- ADDRESS：Wanda Plaza, Jinan, Shandong, China
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
A consistent and clean fuel supply is the lifeblood of any modern diesel engine. The genuine 60213186 Lift Pump is a critical electric or mechanical fuel supply pump engineered by SANY to ensure reliable low-pressure fuel delivery from the tank to the high-pressure injection system. As an essential component within the trusted portfolio of authentic SANY parts, this pump plays a foundational role in the fuel system’s efficiency and reliability.
The 60213186 is designed to maintain optimal fuel pressure, prime the system, and ensure a steady, bubble-free flow of filtered diesel to the injection pump or common rail. Choosing the OEM part 60213186 is a direct investment in preventing fuel starvation, ensuring easy cold starts, and protecting expensive high-pressure injection components from damage caused by cavitation or inadequate lubrication.
Lift Pump
Подкачивающий насос
Bomba de Alimentación
The SANY Lift Pump, part number 60213186, operates on the low-pressure side of the fuel system. Its primary mission is to draw fuel from the vehicle’s tank, push it through the primary fuel filter and water separator, and deliver it to the inlet of the high-pressure fuel injection pump at a specified pressure and volume. This is crucial because modern high-pressure pumps (common rail or unit injector systems) are not designed to suck fuel over long distances from the tank; they require a positive, pressurized supply. The 60213186 ensures this supply, preventing vapor lock and maintaining system priming.
By providing a consistent flow, the 60213186 lift pump helps the high-pressure injection system operate efficiently and protects it from damage. Inadequate supply pressure can cause the high-pressure pump to cavitate, leading to premature wear, overheating, and failure. Furthermore, a robust lift pump ensures quick engine starts by rapidly building up the required low-pressure fuel circuit pressure as soon as the ignition is switched on. In many systems, the 60213186 also plays a role in cooling and lubricating the high-pressure pump.
The 60213186 Lift Pump can be one of two main types, depending on the specific SANY engine application. The first is a robust electric fuel pump, typically mounted in the fuel tank (in-tank) or inline along the fuel line. This type is activated by the vehicle’s ECU or a relay when the ignition is turned on, providing immediate pressure. The second type is a mechanical lift pump, often driven by a camshaft or eccentric on the engine. This type operates continuously as long as the engine is running.
The table below details the primary technical parameters for the SANY Lift Pump. This data is essential for verifying the correct application and understanding its performance capabilities within your vehicle’s specific fuel system architecture.
| Parameter | Specification |
|---|---|
| OEM Part Number | 60213186 |
| Product Name | Lift Pump |
| Brand | SANY |
| Pump Type | Electric (In-Tank/Inline) or Mechanical (Engine-Driven) |
| Operating Voltage (Electric) | 12V or 24V DC (Vehicle System Specific) |
| Flow Rate | Engine Application Specific (e.g., >150 L/hr) |
| Output Pressure | Typically 3 – 7 Bar (Low-Pressure Side) |
| Port Connections | Inlet & Outlet for Standard Fuel Hose |
| Primary Application | SANY Truck Diesel Engine Low-Pressure Fuel Supply |
Installing the Lift Pump 60213186 requires attention to detail and safety. For electric pumps, first disconnect the vehicle’s battery. If it’s an in-tank pump, access is typically through a service hatch in the cargo floor or by lowering the fuel tank. Carefully disconnect the electrical connector, fuel lines, and remove the pump assembly from the tank or its mounting bracket. When installing the new genuine 60213186, ensure all seals and O-rings are new and properly seated to prevent leaks. Connect the fuel lines with new clamps and reconnect the electrical harness.
For mechanical pumps, timing alignment with the engine cam may be critical. Always refer to the service manual. After installation, the fuel system must be primed. For electric pumps, cycling the ignition key (without starting the engine) several times allows the pump to run and fill the system. For mechanical pumps, use the manual priming lever if equipped. Once primed, start the engine and check all connections for leaks. It is also good practice to replace the fuel filter whenever the lift pump is serviced to ensure clean fuel reaches the new 60213186 pump.
A failing Lift Pump 60213186 manifests through several clear symptoms related to fuel delivery. The most common is difficulty starting, especially when the engine is cold or after the vehicle has been sitting. The engine may crank for an extended period before starting. Under load, the driver may experience power loss, hesitation, or engine stalling as the pump fails to meet fuel demand. In severe cases, the engine may not start at all. For electric pumps, listen for a humming sound from the fuel tank area when the ignition is turned on; a silent pump may indicate electrical failure.
Diagnosis involves checking fuel pressure on the low-pressure side using a gauge at the service port (if equipped). Pressure readings below specification point to a weak pump or a restriction. Checking the pump’s electrical supply (voltage and ground) is crucial for electric pumps. Inspect the fuel filter for clogs, as a restricted filter can overload and damage the 60213186 pump. A visual inspection for fuel leaks around the pump body is also necessary. Regular preventative maintenance, including timely filter changes, is the best way to extend the service life of the lift pump.
The genuine 60213186 is engineered to deliver the exact flow rate and pressure required by the specific SANY engine model. This ensures the high-pressure injection pump receives an optimal supply, protecting it from cavitation and ensuring full engine power, fuel efficiency, and clean emissions.
As an OEM part, the 60213186 matches the original pump’s dimensions, mounting points, electrical connector, and port threads exactly. This allows for a hassle-free, bolt-on replacement without modifications, leaks, or compatibility issues with the vehicle’s wiring or fuel lines.
Constructed with OEM-grade materials and subject to rigorous testing, the 60213186 offers superior resistance to wear, fuel contamination, and electrical or mechanical stress. This results in reliable performance over a long service life, reducing the risk of unexpected breakdowns.
The SANY Lift Pump, OEM number 60213186, is a fundamental component that ensures the entire fuel injection system receives the clean, pressurized fuel it needs to operate correctly. Its failure not only causes drivability issues but can also lead to catastrophic and expensive damage to the high-pressure pump and injectors. Proactive maintenance and using the correct replacement part are critical for total cost of ownership and vehicle uptime.
Therefore, specifying the genuine 60213186 for replacement is a smart, preventative investment in the reliability and performance of your SANY truck. It is the definitive choice for fleet managers, technicians, and owner-operators who understand that the efficiency of the entire engine begins with a robust and reliable fuel supply. Trust the OEM part to deliver the precise engineering, durability, and perfect fit required for seamless operation.
Diesel fuel is flammable. Always work in a well-ventilated area, away from sparks or open flames. Relieve fuel system pressure and disconnect the battery before servicing electric pumps. Use appropriate personal protective equipment. Ensure all connections are tight and leak-free after installing the 60213186 pump. Dispose of used fuel and old components according to local environmental regulations. For complex installations, especially involving in-tank pumps or engine timing, consider having the work performed by a qualified technician.
If you have any questions about our products, services, or anything related to what we offer, please don’t hesitate to leave us a message—our dedicated team is always ready to provide prompt and helpful responses to address your concerns. What’s more, when you become our valued customer, we’re delighted to offer you complimentary catalog services, giving you access to detailed, up-to-date information on our full range of products, specifications, and offerings to help you make informed decisions.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
