- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The WG2203020072 Outer Straight‑Tooth Gear (16C 20716A) is a precision‑engineered transmission component designed for the heavy‑duty gearboxes of SINOTRUK Howo trucks, ensuring reliable power transmission and smooth gear engagement under the most demanding operating conditions. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM‑grade outer straight‑tooth gear as a direct replacement for the original factory component. The WG2203020072 gear delivers consistent torque transfer, reduced noise, and exceptional durability, ensuring optimal transmission performance and extended service life, even under extreme loads and frequent shifting cycles.
Manufactured from high‑grade alloy steel with precision‑cut straight teeth and advanced heat‑treatment, the WG2203020072 outer gear provides superior wear resistance and dimensional stability. Its robust design ensures efficient power transmission with minimal backlash, contributing to reduced driveline vibration and improved shifting quality. This gear is a critical component for maintaining transmission integrity in Howo 16‑speed gearboxes.
OEM WG2203020072 • 16C 20716A application • Alloy steel • Precision‑cut teeth • Direct OEM fit
The WG2203020072 is a premium outer straight‑tooth gear designed specifically for the 16‑speed manual and automated manual transmissions used in SINOTRUK Howo A7, T7H, and other heavy‑duty truck models. This gear is a critical component of the transmission’s gear train, responsible for transmitting torque from the input shaft to the countershaft and ultimately to the output shaft, enabling efficient power delivery and smooth gear changes.
The WG2203020072 outer gear is manufactured from high‑grade alloy steel, selected for its excellent strength, toughness, and wear resistance. The teeth are precision‑cut using advanced gear hobbing and shaving processes, ensuring accurate tooth profiles and optimal contact patterns. Each gear is heat‑treated and carburized to achieve a hard, wear‑resistant surface with a tough core, significantly extending its service life compared to standard gears.
This outer straight‑tooth gear is engineered to withstand the extreme torsional loads and high‑speed operation typical of heavy‑duty truck transmissions. Its robust construction and exacting tolerances contribute to reduced transmission noise, improved shift quality, and extended overhaul intervals. Replacing a worn or damaged gear with the WG2203020072 restores smooth, efficient power transmission and prevents costly transmission damage.
Common symptoms of a failing outer gear include whining or grinding noises during operation, difficulty shifting, and a noticeable loss of power. Replacing the gear with the WG2203020072 addresses these issues, restoring the transmission’s original performance and reliability. This OEM‑spec gear is the ideal choice for transmission overhauls and preventive maintenance.
Whether you are performing a complete transmission rebuild or addressing a specific driveline concern, the WG2203020072 Outer Straight‑Tooth Gear 16C 20716A delivers the quality, precision, and durability that SINOTRUK Howo professionals expect.
The WG2203020072 outer straight‑tooth gear is specifically designed for SINOTRUK Howo trucks equipped with the 16‑speed manual or automated manual transmissions that use the 16C 20716A gear set, commonly found in A7 and T7H series models. It serves as a direct replacement for the original outer gear and is compatible with all transmissions that utilize this specific gear design and mounting interface.
This outer gear is essential for applications involving high torque loads, frequent gear changes, and demanding operating conditions, such as long‑haul transport, construction, and mining. In these environments, the transmission gear train is subjected to extreme torsional stress that can quickly wear out a lower‑quality gear. The WG2203020072 is engineered to maintain consistent torque transfer and reduce wear, ensuring smooth power delivery and preventing premature transmission failure.
When replacing the outer gear, it is important to inspect the mating gears, shafts, and bearings for wear or damage. The WG2203020072 gear is designed to work with the factory transmission components, ensuring proper fit and alignment. It is compatible with both standard and heavy‑duty transmission configurations.
For fleets with multiple HOWO trucks equipped with 16‑speed transmissions, this gear standardizes driveline maintenance, simplifying parts inventory and ensuring the correct component is available for scheduled service or emergency repairs. Always verify the transmission model and gear specification on your specific truck to confirm compatibility, though the WG2203020072 is the standard outer gear for the majority of 16C 20716A applications.
Replacing the WG2203020072 outer straight‑tooth gear is a complex procedure that requires mechanical expertise, specialized tools, and a clean work environment. This work should be performed by qualified technicians with experience in heavy‑duty truck transmission repair. Begin by safely raising the vehicle and removing the transmission to access the gear train.
Carefully disassemble the transmission to expose the outer gear, taking note of the gear orientation, shim positions, and bearing preload settings. Remove the old gear using appropriate pullers or presses, taking care not to damage the shaft or adjacent components. Clean all parts thoroughly and inspect for wear or damage.
Install the new WG2203020072 gear onto the shaft, ensuring it is correctly oriented and fully seated. Check the gear backlash and contact pattern using Prussian blue or a similar method, and adjust shims if necessary to achieve the factory specifications. Reassemble the transmission, applying the correct assembly lubricant to all moving parts.
After installation, refill the transmission with the correct grade and quantity of lubricant, and perform a thorough road test to verify smooth, quiet operation with no unusual noise or vibration. For maintenance, regularly inspect the transmission for signs of wear or unusual noise, and replace the gear as part of a comprehensive transmission overhaul to ensure long‑term reliability.
The WG2203020072 outer straight‑tooth gear is manufactured in an ISO 9001‑certified facility using advanced gear cutting, heat‑treatment, and finishing processes. The alloy steel is sourced from certified mills and undergoes chemical and mechanical testing to ensure it meets SAE 8620 specifications for hardenability, tensile strength, and impact resistance.
Each gear is precision‑cut using state‑of‑the‑art CNC hobbing and shaving machines, ensuring accurate tooth profiles and optimal surface finish. The carburizing and hardening process is carefully controlled to achieve a consistent case depth and surface hardness, while the gear is finish‑ground to achieve the required dimensional tolerances and surface quality. Every gear is inspected for tooth geometry, pitch, and runout.
Every gear undergoes rigorous quality control checks, including dimensional verification, hardness testing, and magnetic particle inspection for surface defects. Random samples from each production batch are subjected to dynamic load testing and fatigue cycling to validate long‑term reliability under simulated transmission conditions.
We back the WG2203020072 with a comprehensive 12‑month warranty against material and workmanship defects. Our rigorous quality control ensures that every gear delivers the same performance, fit, and durability as the original factory component, giving you confidence in your transmission’s reliability.
The WG2203020072 Outer Straight‑Tooth Gear is a critical component for maintaining smooth, efficient power transmission and protecting the transmission from premature wear in your HOWO truck. A worn or damaged outer gear can lead to noisy operation, reduced power delivery, and costly transmission damage. By replacing it with this genuine OEM‑grade component, you restore the transmission’s original performance and reliability, improving drivability and fuel efficiency.
The WG2203020072 is manufactured from premium alloy steel with precision‑cut straight teeth and advanced case‑hardening, delivering the strength, wear resistance, and torque capacity required for heavy‑duty trucking. Its precision‑engineered fit ensures a perfect, secure installation, reducing backlash and vibration. This translates to improved transmission performance, reduced maintenance costs, and extended driveline life.
Fleet operators will benefit from reduced transmission maintenance, fewer unscheduled breakdowns, and lower overall repair costs. Owner‑operators will have peace of mind knowing their driveline is supported by a gear that meets OEM specifications and is backed by a comprehensive warranty.
Invest in the WG2203020072 Outer Straight‑Tooth Gear 16C 20716A and ensure your SINOTRUK Howo’s transmission delivers the reliable performance you expect.
Order your WG2203020072 today and keep your transmission operating at its best.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
