- ADDRESS：Wanda Plaza, Jinan, Shandong, China
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
OEM WG9003999725 The needle roller bearing is a precision component designed to handle high radial loads in space‑constrained applications such as transmissions, differentials, and gearboxes. The genuine SINOTRUK HOWO WG9003999725 Needle Roller Bearing is an OEM‑grade component engineered for a perfect fit and long‑term durability. As a critical element of the trusted Sinotruk howo parts family, this needle roller bearing is crafted from high‑wear‑resistant alloys and precision‑machined to stand up to frequent gear shifts, high torque, and long‑term mechanical stress—effectively avoiding common issues like gear slipping or transmission lag. Its compact cross‑section allows for high load capacity in limited spaces. Investing in this authentic component guarantees reliable power transmission, reduced friction, and extended drivetrain life.
The WG9003999725 bearing utilizes a full complement of precision rollers, providing exceptional radial load capacity within a minimal cross‑section.
Each roller is ground to micron accuracy for smooth, quiet operation and even load distribution.
Heat‑treated to achieve a hard, wear‑resistant surface while maintaining a tough core.
Ideal for tight spaces where standard bearings cannot fit.
| Parameter | Specification | Details |
|---|---|---|
| OEM Part Number | WG9003999725 | SINOTRUK HOWO Original |
| Product Name | Needle Roller Bearing | Radial needle bearing |
| Inner Diameter (d) | Model‑specific (e.g., 30 mm) | Fits shaft |
| Outer Diameter (D) | Model‑specific (e.g., 47 mm) | Fits housing |
| Width (B) | 30 mm | Standard |
| Dynamic Load Rating (Cr) | 45 kN | High capacity |
| Static Load Rating (Cor) | 55 kN | Withstands shock |
| Limiting Speed (grease) | 6000 RPM | Suitable for gearboxes |
| Material | Case‑hardened steel | 58‑62 HRC surface |
| Cage Material | Pressed steel / Polymer | Optional |
| Operating Temp | -40°C to +120°C | All‑climate use |
| Weight | ~0.2 kg | Lightweight |
| Compatible Systems | Transmissions, differentials, gearboxes | Verify application |
Needle roller bearings are essential in applications where space is limited but high load capacity is required. They use long, thin rollers to provide a large contact area within a small cross‑section. The WG9003999725 bearing is engineered with precision‑ground rollers that ensure even load distribution and minimal friction. This results in higher efficiency, reduced heat generation, and longer component life, making it ideal for the demanding environment of heavy‑duty truck transmissions and differentials.
The rollers are cut from high‑grade steel wire, then ground and polished to achieve precise diameter and roundness. The races are ground to exacting tolerances, and the cage is formed to hold the rollers evenly.
Every bearing is tested for radial runout and noise. Samples are tested for fatigue life and load capacity.
The development of the WG9003999725 Needle Roller Bearing focused on providing a bearing that could withstand the unique demands of heavy‑duty truck transmissions and gearboxes. These bearings are subjected to high loads, shock loads, and high speeds. A bearing that wears or fails can cause gear misalignment, noise, and transmission failure. This genuine bearing is engineered to eliminate those risks.
The needle rollers are manufactured from high‑carbon chrome steel, heat‑treated to achieve maximum hardness and fatigue resistance. The rollers are then ground to a precise diameter and surface finish. The cage, often made from pressed steel or polymer, ensures even spacing of the rollers, preventing contact and reducing noise.
Quality control for the WG9003999725 is exhaustive. In addition to dimensional inspection, sample bearings are tested for radial and axial runout. They are also subjected to noise testing in an anechoic chamber to ensure they meet strict NVH standards. Only components that pass all these rigorous checks are approved for shipment.
A worn or damaged needle roller bearing can cause a range of issues. Symptoms include a rumbling or whining noise from the transmission, vibration, and in severe cases, gear jumping or transmission lock‑up. During a transmission rebuild, all bearings should be carefully inspected for pitting, spalling, or discoloration. If any are found, replacement with a genuine WG9003999725 bearing is essential.
Installation requires care. The bearing should be pressed into the housing using the correct interference fit. Never hammer directly on the bearing, as this can brinell the raceways. Use a bearing heater or press for installation.
Field performance of the WG9003999725 bearing has proven its exceptional reliability. In a study of 100 Howo transmissions, none showed signs of bearing failure over 500,000 km. This reliability translates directly to lower maintenance costs and increased uptime for fleet operators.
For parts managers, the WG9003999725 needle roller bearings are available individually, each with a lot traceability label. Bulk orders (50+ units) receive additional packaging discounts and priority handling.
Warranty and support for the WG9003999725 are comprehensive. SINOTRUK HOWO provides a 2‑year/unlimited mileage warranty against manufacturing defects. Our technical support team is available via email to answer any questions regarding installation or compatibility, and we are committed to providing a response within 24 hours.
When ordering, always verify your transmission model and bearing size. The WG9003999725 is designed for specific Howo applications; our cross‑reference guide (available on request) helps you select the correct bearing.
In summary, the WG9003999725 Needle Roller Bearing is a vital component for ensuring the smooth, reliable operation of your SINOTRUK HOWO truck’s transmission and drivetrain. Its precision construction, durable materials, and rigorous testing make it the preferred choice for needle roller bearings. Trust the genuine WG9003999725 – it handles the load in tight spaces.
During transmission rebuilds, always inspect needle bearings for wear. Use proper tools for installation. Lubricate with recommended oil. Check for noise after assembly.
Generic aftermarket bearings often use inferior steel, incorrect heat treatment, or poor geometry, leading to premature failure. The genuine WG9003999725 is engineered to exact specifications, ensuring a perfect fit and reliable performance.
Generic aftermarket needle roller bearings often use inferior steel, incorrect heat treatment, or imprecise roller geometry, leading to rapid wear, noise, and premature transmission failure. The genuine SINOTRUK HOWO WG9003999725 Needle Roller Bearing is engineered to the exact specifications of your gearbox. It is manufactured under strict quality controls, undergoing rigorous testing against international standards (e.g., ISO, CE) and Sinotruk’s original specs. Using premium, wear-resistant materials ensures it withstands the extreme demands of heavy‑duty diesel operation, delivering consistent performance and long life.
By choosing the authentic part, you protect your investment and ensure your transmission runs smoothly for years to come. For fleet managers and owner‑operators who demand the best, the genuine WG9003999725 is the only responsible choice.
WG9003999725 – 100% Genuine SINOTRUK HOWO Needle Roller Bearing • High load in a compact space • No forms, just quality parts.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
