- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The FG9804550080/1 Filter is a premium-quality, high-efficiency filtration component engineered for critical fluid systems in SINOTRUK Howo heavy-duty trucks. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM-grade filter as a direct replacement for the original factory element. The FG9804550080/1 filter delivers superior contaminant removal for fuel, oil, or hydraulic systems, protecting vital chassis components – including fuel injectors, pumps, valves, and hydraulic actuators – from abrasive particles, moisture, and sludge buildup. Manufactured with advanced multi-layer filtration media, precision-engineered pleat geometry, and a durable corrosion-resistant housing, this filter ensures optimal flow rates, minimal pressure drop, and extended service intervals, keeping your HOWO truck performing at its peak in even the harshest operating environments.
The FG9804550080/1 filter plays a crucial role in maintaining fluid purity, preventing premature wear of expensive system components, and reducing overall maintenance costs. Its exact OEM specifications guarantee a perfect fit and straightforward replacement, making it the ideal choice for both routine servicing and emergency maintenance.
OEM direct replacement • Advanced multi-layer media • High dirt-holding capacity • Low pressure drop • Extended service life
The FG9804550080/1 is a high-performance filtration element designed for use in the fuel supply, engine lubrication, or hydraulic systems of SINOTRUK Howo A7 and T7H series trucks. This filter effectively captures and retains contaminants such as dirt, rust particles, metallic wear debris, and water, ensuring that the fluid circulating through your truck’s essential systems remains clean and free from abrasive impurities. This OEM-grade filter precisely matches the original part’s dimensions, thread configuration, bypass valve calibration, and filtration efficiency, delivering a direct drop-in replacement that upholds factory-level system protection.
Engineered with a sophisticated multi-layer filtration media composed of high-grade cellulose, synthetic fibers, and a microglass layer, the FG9804550080/1 offers excellent particle capture efficiency (up to 99.8% at rated micron size) while maintaining an exceptionally low pressure drop to ensure adequate fluid flow to injectors, pumps, and hydraulic actuators. The media is deeply pleated to maximize the effective filtration surface area, significantly increasing dirt-holding capacity and extending the filter’s service interval. A robust steel housing with an integral anti-drain-back valve and precision O-ring seal prevents fluid bypass and leakage, guaranteeing that all fluid passes through the active media.
The FG9804550080/1 filter incorporates a reliable bypass valve that opens when the differential pressure exceeds a preset threshold – typically due to cold-start conditions or a clogged filter. This safety feature ensures that fluid continues to flow to critical components even under extreme circumstances, preventing starvation while still protecting against the largest particles. Regular replacement of the filter at recommended intervals is still essential for maintaining optimal system protection and performance.
This filter is fully compatible with earlier FG9804550080 versions and is widely used in routine maintenance programs, scheduled overhauls, and emergency repairs. Its reliable construction and superior filtration performance help extend the operational life of fuel injection systems, engines, and hydraulic circuits.
The FG9804550080/1 Filter is engineered for use in SINOTRUK Howo A7 and T7H series trucks, including models ZZ4257, ZZ3257, and other variants equipped with compatible fuel, lubrication, or hydraulic filtration systems. It serves as a direct OEM replacement for the original filter and is fully backward-compatible with the earlier FG9804550080 version.
This versatile filter is suitable for a range of applications: as a primary or secondary fuel filter in common-rail and mechanical injection systems, as an engine oil filter in both four-stroke and two-stroke configurations, and as a return-line or pressure-line filter in hydraulic steering and suspension systems. Its high-efficiency media makes it particularly effective in protecting precision components such as injectors with extremely tight tolerances, high-pressure pumps, and servo-valves.
In demanding operating environments – including long-haul transport, construction, mining, agriculture, and municipal services – the filter is subjected to high levels of contamination, extreme temperatures, and vibration. The FG9804550080/1 is designed to maintain its structural integrity and filtration efficiency under these harsh conditions, ensuring reliable protection and consistent system performance.
When replacing a filter, always confirm the application (fuel, oil, or hydraulic) and cross-reference the original part number. The FG9804550080/1 covers the majority of Howo A7 and T7H fluid filtration requirements, making it a practical and versatile addition to any workshop or fleet inventory.
