- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The 712W25455-6013 Fuel Heater Under-Cab Wiring Harness (New Controller) is a premium, heavy-duty chassis electrical component engineered specifically for SINOTRUK Howo trucks, delivering reliable power and signal transmission between the fuel heater controller and the under-cab heating system. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM-grade under-cab harness as a direct replacement for the original factory unit. The 712W25455-6013 harness ensures correct pin mapping, stable communication with the new controller and dependable operation on Howo A7, T7H, HOWO 371 and HOWO 380 models.
Manufactured from high-strand copper conductors, heat-resistant thermoplastic insulation and a reinforced PVC outer jacket, the 712W25455-6013 Fuel Heater Under-Cab Wiring Harness is built to exact OEM dimensions. Its robust construction resists vibration, abrasion, diesel fuel, oil and temperature extremes, delivering dependable performance under the constant electrical loads and environmental exposure of commercial truck operation.
OEM 712W25455-6013 • New Controller fit • Heat resistant • Vibration resistant • Direct OEM fit
The 712W25455-6013 Fuel Heater Under-Cab Wiring Harness (New Controller) is a critical electrical component in the chassis fuel system of SINOTRUK Howo trucks. It connects the new-generation fuel heater controller to the under-cab heater element, temperature sensor and power supply, ensuring correct operation of the fuel heating system in cold weather.
This 712W25455-6013 harness is precision-manufactured to exact OEM dimensions. The copper conductors are sized for the correct current rating, the insulation is formulated for diesel fuel and heat exposure, and the molded connectors are sealed against dust and moisture. The harness includes all necessary terminals and protective sleeving for the under-cab environment.
Common signs that a fuel heater under-cab wiring harness needs replacement include a fuel heater that fails to activate, slow cold starting, blown fuses, melted or discolored insulation, corroded or burnt terminals and stored fault codes in the engine ECU. Fitting a new 712W25455-6013 harness restores reliable fuel heater control and cold-weather starting.
Whether you are repairing a faulty fuel heater circuit, replacing a damaged harness or carrying out preventive maintenance on a fleet of Howo trucks, the 712W25455-6013 Fuel Heater Under-Cab Wiring Harness delivers the quality, reliability and durability that SINOTRUK Howo professionals expect.
The 712W25455-6013 Fuel Heater Under-Cab Wiring Harness is designed for SINOTRUK Howo trucks, with primary compatibility across the A7, T7H, HOWO 371 and HOWO 380 series. It is a direct OE replacement, so it connects to the factory fuel heater element and new controller without modification.
This harness is essential in applications where cold-weather starting and fuel system reliability are critical, such as long-haul transport, construction, mining and municipal service in cold climates. In these duties, the harness must deliver stable current without voltage drop and resist vibration, fuel exposure, heat and contamination.
When replacing the fuel heater under-cab harness, it is recommended to inspect the fuel heater element, controller, fuse, relay and main chassis harness for wear or damage. The 712W25455-6013 is designed to work with the factory fuel heating system, ensuring correct current delivery and reliable operation.
For fleets with multiple HOWO trucks, standardising on the 712W25455-6013 Fuel Heater Under-Cab Wiring Harness simplifies electrical repair inventory and ensures the correct harness is available for scheduled maintenance or emergency repairs.
Replacing the 712W25455-6013 Fuel Heater Under-Cab Wiring Harness is a simple procedure that requires basic electrical knowledge and hand tools. This work should be performed by a qualified technician. Begin by disconnecting the battery negative terminal to prevent accidental short circuits.
Locate the under-cab harness near the fuel heater and controller. Disconnect the old harness from the heater element and controller, taking note of the routing and any retaining clips. Withdraw the old harness and inspect the connectors for corrosion, melting or damage.
Route the new 712W25455-6013 harness along the original path and secure it with the factory clips. Connect the plugs to the heater element and controller until they click into place. Reconnect the battery and test the fuel heater activation. Confirm correct current draw and heater operation.
For ongoing maintenance, periodically check that the harness is securely routed away from sharp edges, heat sources and moving parts, and that the connectors are clean and dry. If heater operation becomes intermittent, inspect the heater element and fuse before replacing the harness again.
The 712W25455-6013 Fuel Heater Under-Cab Wiring Harness is manufactured in an ISO 9001-certified facility using high-quality copper conductors and automated crimping processes. Raw materials are sourced from certified suppliers and undergo incoming inspection for conductor resistance, insulation thickness and terminal plating.
Each harness is assembled on precision lines and then tested for continuity, insulation resistance and high-potential withstand. The terminals are pull-tested to ensure secure crimps, and the outer jacket is inspected for correct fit and finish. Every unit is subjected to a functional current test before packing.
Random samples from each production batch undergo environmental testing, including thermal cycling, vibration, diesel immersion and fluid exposure, to validate long-term reliability in heavy-duty truck applications. These tests ensure the harness continues to perform in the harsh conditions experienced by SINOTRUK Howo vehicles.
We back the 712W25455-6013 with a comprehensive 12-month warranty against material and workmanship defects. Our rigorous quality control ensures that every fuel heater under-cab wiring harness delivers the same fit, function and durability as the original factory component.
The 712W25455-6013 Fuel Heater Under-Cab Wiring Harness is a vital component for maintaining reliable fuel heater operation, cold-weather starting and engine protection on your Howo truck. A faulty harness causes heater failure, fuel waxing and difficult starts, especially in low temperatures.
Manufactured from high-quality copper with heat-resistant insulation and sealed connectors, the 712W25455-6013 offers outstanding reliability, current stability and long-term durability. Its direct-fit design ensures straightforward installation and immediate compatibility with the factory fuel heating system.
Fleet operators benefit from reduced cold-start downtime, lower maintenance costs and improved vehicle availability. Owner-operators gain peace of mind knowing their fuel heater is powered by a harness that meets strict OEM standards and is backed by a comprehensive warranty.
Order the 712W25455-6013 Fuel Heater Under-Cab Wiring Harness (New Controller) today and keep your SINOTRUK Howo starting reliably in cold weather for years to come.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
