- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The 40050400241 Pilot Hydraulic Filter 58-10 is a premium, heavy‑duty filtration component designed specifically for the pilot hydraulic systems of SINOTRUK Howo heavy‑duty trucks. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM‑grade pilot hydraulic filter as a direct replacement for the original factory component. The 40050400241 filter effectively removes contaminants, particulates, and moisture from the pilot hydraulic fluid, protecting sensitive control valves, actuators, and pumps from wear and premature failure. Manufactured from high‑quality filtration media with a robust metal housing and integrated bypass valve, this filter delivers exceptional filtration efficiency, high dirt‑holding capacity, and reliable performance under extreme operating conditions.
The 40050400241 pilot hydraulic filter is essential for maintaining precise hydraulic control and preventing system contamination. A clogged or damaged filter can lead to sluggish steering, erratic boom movements, and costly hydraulic component repairs. This genuine OEM filter restores full hydraulic system protection and ensures your Howo truck operates smoothly and reliably under the most demanding loads.
OEM pilot hydraulic filter • High‑efficiency media • Integrated bypass valve • Robust metal housing • Easy installation
The 40050400241 is a high‑capacity pilot hydraulic filter designed for the hydraulic control systems of SINOTRUK Howo A7, T7H, and other heavy‑duty truck models. This filter is a critical component in the pilot hydraulic circuit, removing solid particles, water, and contaminants from the hydraulic fluid before they reach the steering control valves, suspension actuators, and other pilot‑operated devices. Its advanced multi‑layer filtration media ensures superior contaminant capture while allowing optimal fluid flow, maintaining precise hydraulic control and system responsiveness.
The filter features a robust, corrosion‑resistant steel housing that withstands high hydraulic pressures and harsh under‑chassis conditions. It incorporates an integrated bypass valve that opens in the event of excessive pressure drop, ensuring continuous fluid flow even when the filter element becomes clogged. The filter’s high dirt‑holding capacity extends service intervals, reducing maintenance frequency and operational costs.
The 40050400241 filter is a direct replacement for the original equipment, guaranteeing seamless integration with the existing hydraulic lines and mounting brackets. Its precision‑engineered design ensures a perfect seal and reliable filtration performance, contributing to reduced valve wear, improved steering feel, and extended hydraulic component life. The filter’s resistance to hydraulic fluid degradation and thermal cycling ensures consistent protection over thousands of hours of operation.
Common symptoms of a clogged pilot hydraulic filter include sluggish steering response, erratic suspension behavior, and increased hydraulic noise. Replacing the filter with the 40050400241 restores full fluid flow and system performance, preventing costly valve and pump repairs.
Whether you are performing scheduled hydraulic maintenance or addressing a performance issue, this filter offers the quality, precision, and reliability that SINOTRUK Howo professionals demand.
The 40050400241 pilot hydraulic filter is specifically designed for SINOTRUK Howo A7 and T7H series trucks, as well as other heavy‑duty models equipped with similar pilot hydraulic systems. It serves as a direct replacement for the original filter and is compatible with all pilot hydraulic circuits that use this specific filter size, thread type, and flow rating.
This filter is essential for applications involving frequent steering, suspension adjustments, and demanding operating conditions such as long‑haul transport, construction, mining, and heavy hauling. In these environments, the pilot hydraulic filter is subjected to high contaminant loads, pressure spikes, and thermal cycling. The 40050400241 filter is engineered to provide consistent, reliable filtration, reducing wear on hydraulic components and preventing unexpected failures.
When replacing the pilot hydraulic filter, it is important to inspect the hydraulic lines, fittings, and mounting bracket for any signs of wear or damage. The 40050400241 filter is designed to work with the factory lines and fittings, ensuring proper fit and sealing. It is compatible with both standard and heavy‑duty hydraulic configurations.
For fleets with multiple HOWO trucks, this filter standardizes hydraulic system maintenance, simplifying parts inventory and ensuring the correct component is available for scheduled service or emergency repairs. Always verify the filter size and thread type on your specific truck to confirm compatibility, though the 40050400241 is the standard pilot hydraulic filter for the majority of A7 and T7H applications.
Replacing the 40050400241 pilot hydraulic filter is a straightforward procedure that can be performed with basic hand tools. However, it is important to follow safety precautions, including relieving hydraulic system pressure and containing any spilled fluid. Begin by safely accessing the filter location, then remove the old filter using a suitable filter wrench. Clean the mounting surface and inspect the hydraulic lines for wear or damage.
Lubricate the new filter’s sealing gasket with a small amount of clean hydraulic fluid to ensure a proper seal. Install the new filter from the 40050400241 set, tightening it by hand until the gasket contacts the mounting base, then tighten an additional 3/4 to 1 full turn as specified by the manufacturer. Do not overtighten, as this may damage the gasket or housing.
After installation, start the engine and operate the steering and suspension controls to circulate fluid through the new filter. Check for leaks around the filter and connections. Run the system for a few minutes and re‑check for leaks. For maintenance, replace the pilot hydraulic filter at the manufacturer’s recommended intervals, typically every 500‑1000 operating hours or annually, depending on operating conditions. Always use a genuine replacement filter to maintain hydraulic system protection.
The 40050400241 pilot hydraulic filter is manufactured in an ISO 9001‑certified facility using advanced filtration media, assembly, and quality control processes. The filtration media is sourced from certified suppliers and undergoes rigorous testing for efficiency, dirt‑holding capacity, and burst strength. The steel housing is precision‑formed and coated to resist corrosion and hydraulic fluid degradation.
Every filter undergoes comprehensive quality testing, including dimensional verification, leak testing, and flow rate testing. The bypass valve is calibrated to ensure proper operation at the specified pressure differential. Random samples from each production batch are subjected to accelerated life testing and contaminant loading to confirm long‑term reliability.
We back the 40050400241 with a comprehensive 12‑month warranty against material and workmanship defects. Our rigorous quality control ensures that every filter delivers the same performance, fit, and durability as the original factory component, giving you confidence in your hydraulic system’s protection.
Choose genuine quality for your hydraulic system maintenance – choose the 40050400241 Pilot Hydraulic Filter 58-10.
The 40050400241 Pilot Hydraulic Filter 58-10 is a critical component for maintaining clean hydraulic fluid and protecting your HOWO truck’s pilot hydraulic system. Contaminated fluid can cause valve sticking, sluggish steering, and costly hydraulic component repairs. By replacing this filter with a genuine OEM‑grade component, you restore full hydraulic system protection and ensure precise control and responsiveness.
The 40050400241 is manufactured from premium materials with high‑efficiency filtration media and an integrated bypass valve, delivering the protection and reliability required for heavy‑duty trucking. Its precision‑engineered fit ensures a leak‑free seal and optimal flow, reducing pressure drop and maintaining system responsiveness. This translates to improved steering feel, smoother suspension operation, and extended hydraulic component life.
Fleet operators will benefit from reduced hydraulic system maintenance, fewer unscheduled breakdowns, and lower overall repair costs. Owner‑operators will have peace of mind knowing their pilot hydraulic system is protected by a filter that meets OEM specifications and is backed by a comprehensive warranty.
Invest in the 40050400241 Pilot Hydraulic Filter 58-10 and ensure your SINOTRUK Howo’s hydraulic system delivers the reliable, precise performance you expect.
Order your 40050400241 today and keep your HOWO truck’s hydraulic system clean, protected, and ready for any driving condition.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