Replacing the FG9804550080/1 filter is a standard maintenance procedure that can be accomplished with common hand tools. Begin by locating the filter housing – typically positioned near the engine block, fuel tank, or hydraulic pump. Ensure the system is cool and depressurized before starting the replacement process.
For spin-on filter types, use a filter wrench to remove the old filter by turning it counterclockwise. For cartridge-style filters, remove the housing cover, extract the used element, and clean the housing interior with a lint-free cloth. Inspect the mounting surface and replace the O-ring or seal if it shows signs of wear. Apply a light film of clean fluid to the new seal to ensure proper seating.
Install the new FG9804550080/1 filter by hand-tightening it until the seal contacts the base, then tighten an additional 1/2 to 3/4 turn as specified by the manufacturer – do not overtighten, as this can distort the seal and cause leaks. For cartridge types, insert the new element, replace the cover, and torque to the recommended specification. Reconnect any hoses or fittings that were disconnected.
After installation, start the engine and check for leaks around the filter and housing. Run the engine for several minutes, then re-inspect for any seepage. For fuel filters, follow the vehicle manufacturer’s air-bleeding procedure to remove trapped air from the system before starting.
For optimal system protection, replace the FG9804550080/1 filter at the intervals specified in your truck’s service schedule – typically every 500–1,000 operating hours or annually, depending on operating conditions. In dusty or moisture-prone environments, more frequent changes are recommended. The filter’s high dirt-holding capacity extends its service life, but timely replacement remains essential to maintain maximum protection for your truck’s fluid systems.
The FG9804550080/1 Filter is produced in an ISO 9001 and ISO 14001-certified facility utilizing advanced automated manufacturing and testing equipment. The filter media is sourced from internationally recognized suppliers and is subjected to rigorous incoming inspection to verify its basis weight, thickness, permeability, and tensile strength.
Each filter undergoes comprehensive quality control procedures, including burst pressure testing (minimum 20 bar), collapse resistance verification, media integrity scanning, and seal leak testing. Samples from every production lot are subjected to filter efficiency testing per ISO 4548 (for oil) and ISO 19438 (for fuel), confirming that the filter meets or exceeds the specified 99.8% efficiency rating. The bypass valve is individually calibrated to ensure it opens at the correct differential pressure.
We stand behind the FG9804550080/1 with a comprehensive warranty against material and workmanship defects. Our commitment to quality ensures that every filter delivers the same reliable performance, precise fit, and system protection as the original SINOTRUK Howo part, giving you confidence in your truck’s fluid cleanliness and component durability.
Choose genuine quality for your filtration maintenance – choose the FG9804550080/1 Filter.
The FG9804550080/1 Filter is a critical component in the preventive maintenance strategy of every SINOTRUK Howo. Clean, contaminant-free fluids are the lifeblood of your truck’s fuel system, engine, and hydraulic circuits. Contaminated fluids containing dirt, metallic particles, or moisture can cause accelerated wear of precision components such as injectors, high-pressure pumps, and control valves, resulting in reduced performance, increased fuel consumption, and costly, unplanned downtime.
By replacing old, clogged filters with this genuine OEM-grade element, you restore the full filtration efficiency that your truck’s system was engineered to utilize. The FG9804550080/1 captures and retains abrasive particles and water, ensuring that only clean fluid reaches sensitive components. This not only extends the operational life of your truck’s critical systems but also helps maintain optimal power output, fuel economy, and hydraulic responsiveness.
Fleet managers will benefit from the filter’s high dirt-holding capacity and extended service intervals, which reduce the frequency of filter changes and associated labor costs. Owner-operators will appreciate the peace of mind that comes with knowing their truck’s systems are protected against the hidden damage of contaminated fluids.
Invest in the FG9804550080/1 Filter and safeguard your SINOTRUK Howo’s vital systems with the same quality that the manufacturer intended. Its superior filtration media, durable construction, and exact OEM specifications make it the intelligent choice for professionals who prioritize reliability, performance, and long-term value.
Order your FG9804550080/1 today and ensure your HOWO truck’s fluids remain clean, protecting your investment and keeping your truck on the road for miles to come.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
