LG9708680111: Premium Rear Shock Absorber Set for SINOTRUK Howo Ride Control

Core Function of Rear Shock Absorbers

The Rear Shock Absorber, part number LG9708680111, is a velocity-sensitive hydraulic damper. It is mounted between the vehicle’s frame and the rear axle. Its primary function is to control the motion of the suspension springs. When the wheel hits a bump, the spring compresses and then rebounds.

Without a shock absorber, this energy would cause the truck to oscillate uncontrollably. The LG9708680111 damper converts this kinetic energy into heat. It does this by forcing hydraulic fluid through small valves. This action dampens the spring’s movement, stabilizing the axle.

The genuine LG9708680111 is crucial for loaded and unloaded driving. It maintains consistent tire contact with the road surface. This improves braking, handling, and reduces wear on other chassis components. It is a key part of the suspension system.

Key Benefits of Genuine LG9708680111 Shock Absorbers

Technical Specifications: Shock Absorber LG9708680111

Symptoms of Worn Rear Shock Absorbers

Worn rear shock absorbers, part LG9708680111, exhibit clear handling and physical symptoms. Excessive bouncing after hitting a bump is a primary sign. The truck may continue to bounce two or three times before stabilizing. This indicates lost damping capability.

Nosediving during braking or squatting during acceleration suggests poor control. The vehicle may feel unstable or wander on the highway, especially in crosswinds. Uneven or cupped tire wear on the rear tires is a common result.

Visible fluid leaks on the shock body indicate seal failure. A knocking or clunking noise from the rear suspension over bumps can occur. The truck may sway excessively during cornering or lane changes. These signs mean the LG9708680111 needs inspection.

Driving with failed shocks is unsafe. It reduces braking efficiency and increases stopping distance. It also accelerates wear on tires and other suspension parts. Prompt replacement of the LG9708680111 set restores control and safety.

Replacement Procedure and Guidelines

Replacing rear shock absorbers is a straightforward task with proper preparation. Safely lift and support the rear axle, allowing the suspension to hang. Support the axle with a stand to prevent it from dropping. Locate the upper and lower mounting bolts.

Use penetrating oil on rusty bolts beforehand. Hold the shock body and remove the upper bolt first, then the lower bolt. Remove the old LG9708680111 shock. Compare the new genuine shock with the old one for identical dimensions.

Install the new LG9708680111 shock in the reverse order. Start by threading the lower mounting bolt hand-tight. Then install the upper bolt. Do not fully tighten either bolt until the vehicle is lowered to its normal ride height.

With the vehicle on the ground, bounce the rear end to settle the suspension. Then torque both mounting bolts to the manufacturer’s specification. Repeat for the other side. Always replace shocks in pairs (both rear) for balanced performance.

Importance for Cargo and Vehicle Safety

On a loaded truck, the rear shocks bear immense responsibility. They control the massive energy stored in the suspension springs. Effective dampers like LG9708680111 prevent dangerous axle hop and wheel lift. This maintains traction for braking and acceleration.

They also protect the cargo from excessive vertical G-forces. This is critical for fragile or high-value loads. By stabilizing the load, they reduce stress on cargo securing straps and the trailer structure. This enhances overall operational safety.

For the driver, a stable ride reduces fatigue and improves control. This directly contributes to accident prevention. Regular inspection and maintenance of the LG9708680111 shocks are therefore a key part of fleet safety protocols.

Why Choose the Genuine LG9708680111 Set

The genuine LG9708680111 shock absorber is valved specifically for the SINOTRUK Howo’s suspension dynamics. Its damping rates are calibrated for the vehicle’s weight distribution and spring rates. This ensures optimal performance both loaded and empty.

The seals and fluid are of the highest quality, ensuring long service life without leakage. The piston rod is precisely hardened and chrome-plated for corrosion resistance. Non-genuine shocks often fail prematurely due to inferior materials and incorrect valving.

The mounting hardware and dimensions are guaranteed to fit perfectly. This eliminates installation issues and ensures proper alignment. For a component that affects safety and vehicle longevity, the genuine LG9708680111 is the only reliable choice.

Conclusion: Invest in Stability with LG9708680111

The Rear Shock Absorber set, OEM number LG9708680111, is a fundamental component for controlling ride dynamics and ensuring safety. Its performance directly impacts handling, tire wear, cargo integrity, and driver comfort.

Choosing the genuine LG9708680111 part guarantees the engineered damping performance, durability, and perfect fit required for heavy-duty service. Maintain the stability and safety of your SINOTRUK Howo by trusting only authentic OEM suspension components for replacement.