- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The WG1664242006 Lower Bumper is a rugged, precision-formed front underride guard designed specifically for SINOTRUK Howo heavy-duty trucks. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM-grade lower bumper as a direct replacement for the original factory component. The WG1664242006 lower bumper provides critical protection for the front chassis, radiator, and steering components against impact from road debris, curbs, and off-road obstacles. Manufactured from high-strength steel with a durable anti-corrosion coating, this lower bumper absorbs and distributes impact forces, minimizing damage to vital under-hood systems while maintaining the truck’s structural integrity. Its precise bolt-on design ensures a perfect fit on HOWO A7 and T7H chassis, restoring both safety and the factory appearance.
The WG1664242006 lower bumper is not merely a cosmetic trim piece – it is a functional safety component that helps prevent underride in collisions and shields expensive front-end equipment from stone chips, mud, and water ingress. Its robust construction and corrosion-resistant finish make it an essential replacement for damaged or worn units.
OEM direct replacement • High-strength steel construction • Corrosion-resistant coating • Impact-absorbing design • Bolt-on installation
The WG1664242006 is a lower bumper (also known as a front underride guard or lower valance) designed for the SINOTRUK Howo A7 and T7H series trucks. This component mounts to the front chassis crossmember, extending downward to protect the radiator, oil cooler, steering linkage, and front suspension components from ground-level impacts. This OEM-grade lower bumper replicates the original part’s mounting points, contours, and structural reinforcements, ensuring a seamless replacement that restores both safety and aerodynamic efficiency.
Constructed from cold-rolled high-strength steel with a thickness of 3.0 mm, the WG1664242006 offers exceptional resistance to bending and deformation. Its advanced e-coat primer and topcoat finish provide excellent corrosion protection, resisting rust and chipping even in salt-spray environments. The bumper also features integrated air intakes that direct cooling airflow to the lower radiator and transmission cooler, maintaining optimal operating temperatures.
In addition to its protective role, the WG1664242006 lower bumper contributes to the truck’s frontal aerodynamics by reducing turbulent airflow under the vehicle, which can improve fuel efficiency by up to 1.5% in highway driving. Its black powder-coated finish matches the original appearance, giving the truck a clean, professional look.
This lower bumper is interchangeable with earlier part numbers (WG1664242005) and is a popular choice for collision repairs, corrosion replacement, or fleet-wide front-end upgrades. Its robust yet lightweight design reduces overall vehicle weight without sacrificing strength.
The WG1664242006 Lower Bumper is specifically designed for SINOTRUK Howo A7 and T7H series trucks, including models ZZ4257, ZZ3257, and other variants with the same front crossmember configuration. It is a direct replacement for the original lower bumper and is also compatible with the earlier revision WG1664242005.
This lower bumper is used in a wide range of applications, including long-haul transport, regional distribution, construction, mining, and military logistics. In all these environments, the lower bumper is exposed to road debris, stones, mud, and occasional curb impacts. The WG1664242006 is engineered to withstand these harsh conditions while protecting critical front-end components.
When replacing a damaged, rusted, or missing lower bumper, the WG1664242006 provides a perfect fit and match to the factory mounting holes. It is compatible with both standard and heavy-duty front suspension setups, and its bolt-on design allows for quick installation without welding or modifications.
For fleets with mixed HOWO models, this part offers a standardized solution that simplifies parts inventory. Always verify the front crossmember style and ensure that the bumper is compatible with your specific chassis variant; the WG1664242006 covers the majority of A7 and T7H lower bumper applications.
Installing the WG1664242006 Lower Bumper requires basic mechanical skills and standard hand tools. Begin by safely raising the front of the truck and supporting it on jack stands. Remove the old bumper by unbolting the six M10 mounting bolts (two on each side and two in the center) using a socket wrench.
Clean the mounting surface on the front crossmember, removing any rust, dirt, or old gasket material. Inspect the threaded holes for damage; if any are stripped, use a thread chaser or replace with helicoils. Apply a thin coat of anti-seize compound to the new bolts to prevent future corrosion.
Position the new WG1664242006 bumper against the crossmember, aligning the six mounting holes. Insert the bolts and tighten them evenly in a crisscross pattern to the specified torque of 60–70 Nm. Ensure that the bumper sits level and that all edges are flush with the chassis.
For maintenance, regularly inspect the lower bumper for signs of rust, dents, or loose bolts. Wash it with a mild detergent and water to remove road salt and mud, especially during winter months. If the powder coating is chipped, touch up with a rust-inhibiting primer and black paint to prevent corrosion.
Replace the bumper immediately if it shows significant deformation or cracking, as a compromised lower bumper may fail to provide adequate protection in a collision. The WG1664242006 is designed for long-term durability, but extreme impacts or prolonged corrosion may necessitate replacement.
The WG1664242006 Lower Bumper is manufactured in an ISO 9001-certified facility using advanced stamping, welding, and finishing processes. The steel coils are sourced from certified mills and undergo chemical analysis to ensure they meet the S500MC grade specification for high-strength, formable steel.
Each bumper is subjected to a series of quality tests, including dimensional inspection using 3D coordinate measurement, weld integrity verification, and adhesion testing of the e-coat and powder coat layers. A random sample from each batch is subjected to 480 hours of salt spray testing per ASTM B117 to confirm corrosion resistance.
We back the WG1664242006 with a comprehensive warranty against material and workmanship defects. Our quality control ensures that every bumper delivers the same level of protection, fit, and finish as the original SINOTRUK Howo part, giving you confidence in your truck’s front-end safety.
Choose genuine quality for your front-end repairs – choose the WG1664242006 Lower Bumper.
The WG1664242006 Lower Bumper is a critical safety and protection component that guards your truck’s most vulnerable front-end systems. A missing or damaged lower bumper can expose the radiator, oil cooler, and steering linkages to impact from debris, curbs, or off-road obstacles, leading to costly breakdowns and unsafe operating conditions. By replacing it with this genuine OEM-grade part, you restore full underride protection and maintain the structural integrity of your HOWO.
The WG1664242006 is engineered to withstand the harshest conditions – from gravel roads to construction sites to frozen highways. Its high-strength steel construction absorbs impact energy, while its advanced coating system resists rust and chipping, ensuring that the bumper remains effective and visually appealing for years.
Fleet managers will appreciate the simple bolt-on replacement that minimizes downtime and eliminates the need for welding or fabrication. Owner-operators will gain peace of mind knowing that their truck meets ECE front underrun standards and that their expensive cooling and steering components are well protected.
Invest in the WG1664242006 Lower Bumper and protect your SINOTRUK Howo’s front end with the same quality that the manufacturer intended. Its robust construction, precise fit, and corrosion-resistant finish make it the smart choice for professionals who demand the best for their vehicles.
Order your WG1664242006 today and ensure your HOWO truck remains safe, durable, and ready for any challenge on or off the road.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
