- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The 712W25441-6060 ESC Module (EBS 3.3 STD System) is a premium, heavy-duty chassis brake component engineered specifically for SINOTRUK Howo trucks, delivering advanced electronic stability control and precise brake pressure management. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM-grade ESC module as a direct replacement for the original factory unit. The 712W25441-6060 module ensures correct yaw control, stable communication with the ABS/EBS system and dependable performance on Howo A7, T7H and related heavy-duty models.
Manufactured from high-strength engineering plastics, corrosion-resistant electrical contacts and sealed connectors, the 712W25441-6060 ESC Module is built to exact OEM dimensions. Its robust construction maintains correct signal processing, resists vibration and temperature extremes and provides dependable performance even under the constant use and electrical loads of commercial truck operation.
OEM 712W25441-6060 • EBS 3.3 STD System • Sealed connectors • Vibration resistant • Direct OEM fit
The 712W25441-6060 ESC Module (EBS 3.3 STD System) is a critical electronic component in the braking system of SINOTRUK Howo trucks. It processes signals from wheel speed sensors, yaw rate sensors, steering angle sensors and brake pressure sensors to control brake pressure modulation, preventing wheel lock and maintaining vehicle stability during braking.
This 712W25441-6060 module is precision-manufactured to exact OEM dimensions. The circuit board is populated with high-quality components, the connectors are sealed against dust and moisture, and the housing is designed for a secure fit on the chassis. The unit is tested for correct signal output and reliable solenoid control.
Common signs that an ESC module needs replacement include ABS/EBS warning lights, uneven braking, wheel lock-up, loss of stability control, loss of communication with the brake system and fault codes stored in the ECU. Fitting a new 712W25441-6060 module restores proper braking control and vehicle safety.
Whether you are repairing a faulty ESC system, replacing a damaged module or carrying out preventive maintenance on a fleet of Howo trucks, the 712W25441-6060 ESC Module (EBS 3.3 STD System) delivers the quality, reliability and durability that SINOTRUK Howo professionals expect.
The 712W25441-6060 ESC Module (EBS 3.3 STD System) is designed for SINOTRUK Howo trucks, with primary compatibility across the A7, T7H, HOWO 371 and HOWO 380 series equipped with the EBS 3.3 STD braking system. It is a direct OE replacement, so it plugs into the factory harness and mounts in the original location without modification.
This module is essential in applications where braking safety and vehicle stability are critical, such as long-haul transport, construction, mining and municipal service. In these duties, the ESC module must maintain accurate brake pressure control, resist vibration and temperature extremes and ensure reliable communication with the ABS/EBS central unit.
When replacing the ESC module, it is recommended to inspect the ABS sensors, yaw rate sensor, steering angle sensor, brake chambers, relay valves, wiring harness and central EBS module for wear or damage. The 712W25441-6060 is designed to work with the factory brake system components, ensuring correct signal timing and reliable operation.
For fleets with multiple HOWO trucks, standardising on the 712W25441-6060 simplifies brake system repair inventory and ensures the correct module is available for scheduled maintenance or emergency repairs.
Replacing the 712W25441-6060 ESC Module is a moderately simple procedure that requires basic electrical knowledge and hand tools. This work should be performed by a qualified technician. Begin by disconnecting the battery negative terminal and releasing air pressure from the brake system.
Locate the ESC module on the chassis. Disconnect the multi-pin connector from the old unit, taking note of any locking tabs. Remove the mounting screws or release the clip holding the unit in place. Inspect the connector pins for corrosion or damage.
Position the new 712W25441-6060 module in the mounting bracket and secure it with the original hardware. Reconnect the multi-pin connector until it clicks into place. Reconnect the battery and clear any fault codes using a diagnostic tool. Test the braking system through all functions: ABS, EBS and stability control.
For ongoing maintenance, periodically check that the module is securely mounted and that the connector is free from moisture or dirt. If the braking system becomes intermittent, inspect the ABS sensors and relay valves before replacing the module again.
The 712W25441-6060 ESC Module is manufactured in an ISO 9001-certified facility using advanced electronics assembly and testing processes. Components are sourced from certified suppliers and undergo incoming inspection for electrical characteristics, solderability and mechanical fit.
Each module is assembled on automated lines and then tested for relay function, signal timing and current draw. The housing is inspected for correct fit and finish, and the connector is checked for pin alignment and retention. Every unit is subjected to a functional test that simulates brake pressure commands.
Random samples from each production batch undergo environmental testing, including thermal cycling, humidity exposure and vibration, to validate long-term reliability in heavy-duty truck applications. These tests ensure the module continues to perform in the harsh conditions experienced by SINOTRUK Howo vehicles.
We back the 712W25441-6060 with a comprehensive 12-month warranty against material and workmanship defects. Our rigorous quality control ensures that every ESC module delivers the same fit, function and durability as the original factory component.
The 712W25441-6060 ESC Module is a vital component for maintaining braking safety, vehicle stability and driver confidence on your Howo truck. A faulty ESC module causes ABS/EBS warnings, uneven braking and potential loss of control, especially in emergency situations.
Manufactured from high-quality materials with sealed connectors and robust electronics, the 712W25441-6060 offers outstanding reliability, moisture resistance and long-term durability. Its plug-and-play design ensures straightforward installation and immediate compatibility with the factory EBS system.
Fleet operators benefit from reduced brake system downtime, lower maintenance costs and improved vehicle safety. Owner-operators gain peace of mind knowing their brakes are controlled by a module that meets strict OEM standards and is backed by a comprehensive warranty.
Order the 712W25441-6060 ESC Module (EBS 3.3 STD System) today and keep your SINOTRUK Howo braking safely for years to come.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
