- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The MZ690411 Oil Filter is a high-efficiency filtration component engineered to remove contaminants, soot, and abrasive particles from engine oil, ensuring optimal lubrication for SINOTRUK Howo heavy-duty trucks. As a premier supplier of genuine Sinotruk howo parts, we offer this oil filter as a direct OEM replacement, manufactured to the original equipment’s exacting standards. The filter features a high-density pleated synthetic media, a robust steel housing with an anti-drainback valve, and a reliable bypass valve, providing exceptional filtration efficiency, high dirt-holding capacity, and consistent oil flow under the extreme pressures, temperature fluctuations, and severe operating conditions typical of heavy-duty trucking.
This oil filter (OEM MZ690411) is essential for maintaining engine cleanliness, reducing wear on bearings, pistons, and camshafts, and extending oil change intervals. Its advanced media technology captures particles as small as 10 microns while maintaining low flow restriction, ensuring that the engine receives clean, pressurized oil at all times. The MZ690411 is built to endure the rigors of long-haul transport, off-road operations, and severe environmental exposure, delivering dependable service over thousands of miles.
OEM direct replacement • High-density synthetic media • Anti-drainback valve • Bypass valve protection
The MZ690411 Oil Filter is a critical component of the engine lubrication system, responsible for removing harmful contaminants such as metal particles, carbon soot, and sludge from the engine oil before it circulates back to critical moving parts. Engineered for SINOTRUK Howo trucks, this filter is a direct OEM replacement that guarantees correct fit, high filtration efficiency, and reliable oil flow. Manufactured to the original specifications, it ensures a seamless integration with the existing oil filter housing.
The filter element is constructed from high-quality synthetic media with a pleated design that maximizes surface area for superior dirt-holding capacity and extended service life. A robust steel casing protects the media from deformation under high oil pressures, while the anti-drainback valve prevents oil from draining out of the filter when the engine is off, ensuring immediate oil pressure upon startup. The built-in bypass valve opens in the event of a clogged filter, allowing unfiltered oil to continue circulating to prevent engine oil starvation.
This oil filter is essential for maintaining engine cleanliness, reducing wear, and extending the life of the engine. Its robust construction and precise engineering guarantee reliable performance over extended service intervals, meeting the rigorous demands of heavy-duty trucking. It is the direct replacement you can trust to keep your SINOTRUK Howo’s engine lubricated and protected.
The MZ690411 Oil Filter is specifically designed for SINOTRUK Howo heavy-duty trucks, including Howo A7, T7H, T5G, and other models that utilize this filter size and thread specification. It is compatible with the standard oil filter housing and mounting base, making it the ideal replacement for maintaining engine lubrication and protection.
This filter is suitable for a wide range of applications, including long-haul trucking, regional distribution, construction, mining, and agricultural operations. Its high filtration efficiency and robust construction ensure reliable engine protection even under sustained heavy loads and extreme operating conditions.
When replacing, always verify the thread size and outer diameter to ensure a perfect match. The MZ690411 is a direct-fit component that simplifies maintenance and restores original oil filtration performance.
Installing the MZ690411 Oil Filter is a straightforward procedure that requires standard tools. Begin by draining the engine oil and removing the old filter using a suitable filter wrench. Clean the filter housing mounting surface thoroughly, ensuring no old gasket material remains.
Apply a thin film of clean engine oil to the new filter’s gasket to ensure a proper seal. Hand-tighten the new filter until the gasket contacts the mounting surface, then tighten an additional ¾ to 1 full turn (or to the torque specified in the service manual). Do not overtighten, as this can damage the gasket.
After installation, refill the engine with the recommended oil and start the engine, checking for leaks around the filter seal. Run the engine for a few minutes, then turn it off and recheck the oil level. Regular maintenance includes replacing the filter at the manufacturer’s recommended intervals, typically at every oil change. Always replace with a new OEM filter to ensure continued protection.
With proper installation and regular replacement, this oil filter will provide years of reliable engine protection.
This oil filter is manufactured in an ISO 9001-certified facility using premium filtration media and high-quality materials. The media is tested for filtration efficiency, dirt-holding capacity, and flow restriction to ensure it meets or exceeds OEM specifications. Each filter is inspected for dimensional accuracy, seal integrity, and structural soundness.
We perform 100% visual inspection on every filter and conduct random sample testing for burst pressure, thermal stability, and oil compatibility. The anti-drainback and bypass valves are tested for proper operation under various pressure conditions. The steel casing is tested for corrosion resistance.
Our commitment to quality ensures a filter that delivers reliable engine protection, maintaining oil cleanliness and extending engine life while reducing maintenance costs. Backed by a comprehensive warranty, this filter offers peace of mind for fleet operators and owner-operators.
Choose genuine quality for your lubrication system – choose the MZ690411 OEM oil filter.
The MZ690411 Oil Filter is a vital component that ensures your engine receives clean, well-lubricated oil for optimal performance and longevity. Its high-efficiency synthetic media, anti-drainback valve, and robust construction guarantee reliable filtration, protecting your engine from abrasive wear and reducing the risk of costly repairs. It is the genuine solution you need.
By choosing this genuine OEM-quality filter, you avoid the risks of poor filtration, oil starvation, and premature engine wear that can occur with inferior aftermarket filters. It is engineered for long-lasting performance, reducing maintenance intervals and ensuring your engine runs smoothly and efficiently. The MZ690411 delivers the reliability you expect from a genuine SINOTRUK Howo component.
Fleet operators will benefit from extended engine life, reduced oil consumption, and lower maintenance costs. Owner-operators will gain confidence in their truck’s ability to handle heavy loads and extreme conditions without oil-related issues. This filter is the dependable choice for professionals who demand the best.
Invest in this OEM oil filter and experience the difference that genuine quality makes. Its proven reliability and engineering excellence make it the smart choice for anyone who values performance and durability. The MZ690411 sets the standard for oil filters in heavy-duty trucks.
Order your MZ690411 Oil Filter today and ensure your engine stays properly lubricated and protected for miles to come.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
