- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The 40050800133 Filter Element, Oil Filter is a premium replacement element designed for the oil filtration systems of SINOTRUK Howo heavy‑duty trucks, ensuring clean oil circulation and optimal engine protection. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM‑grade filter element as a direct replacement for the original factory cartridge. The 40050800133 filter element effectively captures wear particles, soot, and sludge, maintaining consistent oil flow to critical engine components, even under extreme operating conditions.
Engineered with a high‑density synthetic fiber media and a robust metal support core, the 40050800133 filter element delivers excellent filtration efficiency, removing particles down to 10 microns while ensuring low pressure drop. Its advanced pleat design maximizes surface area, extending service intervals and maintaining consistent oil flow throughout the element’s life.
OEM 40050800133 • Heavy‑duty application • 10‑micron efficiency • Synthetic media • Direct OEM fit
The 40050800133 is a premium oil filter element designed specifically for the oil filtration systems of SINOTRUK Howo trucks, including the popular A7, T7H, and mixer chassis, as well as other heavy‑duty models that require this element specification. This filter element plays a critical role in maintaining engine oil cleanliness, removing harmful contaminants such as soot, metal particles, and sludge that accumulate during normal operation.
The 40050800133 filter element features a high‑capacity synthetic fiber media that provides excellent filtration efficiency and high dirt‑holding capacity. The media is pleated to maximize surface area, ensuring long service life and low flow restriction. Its metal support core provides structural integrity, preventing collapse under pressure and ensuring consistent filtration performance throughout the element’s service life.
This filter element is designed to fit precisely into the factory oil filter housing, replacing the original cartridge. Its advanced design incorporates a bypass valve interface that ensures continuous oil flow even if the filter element becomes fully loaded, protecting the engine from oil starvation. The element is also compatible with the housing’s anti‑drainback valve, preventing dry starts by keeping oil in the filter housing.
Common signs of a clogged oil filter element include reduced oil pressure, increased engine noise, and dirty oil on the dipstick. Replacing the element with the 40050800133 restores proper oil flow and filtration, protecting the engine from premature wear and extending its service life. This OEM‑spec element is the ideal choice for routine oil changes and engine overhauls.
Whether you are performing scheduled maintenance or an emergency oil change, the 40050800133 Filter Element, Oil Filter delivers the quality, reliability, and filtration performance that SINOTRUK Howo professionals expect.
The 40050800133 filter element is specifically designed for SINOTRUK Howo trucks equipped with cartridge‑type oil filter housings, including the popular A7, T7H, and mixer chassis, as well as other models that use this element specification. It is a direct OE replacement and is fully compatible with all factory oil filter housings and mounting interfaces.
This filter element is ideal for applications that demand extended oil change intervals and superior contaminant removal, such as long‑haul transport, construction, mining, and heavy hauling. In these environments, engines operate under high loads, producing significant soot and debris that must be effectively filtered to prevent abrasive wear. The 40050800133 provides the filtration capacity and efficiency needed to keep oil clean and protect critical engine components.
When replacing the filter element, it is recommended to also replace the engine oil and inspect the filter housing for any debris or damage. The 40050800133 is compatible with all standard engine oils, including conventional, synthetic, and blended oils, offering flexibility for fleet operators.
For fleets with multiple Howo trucks, standardizing on the 40050800133 simplifies inventory management and ensures that the correct filter element is always available for scheduled maintenance. Always verify the filter element dimensions on your specific truck to confirm compatibility, though the 40050800133 is the standard oil filter element for most Howo heavy‑duty applications.
Replacing the 40050800133 oil filter element is a routine maintenance task that can be performed by most technicians using standard hand tools. Begin by running the engine to warm the oil, then safely raise the vehicle and place a drain pan under the filter housing.
Remove the filter housing cover or cap according to the vehicle’s service manual. Carefully withdraw the old filter element, taking note of its orientation and the position of any seals or O‑rings. Clean the inside of the housing thoroughly, removing any sludge or debris. Inspect the housing O‑ring or seal and replace if damaged.
Install the new 40050800133 filter element into the housing, ensuring it is properly seated and aligned with the locating features. Replace the cover or cap, tightening to the manufacturer’s specified torque. Refill the engine with the correct amount and grade of oil, then start the engine and check for leaks around the housing.
For maintenance, replace the oil filter element at every oil change interval, typically every 15,000‑20,000 km for heavy‑duty applications, or more frequently in severe service conditions. Always inspect the element for signs of collapse or excessive debris during removal, as this can indicate internal engine issues. Keep a log of filter changes to track maintenance schedules.
The 40050800133 filter element is manufactured in an ISO 9001‑certified facility using advanced pleating, bonding, and assembly processes. The synthetic filter media is sourced from leading global suppliers and is tested for efficiency, dirt‑holding capacity, and burst strength. The metal support core and end caps are formed from high‑grade steel with a corrosion‑resistant coating.
Each filter element undergoes rigorous quality control checks, including media integrity testing, dimensional verification, and flow testing. Random samples from each production batch are subjected to endurance testing on an engine test stand to validate filtration performance and structural durability over the element’s service life.
We back the 40050800133 with a comprehensive 12‑month warranty against material and workmanship defects. Our commitment to quality ensures that every filter element delivers the same level of protection and performance as the original equipment, giving you confidence in your engine’s longevity.
Choose genuine filtration for your Howo – choose the 40050800133 Filter Element, Oil Filter.
The 40050800133 Filter Element, Oil Filter is a vital component for protecting your Howo’s engine from the damaging effects of contaminants in the engine oil. A clogged or low‑quality filter element can lead to oil starvation, increased friction, and costly engine overhauls. By choosing this OEM‑spec element, you ensure that your engine receives clean, properly filtered oil at all times.
Engineered with high‑efficiency synthetic media, a robust metal support core, and precision fitment, the 40050800133 offers exceptional filtration performance and durability, making it ideal for the demanding conditions of heavy‑duty trucking. Its advanced design ensures consistent performance and protection throughout the service interval.
Fleet operators benefit from reduced engine wear, extended oil change intervals, and lower overall maintenance costs. Owner‑operators gain peace of mind knowing their engine is protected by a filter element that meets strict OEM standards and is backed by a comprehensive warranty.
Invest in the 40050800133 and ensure your SINOTRUK Howo’s engine delivers reliable power and long service life.
Order your 40050800133 today and keep your engine running clean and strong.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
