- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The J65F110122 40 Oil Filter is a premium-grade, heavy-duty spin-on filter designed to provide exceptional engine oil filtration for SINOTRUK Howo heavy-duty trucks. As a trusted supplier of genuine Sinotruk howo parts, we offer this oil filter as a direct OEM replacement, manufactured to the exacting standards of the original equipment. The J65F110122 40 filter features a high-density pleated cellulose media with a synthetic micro-fiber layer, a robust steel canister with a corrosion-resistant finish, a precision-engineered bypass valve, and a high-quality anti-drain back valve, ensuring superior contaminant removal, consistent oil flow, and reliable protection for the engine’s critical components under the extreme pressures, temperatures, and operating conditions typical of heavy-duty trucking.
This J65F110122 40 oil filter plays a vital role in maintaining engine oil purity, capturing harmful particles such as soot, metal wear debris, and carbon deposits that can accelerate engine wear. Its advanced media design offers high dirt-holding capacity and efficient filtration, helping to extend oil change intervals and reduce maintenance costs while ensuring optimal engine performance and longevity.
OEM direct replacement • High-efficiency pleated media • Bypass & anti-drain back valves • Robust steel canister
The J65F110122 40 is a spin-on full-flow oil filter designed to provide efficient filtration of engine lubricating oil in SINOTRUK Howo trucks. It replaces the original equipment filter with identical thread specifications, sealing surface dimensions, and bypass valve settings, ensuring a perfect fit and reliable performance.
The filter element consists of a high-grade pleated paper media reinforced with a synthetic micro-fiber layer. This construction provides excellent filtration efficiency, capturing particles as small as 10 microns while maintaining low flow restriction. The pleats are spaced uniformly to maximize surface area, increasing dirt-holding capacity and extending the filter’s service life.
The steel canister is manufactured from heavy-gauge steel and coated with a durable anti-corrosion finish to withstand underhood conditions. A precision-calibrated bypass valve is integrated to ensure continuous oil flow to the engine in the event of filter clogging, preventing oil starvation. Additionally, an anti-drain back valve prevents oil from draining out of the filter when the engine is off, ensuring immediate oil pressure at startup.
This oil filter is a direct OEM replacement, offering identical dimensions and performance characteristics as the original. Its robust construction and advanced filtration media make it an essential component for protecting the engine from wear and extending oil life.
The J65F110122 40 oil filter is specifically designed for SINOTRUK Howo heavy-duty trucks, including popular models such as Howo A7, T7H, and other series that utilize this filter in their engine lubrication systems. It is a direct interchange for the OEM filter, offering identical thread size, gasket diameter, and bypass valve pressure.
This filter is suitable for a wide range of applications, including long-haul transport, regional distribution, construction, mining, and off-road operations, where reliable oil filtration is essential for engine durability and uptime. It is also compatible with many aftermarket oil filter housings that accept the same spin-on specifications.
The J65F110122 40 is typically used during routine oil and filter changes. Always verify the thread size and gasket diameter before installation to ensure proper fit.
When replacing, inspect the oil filter housing for any damage, and lubricate the new filter’s gasket with clean engine oil to ensure a proper seal.
Installing the J65F110122 40 oil filter is a straightforward procedure that can be performed during an oil change. Begin by warming the engine slightly to thin the oil, then safely lift and support the vehicle. Place a drain pan under the oil filter and engine drain plug.
Using an oil filter wrench, loosen the old filter counterclockwise and remove it carefully, allowing the oil to drain. Clean the filter mounting surface on the engine block to remove any old gasket material or debris.
Apply a thin film of clean engine oil to the gasket of the new J65F110122 40 filter. Screw the filter onto the mounting stud until the gasket contacts the sealing surface, then tighten it an additional ¾ to 1 turn by hand (or to the manufacturer’s torque specification, typically 20-25 Nm). Do not over-tighten.
Refill the engine with the recommended oil quantity, start the engine, and check for leaks around the filter. Allow the engine to run for a few minutes, then turn it off and check the oil level, topping up if necessary.
Regular maintenance includes replacing the J65F110122 40 filter at every oil change interval, as recommended by the vehicle manufacturer (typically every 15,000 to 30,000 km, depending on operating conditions). Also, inspect the filter for signs of damage or leaks during routine checks.
The J65F110122 40 oil filter is manufactured in an ISO 9001-certified facility under stringent quality control standards. Each filter is produced using high-grade materials and is subjected to rigorous testing to ensure it meets or exceeds OEM specifications for filtration efficiency, burst strength, and durability.
The filter media is tested for particle capture efficiency, pressure drop, and dust-holding capacity using standardized methods (ISO 4548-12). The canister is inspected for structural integrity, and the bypass valve is calibrated to ensure it opens at the correct pressure. The anti-drain back valve is verified for sealing performance.
Our commitment to quality ensures that the J65F110122 40 delivers reliable, consistent engine protection, reducing the risk of premature wear, sludge buildup, and costly repairs. With a comprehensive warranty, this filter offers peace of mind for fleet operators and owner-operators alike.
Choose genuine quality for your engine oil filtration – choose the J65F110122 40.
The J65F110122 40 oil filter is a fundamental component that directly affects the longevity and performance of your SINOTRUK Howo truck’s engine. Its advanced filtration media, robust construction, and precision valves provide superior protection against wear-causing contaminants, ensuring clean oil circulates to all critical components.
By choosing this OEM-grade filter, you avoid the risks associated with inferior aftermarket alternatives, such as poor filtration, media collapse, and valve malfunction. The J65F110122 40 is engineered to deliver consistent, reliable performance, reducing engine wear, maintaining oil pressure, and extending oil change intervals.
Fleet operators will benefit from extended engine life, reduced maintenance costs, and improved fuel economy. Owner-operators will gain confidence in their vehicle’s reliability, knowing that critical engine protection is handled by a genuine part.
Invest in the J65F110122 40 Oil Filter and experience the difference that a genuine SINOTRUK Howo part makes. Its proven reliability and engineering excellence make it the smart choice for professionals who demand the best for their vehicles.
Order your J65F110122 40 today and ensure your truck’s engine receives the clean oil it needs for maximum performance and durability.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
