reducing maintenance intervals and protecting your transmission from unnecessary wear. The AZ9900240201 delivers the reliability you expect from a genuine SINOTRUK Howo component.
Fleet operators will benefit from improved driver satisfaction, reduced shift-related repairs, and smoother gear changes. Owner-operators will gain confidence in their vehicle’s ability to handle heavy loads and challenging terrain without compromising shift precision. This lever is the dependable choice for professionals who prioritize performance and durability.
Invest in this OEM shift lever and experience the difference that genuine quality makes. Its proven reliability and engineering excellence make it the smart choice for anyone who demands the best from their SINOTRUK Howo. The AZ9900240201 sets the standard for transmission shift levers in heavy-duty trucks.
Order your AZ9900240201 Transmission Shift Lever today and ensure your truck shifts precisely and reliably for miles to come.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
