- ADDRESS：Wanda Plaza, Jinan, Shandong, China
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The WG9925521372 V‑type thrust rod assembly is a genuine SINOTRUK HOWO component engineered to precisely locate the rear axle and control torque reaction under heavy loads. As a critical element of the trusted Sinotruk howo parts family, this thrust rod ensures that the axle remains correctly aligned during acceleration, braking, and cornering, preventing driveline vibration and excessive tire wear. Manufactured from high‑strength alloy steel with induction‑hardened ball studs and durable rubber bushings, the WG9925521372 unit withstands the extreme forces encountered in mining, construction, and long‑haul applications. Its robust V‑shaped design provides superior lateral and longitudinal stability, making it an essential component for maintaining chassis integrity and handling performance.
V‑Type Thrust Rod Assembly
V‑образная реактивная штанга в сборе
Barra de empuje tipo V
The WG9925521372 thrust rod is fabricated from high‑tensile alloy steel tubes with forged ends, providing exceptional strength while minimizing weight. The V‑shape configuration triangulates the axle attachment points, effectively controlling both lateral and longitudinal forces during vehicle operation. The ball studs are induction‑hardened to 58‑62 HRC and coated with a corrosion‑resistant finish, ensuring long‑term durability even in abrasive environments. High‑capacity rubber bushings at each pivot point absorb shock and vibration, reducing noise and extending component life.
Each WG9925521372 assembly undergoes 100% dimensional inspection and magnetic particle testing to ensure freedom from cracks or defects. The bushings are pre‑pressed and lubricated with high‑temperature grease, and the ball studs are tested for axial and radial play to meet strict OEM tolerances. This rigorous quality control guarantees that the thrust rod will maintain precise axle alignment under the heaviest loads, improving tire life and driver comfort.
The table below provides detailed technical data for the genuine SINOTRUK HOWO WG9925521372 V‑type thrust rod assembly. These specifications are essential for verifying compatibility.
| Parameter | Specification | Details |
|---|---|---|
| OEM Part Number | WG9925521372 | SINOTRUK HOWO Original Code |
| Product Name | V‑Type Thrust Rod Assembly | For rear axle location |
| Material | Alloy steel tube, forged ends | High tensile strength |
| Ball Stud Hardness | 58‑62 HRC (induction hardened) | Wear resistant |
| Bushing Type | Natural rubber, pre‑stressed | Vibration damping |
| Overall Length (center to center) | Approx. 850 mm (per leg) | Varies by application |
| Ball Stud Diameter | 32 mm | Hard chrome plated |
| Thread Size (ball stud) | M30 x 2.0 | Metric fine |
| Maximum Axial Load | 150 kN | Per rod |
| Weight (approx.) | 18 kg | Complete assembly |
| Applicable Models | Howo T7H, A7, Howo‑7 with rear tandem axle | Check axle type |
The WG9925521372 V‑type thrust rod assembly is a direct OEM replacement used on Howo heavy‑duty trucks equipped with tandem rear axles. It connects the axle housing to the chassis frame, controlling axle wind‑up during acceleration and braking while maintaining lateral stability during cornering. The V‑shaped design is particularly effective on vehicles operating in off‑road conditions, where axle articulation is high and suspension forces are severe.
In chassis applications, a worn or damaged thrust rod can lead to axle misalignment, causing rapid tire wear, driveline vibration, and poor handling. The genuine WG9925521372 ensures that the axle remains correctly positioned, extending tire life and improving driver control. It is essential for mining trucks, dumpers, and heavy haulage vehicles that operate under extreme loads and rough terrain.
When replacing a thrust rod, always inspect the axle brackets and frame mounting points for wear or elongation. Replace all four rods (if applicable) as a set to maintain even handling and alignment.
Correct installation of the WG9925521372 thrust rod is critical to ensure proper axle location and long service life. Follow these steps:
Safely lift the vehicle and support the axle. Remove the old thrust rod by unbolting the ball studs from the axle brackets and frame. Clean all mounting surfaces thoroughly.
Position the new thrust rod and loosely install the ball stud nuts. Ensure the rod is oriented correctly (V opens toward the front or rear as per vehicle design). Lower the axle to normal ride height before final tightening.
Torque the ball stud nuts to the specification in the service manual (typically 350‑400 Nm). Lower the vehicle and check axle alignment. Test drive to verify no vibration or unusual noise.
A worn thrust rod can cause significant handling and tire wear issues. Common signs that replacement is needed include:
If any of these symptoms are observed, immediate replacement with a genuine WG9925521372 assembly is recommended. Neglecting a worn thrust rod can lead to axle misalignment and accelerated wear of other suspension components.
The V‑shape design triangulates forces, keeping the axle perfectly aligned under all operating conditions, reducing tire wear and improving handling.
Durable rubber bushings and hardened ball studs absorb shocks and reduce wear on other suspension components, lowering maintenance costs.
Manufactured to original specifications, the thrust rod bolts directly into place, eliminating the need for modification and ensuring correct geometry.
To maximize the service life of your WG9925521372 thrust rod, follow these best practices:
By adhering to these guidelines, you ensure that the WG9925521372 thrust rod performs optimally throughout its intended service interval.
Aftermarket thrust rods often use lower‑grade steel, inferior bushings, and poorly hardened ball studs, leading to premature wear and potential failure. The genuine WG9925521372 is manufactured to the exact specifications of the original equipment, using high‑strength alloy steel and precision‑molded rubber bushings. Each assembly is tested for dimensional accuracy and load capacity, guaranteeing that it will perform exactly as the original part.
By choosing authentic SINOTRUK HOWO parts, you protect your investment and ensure your truck maintains its handling, tire life, and resale value. The Sinotruk howo parts catalog includes a full range of chassis components engineered for maximum durability. For fleet managers and owner‑operators who demand the best, the genuine WG9925521372 is the only responsible choice.
The WG9925521372 thrust rod is used across a wide range of Howo models: T7H, A7, and classic Howo‑7 series with HC16, HC18, and ST16 rear axles. It is typically fitted to the upper position of the rear suspension. Always verify the rod length and bushing orientation using the service manual.
Each WG9925521372 is individually packaged in a sturdy cardboard box with foam supports to prevent damage during shipping. The package includes the thrust rod assembly and the necessary mounting nuts (if applicable). For bulk orders, rods are shipped in sealed cartons with batch traceability.
Production of the WG9925521372 takes place in IATF 16949 certified facilities, using robotic welding and CNC machining with in‑process gauging. Statistical process control ensures that dimensional variations are kept to a minimum. Every batch is accompanied by a material certificate and load test report, guaranteeing that the rods delivered are identical to those fitted on new Howo trucks at the factory.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
