- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
When your SINOTRUK Howo heavy truck requires a dependable clutch engagement system, the 712W30000-6002 Clutch Plate delivers factory‑grade durability and precision. As a genuine Sinotruk howo parts component, this clutch plate is engineered for the chassis‑level torque demands of construction, mining, and long‑haul applications, ensuring smooth power transfer and extended service life under the toughest operating conditions.
The 712W30000-6002 Clutch Plate is a direct‑fit OEM replacement for SINOTRUK Howo trucks, manufactured to the same dimensional tolerances and friction material specifications as the original equipment. Designed for 430‑mm clutch assemblies with 10‑spline hubs, this plate provides consistent pedal feel, minimal chatter, and reliable disengagement even under repeated heavy‑load starts. Whether you are operating a Howo T7H dump truck or a Sitrak C7H tractor, this clutch plate ensures that engine power is transmitted to the driveline with minimal slippage and maximum efficiency.
Optimised friction materials withstand extreme temperature spikes during repeated clutch engagements.
Specially engineered cushion springs reduce driveline shock and improve drivability.
Precision‑balanced to minimise vibration at high RPM, extending transmission life.
Matches OEM bolt pattern and spline count – no modifications required for installation.
The 712W30000-6002 Clutch Plate is an integral part of the powertrain chassis system, directly affecting vehicle launch, gearshift quality, and fuel economy. Worn or substandard clutch plates lead to increased fuel consumption, premature flywheel wear, and unplanned downtime. By choosing this genuine SINOTRUK component, fleet operators ensure that their vehicles maintain peak performance and comply with original equipment warranty requirements.
The 712W30000-6002 Clutch Plate is built with a reinforced hub and damper spring assembly that absorbs torsional vibrations from the engine, protecting the gearbox from shock loads. The friction material is formulated to deliver a stable coefficient of friction across a wide temperature range, from cold start to continuous heavy hauling. In independent dynamometer tests, this clutch plate demonstrated a 20% higher fade resistance compared to generic aftermarket units, ensuring consistent clutch feel and pedal modulation even after repeated hill starts or aggressive shifting.
Moreover, the plate’s precision‑ground facing surface ensures full contact with the flywheel and pressure plate from the first engagement, eliminating the need for a lengthy break‑in period. This reduces the risk of hot spots and premature glazing, giving fleet owners a reliable, low‑maintenance solution. When combined with a genuine SINOTRUK pressure plate and release bearing, the 712W30000-6002 forms a clutch system that delivers OEM‑level reliability and driving comfort.
Installing the 712W30000-6002 Clutch Plate is a standard procedure for any qualified truck workshop. The plate comes pre‑aligned with a pilot tool (not included) to centre the disc on the flywheel. Its 10‑spline hub matches the transmission input shaft of all SINOTRUK Howo and Sitrak models equipped with the 430‑mm single‑plate dry clutch. Always replace the clutch plate together with the pressure plate and release bearing for optimal results, and torque the flywheel bolts to the factory settings specified in the service manual.
Compatibility is broad: the 712W30000-6002 fits Howo T7H (6×4, 8×4), Sitrak C7H and C9H on‑road tractors, as well as Howo TX and G7S vocational trucks with manual or automated manual transmissions (AMT) that use the standard 430‑mm clutch cover. For off‑highway applications such as dump trucks and mixers, this plate’s heavy‑duty friction material handles the additional inertia and frequent starts without degradation.
Every 712W30000-6002 Clutch Plate is manufactured in SINOTRUK’s state‑of‑the‑art facility, with 100% inspection of critical dimensions – including parallelity, runout, and spline pitch. The friction lining is bonded using a high‑temperature adhesive and cured under controlled pressure to eliminate delamination risks. Each unit is laser‑marked with the OEM number and production date, providing full traceability back to the raw material batch.
In addition to dimensional accuracy, the clutch plate undergoes a dynamic balancing test to ensure that vibration levels are within strict limits at all engine speeds. This reduces stress on the transmission input shaft and extends the life of the pilot bearing. For fleet operators who prioritise uptime, the 712W30000-6002 represents a cost‑effective investment that minimises the risk of secondary failures caused by a failing clutch disc.
The 712W30000-6002 Clutch Plate is packaged in a robust corrugated carton with foam inserts that secure the disc and prevent any distortion during transit. The packaging is designed to withstand stacking and vibration, ensuring that the friction surface and splines arrive in pristine condition. Each carton is clearly labelled with the SINOTRUK logo, OEM part number, and barcode for easy identification in warehouses and workshop inventory systems.
The 712W30000-6002 Clutch Plate is a genuine SINOTRUK OEM chassis component, engineered for direct replacement on Howo T7H, Sitrak C7H/C9H, Howo TX, and Howo G7S trucks (2016–2023). Always verify the clutch size and spline count against your vehicle’s specifications before ordering.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
