- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The AZ222920007 Front Mounting Bracket is a precision-engineered, high-strength structural component designed for critical chassis mounting applications in SINOTRUK Howo heavy-duty trucks. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM-grade front mounting bracket as a direct replacement for the original factory component.
The AZ222920007 bracket provides robust support and precise alignment for essential driveline components including the transmission, engine mounts, and cab suspension systems. Manufactured from high-quality cast steel with a corrosion-resistant coating, this front mounting bracket withstands the extreme loads, vibration, and thermal stress typical of heavy-duty truck applications.
The AZ222920007 front mounting bracket is a vital component for maintaining driveline integrity and chassis stability. A worn, cracked, or deformed bracket can lead to component misalignment, excessive vibration, premature wear of driveline parts, and potential failure of critical systems.
This genuine OEM bracket restores proper structural support and ensures your HOWO truck operates reliably and safely.
OEM direct replacement • High-strength cast steel • Corrosion-resistant coating • Precision-engineered fit • Heavy-duty durability
The AZ222920007 is a front mounting bracket designed for critical chassis applications in SINOTRUK Howo A7, T7H, and other heavy-duty truck models. This bracket provides essential structural support and precise positioning for key driveline components including the transmission, engine mounts, and cab suspension systems.
Its OEM-grade construction replicates the original bracket’s dimensions, mounting hole positions, and structural geometry, ensuring a perfect fit and seamless integration with the truck’s existing chassis systems.
The bracket is manufactured from high-strength cast steel with a durable corrosion-resistant coating, providing exceptional load-bearing capacity, impact resistance, and protection against rust and environmental degradation.
The AZ222920007 features precision-machined mounting holes and a carefully engineered geometry that ensures accurate component alignment, even under the extreme forces and vibration typical of heavy-duty truck operation.
Its robust construction and exact fit contribute to driveline stability, smooth power transfer, and extended component service life.
Common symptoms of a failing front mounting bracket include excessive driveline vibration, component misalignment, unusual noises during operation, and visible cracks or deformation in the bracket structure.
Replacing a damaged bracket with the AZ222920007 restores proper structural support and alignment, protecting the driveline from costly damage. Whether you’re performing a major chassis repair or replacing a worn component, this bracket offers the quality, strength, and precision that SINOTRUK Howo professionals demand.
The AZ222920007 front mounting bracket is specifically designed for SINOTRUK Howo A7 and T7H series trucks, as well as other heavy-duty chassis that require this bracket for driveline and suspension mounting.
This bracket is used in critical mounting applications including transmission support, engine mounting, and cab suspension systems. It serves as a direct replacement for the original factory bracket and is compatible with all chassis that use this specific bracket configuration.
This mounting bracket is essential for applications involving heavy loads, frequent operation, and extreme operating conditions, such as long-haul transport, construction, mining, and off-highway use. In these demanding environments, the bracket is subjected to constant vibration, shock loads, and thermal cycling.
The AZ222920007 is engineered to withstand these harsh conditions, providing consistent structural support and component alignment. When replacing a bracket, it is important to inspect the mounting bolts, bushings, and adjacent components for wear – these parts often require replacement together.
The AZ222920007 is designed to work with the factory-spec hardware and mating components, ensuring proper clamp load and alignment. Replacing the bracket together with worn mounting bolts and bushings is recommended for optimal structural integrity.
For fleets with multiple HOWO trucks, this bracket standardizes chassis repairs, simplifying parts inventory and ensuring the correct component is available for scheduled maintenance or emergency repairs. Always verify the bracket location and mounting configuration on your specific truck, though the AZ222920007 is the standard front mounting bracket for numerous A7 and T7H chassis applications.
Replacing the AZ222920007 front mounting bracket is a moderately complex procedure that requires proper lifting equipment, torque tools, and careful attention to alignment.
This work should be performed by a qualified heavy-duty mechanic with access to the appropriate tools and equipment. Begin by safely raising the truck and supporting it on jack stands, ensuring the chassis is stable and secure.
Support the component attached to the bracket (transmission, engine, or cab suspension) using a suitable jack or support stand. Remove the mounting bolts securing the old bracket, taking note of any washers or spacers used. Carefully remove the old bracket, being careful not to damage adjacent components.
Clean the mounting surface on the chassis frame thoroughly, removing dirt, rust, and old thread-locking compound. Inspect the threaded holes for damage – if any are stripped, repair them using appropriate thread repair tools.
Position the new AZ222920007 bracket, aligning the mounting holes with the chassis frame and the supported component. Insert the bolts and torque them to the manufacturer’s specified values (typically 80-120 Nm for M12 bolts, depending on the application) using a crisscross pattern to ensure even clamping.
Verify that the bracket is correctly positioned and that the supported component is properly aligned. Check that all fasteners are torqued to specification and that there is no excessive movement or play in the mounting.
For maintenance, regularly inspect the bracket for signs of cracks, deformation, or corrosion. Check the mounting bolts for tightness during routine service intervals. The AZ222920007 is designed for long service life, but factors such as extreme loads, corrosion, and impact damage can eventually compromise its integrity.
If you notice excessive vibration, component misalignment, or visible damage to the bracket, replace it promptly to prevent further damage to the driveline or suspension system.
The AZ222920007 front mounting bracket is manufactured in an ISO 9001-certified facility using advanced casting, machining, and finishing processes. The cast steel is sourced from certified mills and undergoes chemical analysis to confirm its composition and mechanical properties.
Each bracket is produced using precision casting techniques and then CNC-machined to exacting tolerances, ensuring accurate mounting hole positions and proper fitment with the chassis. The bracket undergoes heat treatment to achieve the optimal balance of strength and ductility.
Every bracket undergoes a comprehensive series of quality checks, including dimensional verification, visual inspection for casting defects, and hardness testing. Random samples from each batch are subjected to load testing and durability simulation to confirm long-term reliability.
The corrosion-resistant coating is applied using an e-coat or powder coat process, ensuring excellent adhesion and protection against rust, road salts, and chemical attack.
We back the AZ222920007 with a comprehensive warranty against material and workmanship defects. Our rigorous quality control ensures that every bracket delivers the same fit, strength, and durability as the original factory part, giving you confidence in your chassis’s structural integrity.
Choose genuine quality for your chassis repair – choose the AZ222920007 Front Mounting Bracket.
The AZ222920007 front mounting bracket is a critical structural component that directly affects the integrity, alignment, and reliability of your HOWO truck’s driveline and suspension systems. A cracked, deformed, or missing bracket can allow critical components to shift out of alignment, leading to accelerated wear, vibration, and catastrophic failure of transmission, engine, or cab mounting systems.
By replacing a damaged bracket with this genuine OEM-grade component, you restore proper structural support and component alignment. The AZ222920007 is manufactured from premium cast steel with precision-machined mounting points, delivering the strength and accuracy required for reliable chassis performance.
Its robust construction and corrosion-resistant coating ensure long-lasting performance, even under the extreme conditions of heavy-duty trucking. This translates to stable driveline operation, reduced vibration, extended component life, and improved overall vehicle reliability.
Fleet operators will benefit from reduced chassis maintenance, fewer unscheduled breakdowns, and lower overall repair costs. Owner-operators will have peace of mind knowing their truck’s driveline is supported by a component that meets OEM specifications and is backed by a comprehensive warranty.
Invest in the AZ222920007 Front Mounting Bracket and ensure your SINOTRUK Howo’s chassis components remain securely mounted, properly aligned, and ready for the demands of the road.
Order your AZ222920007 today and keep your HOWO truck’s driveline stable, aligned, and reliable for miles to come.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
