- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The VG1540080027 Coarse Filter Bracket is a heavy-duty, precision-stamped mounting component designed to securely hold the primary fuel filter or water separator in SINOTRUK Howo heavy-duty trucks. As a trusted supplier of genuine Sinotruk howo parts, we offer this bracket as a direct OEM replacement, manufactured to the original equipment’s exacting specifications. The bracket is fabricated from high-strength steel with a durable corrosion-resistant coating, providing reliable support, vibration damping, and long-term structural integrity under the extreme chassis stresses and harsh environmental conditions typical of heavy-duty trucking.
This coarse filter bracket (OEM VG1540080027) is critical for maintaining the correct positioning of the filter assembly, ensuring proper hose alignment and preventing damage from road impacts or engine movement. Its precisely engineered mounting holes and reinforced ribs guarantee a perfect fit on the original mounting points, simplifying installation and reducing maintenance time. The VG1540080027 is built to endure the rigors of long-haul transport, off-road operations, and severe corrosion exposure, delivering dependable service over thousands of miles.
OEM direct replacement • High-strength steel • Corrosion-resistant coating • Precision mounting holes
The VG1540080027 Coarse Filter Bracket is a fundamental structural component that secures the primary fuel filter or water separator assembly to the chassis frame of SINOTRUK Howo trucks. Engineered for durability and exact fitment, this bracket ensures that the filter remains stable and properly aligned, preventing stress on fuel lines and electrical connections. It is manufactured to the original equipment specifications, guaranteeing a seamless replacement and long service life.
The bracket is formed from high-quality hot-rolled steel with a minimum yield strength of 350 MPa, providing exceptional rigidity and resistance to bending or fatigue. The design incorporates strategic reinforcement ribs and gussets that distribute loads evenly, reducing the risk of cracking under vibration. The surface is treated with a zinc-rich primer and a final powder-coated finish, offering superior protection against rust, road salt, and chemical exposure.
This filter bracket is essential for maintaining the integrity of the fuel system, preventing filter misalignment that could lead to leaks or contamination. Its robust construction and precise engineering guarantee reliable performance over extended service intervals, meeting the rigorous demands of heavy-duty trucking. It is the direct replacement you can trust to keep your SINOTRUK Howo’s fuel system secure and functional.
The VG1540080027 Coarse Filter Bracket is specifically designed for SINOTRUK Howo heavy-duty trucks, including Howo A7, T7H, T5G, and other models that mount the coarse fuel filter or water separator using this bracket configuration. It is compatible with the standard chassis frame rail mounting points and the associated filter assemblies, making it the ideal replacement for maintaining fuel system integrity.
This bracket is suitable for a wide range of applications, including long-haul trucking, regional distribution, construction, mining, and agricultural operations. The robust construction and corrosion resistance ensure reliable filter retention even under sustained heavy loads, high vibration, and extreme environmental conditions.
When replacing, always verify the mounting hole pattern and filter type to ensure a perfect match. The VG1540080027 is a direct-fit component that simplifies maintenance and restores original filter positioning.
Installing the VG1540080027 Coarse Filter Bracket requires basic hand tools and standard safety precautions. Begin by securely supporting the vehicle and ensuring the fuel system is depressurized. Remove the old bracket by unbolting it from the chassis frame and disconnecting any attached filter assembly. Clean the mounting area of dirt, rust, or old gasket material.
Position the new bracket against the frame rail, aligning the mounting holes with the original bolt holes. Install the supplied bolts (or reuse original ones) and tighten them to the specified torque – typically 35–45 N·m for M10 grade 10.9 bolts. Attach the filter housing to the bracket using the provided clamps or bolts, ensuring the filter is oriented correctly and all hose connections align without stress.
After installation, check that the filter is secure and does not vibrate excessively. Reconnect fuel lines and prime the system. Regular maintenance includes periodic inspection of the bracket for signs of corrosion, cracking, or loose bolts. Retighten bolts after the first 500 miles of operation to account for settling.
This bracket is engineered for long-term durability, but visual inspections during regular service intervals will ensure continued reliability.
This bracket is manufactured in an ISO 9001-certified facility using high-quality steel coils sourced from approved mills. The raw material is tested for chemical composition and mechanical properties to ensure it meets the required grade. The stamping process is carefully controlled to maintain precise hole positions and edge profiles.
Each bracket undergoes 100% dimensional inspection using calibrated gauges, and the surface finish is checked for coating thickness and adhesion. Random samples are subjected to salt spray testing (ASTM B117) for a minimum of 500 hours to validate corrosion resistance, and vibration testing to simulate real-world chassis conditions. The brackets are designed to meet or exceed OEM fatigue and strength requirements.
Our commitment to quality ensures a bracket that provides secure, lasting filter support, protecting the fuel system from damage and contamination. Backed by a comprehensive warranty, this bracket offers peace of mind for fleet operators and owner-operators.
Choose genuine quality for your fuel system mounting – choose the VG1540080027 OEM coarse filter bracket.
The VG1540080027 Coarse Filter Bracket is a small but critical component that ensures the reliable operation of your fuel filtration system. Its robust steel construction, precise fitment, and superior corrosion protection guarantee that the fuel filter remains securely mounted, preventing leaks, line stress, and potential engine damage caused by filter movement. It is the genuine solution you need.
By choosing this genuine OEM-quality bracket, you avoid the risks of bracket fatigue, mounting bolt failure, and filter misalignment that are common with inferior aftermarket parts. It is engineered for long-lasting performance, reducing maintenance downtime and safeguarding your engine from fuel contamination. The VG1540080027 delivers the reliability you expect from a genuine SINOTRUK Howo component.
Fleet operators will benefit from improved fuel system uptime, reduced risk of filter-related breakdowns, and lower overall maintenance costs. Owner-operators will gain confidence in their vehicle’s ability to handle rough roads and extreme climates without compromising filtration integrity. This bracket is the dependable choice for professionals who prioritize performance and longevity.
Invest in this OEM bracket and experience the difference that genuine quality makes. Its proven reliability and engineering excellence make it the smart choice for anyone who demands the best from their SINOTRUK Howo. The VG1540080027 sets the standard for filter mounting brackets.
Order your VG1540080027 Coarse Filter Bracket today and ensure your fuel system remains secure and efficient for miles to come.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
