- ADDRESS：Jinan City, Shandong Province
- Wanda Plaza, Jinan, Shandong, China
- +8617615809553
- info@deruna.com
The 1301004 Water Pump Assembly is a precision-engineered, high-flow cooling system component designed specifically for SINOTRUK Howo heavy-duty trucks. As a trusted supplier of genuine Sinotruk howo parts, we offer this OEM-grade water pump assembly as a direct replacement for the original factory unit. The 1301004 water pump ensures optimal engine cooling by maintaining consistent coolant circulation, preventing overheating and extending the service life of your truck’s engine. Manufactured with a high-strength cast iron housing, a precision-machined impeller, and a durable sealed bearing system, this water pump delivers reliable performance under the most demanding operating conditions.
The 1301004 water pump assembly is a critical component of your truck’s cooling system, responsible for circulating coolant through the engine block, cylinder head, and radiator. Its robust construction and exact OEM specifications ensure a perfect fit and seamless integration, restoring full cooling efficiency and protecting your engine from the damaging effects of overheating.
OEM direct replacement • High-flow impeller design • Cast iron housing • Sealed bearing system • Easy bolt-on installation
The 1301004 Water Pump Assembly is a critical cooling system component designed for SINOTRUK Howo A7 and T7H series trucks, as well as other models equipped with the same engine platform. This complete assembly includes the pump housing, impeller, shaft, sealed bearings, and mounting flange, providing a ready-to-install solution for replacing a worn or failed water pump. Its OEM-grade construction replicates the original part’s dimensions, bolt pattern, and coolant flow characteristics, ensuring a perfect fit and optimal cooling performance.
The housing is cast from high-quality gray iron with a corrosion-resistant coating, providing excellent durability and thermal stability. The impeller is precision-machined from stainless steel or composite material (depending on variant) and features a carefully engineered vane geometry that maximizes coolant flow while minimizing cavitation and noise. The sealed bearing system uses high-temperature grease and double-lip seals to prevent coolant contamination and ensure long, maintenance-free operation.
The 1301004 water pump is driven by the engine’s serpentine belt via a robust pulley that is precision-balanced to reduce vibration and belt wear. The pump’s flow rate is optimized to meet the cooling demands of the high-output engines found in SINOTRUK Howo trucks, ensuring that even under heavy loads and extreme ambient temperatures, the engine remains within its optimal operating temperature range. This not only protects the engine from overheating but also contributes to improved fuel efficiency and reduced emissions.
Common signs of a failing water pump include coolant leaks from the weep hole, unusual noises (whining or grinding) from the pump area, and engine overheating. Replacing a faulty pump with the 1301004 assembly restores full cooling system function, preventing costly engine damage and downtime. Its complete, ready-to-install design eliminates the need to reuse old components, ensuring a reliable and time-efficient repair.
Whether you’re performing scheduled maintenance or responding to an unexpected cooling system failure, the 1301004 Water Pump Assembly offers the quality, performance, and durability that SINOTRUK Howo owners and technicians rely on.
The 1301004 Water Pump Assembly is specifically designed for SINOTRUK Howo A7 and T7H series trucks, as well as other models equipped with the same engine family (e.g., WD615, D10, D12 engines). It serves as a direct replacement for the original water pump and is also compatible with earlier revisions that use the same mounting and belt drive configuration.
This water pump is suitable for a wide range of applications, including long-haul transport, construction, mining, and municipal services, where the cooling system is subjected to high thermal loads and continuous operation. Its robust construction and high-flow design ensure that the engine remains within its optimal temperature range even under the most demanding conditions, protecting critical components such as cylinder heads, pistons, and turbochargers from thermal stress.
When replacing a water pump, it is recommended to also inspect and replace the serpentine belt, tensioner, and coolant if they show signs of wear. The 1301004 assembly is designed to work with the factory cooling system, including the radiator, thermostat, and expansion tank, ensuring seamless integration and optimal performance.
For fleets with mixed HOWO models, this pump covers a wide range of engine and chassis variants, simplifying parts inventory and maintenance planning. Always verify the engine model and belt configuration to ensure correct fitment, though the 1301004 is the standard replacement for the majority of Howo A7 and T7H water pump applications.
Replacing the 1301004 water pump assembly is a moderate-complexity task that requires basic mechanical skills and tools. Begin by safely raising the front of the truck and supporting it on jack stands. Drain the engine coolant into a clean container for disposal or reuse. Remove the serpentine belt by releasing the tensioner, then disconnect the coolant hoses from the pump.
Remove the mounting bolts securing the water pump to the engine block (typically 4–6 bolts). Carefully withdraw the old pump, taking care not to damage the mating surface on the engine block. Clean the mounting surface thoroughly with a scraper and solvent to remove any old gasket material or sealant. Inspect the bolt holes for damage and clean them with a tap if necessary.
Apply a thin layer of high-temperature gasket sealant to the new gasket (included with the assembly) and position it on the mounting surface. Install the new 1301004 pump, ensuring that the impeller rotates freely and that the pulley aligns with the belt drive. Insert and torque the mounting bolts to the specified value (typically 25–30 Nm) in a crisscross pattern.
Reconnect the coolant hoses and refill the cooling system with the correct type and mixture of coolant. Install the serpentine belt, ensuring it is properly routed over all pulleys. Start the engine and allow it to reach operating temperature, checking for leaks and verifying that the pump operates quietly and smoothly. Top off the coolant level as needed and bleed any trapped air from the system.
For maintenance, regularly inspect the water pump for signs of leaks (coolant around the weep hole), unusual noises, or belt wear. Replace the pump at the manufacturer’s recommended intervals (typically every 500,000 km or as part of a major service). The 1301004 is built for long-term reliability, but regular monitoring of the cooling system is essential for preventing overheating and engine damage.
The 1301004 Water Pump Assembly is manufactured in an ISO 9001-certified facility using advanced casting, machining, and assembly processes. The gray iron housing is cast to precise tolerances and heat-treated for optimal strength and dimensional stability. The impeller is CNC-machined and dynamically balanced to ensure smooth operation and consistent flow characteristics.
Each water pump undergoes a series of quality tests, including leak testing under pressure, flow rate verification, bearing run-out measurement, and noise/vibration analysis. The sealed bearings are tested for durability and resistance to coolant contamination. Random samples from each production batch are subjected to thermal cycling and endurance testing to simulate real-world operating conditions.
We back the 1301004 with a comprehensive warranty against material and workmanship defects. Our rigorous quality control ensures that every pump delivers the same performance, reliability, and fit as the original factory part, giving you confidence in your truck’s cooling system integrity.
Choose genuine quality for your cooling system maintenance – choose the 1301004 Water Pump Assembly.
The 1301004 Water Pump Assembly is a critical component that directly affects your engine’s cooling capacity, performance, and longevity. A failing water pump can lead to inadequate coolant circulation, causing the engine to overheat – a condition that can result in cylinder head warping, piston seizure, and catastrophic engine failure. Replacing a worn pump with this genuine OEM-grade assembly restores the full cooling system efficiency that your SINOTRUK Howo was designed to deliver.
The 1301004 is built with high-quality materials and precision engineering, ensuring that it can withstand the extreme thermal and mechanical stresses of heavy-duty truck operation. Its high-flow impeller and sealed bearing system provide consistent, reliable performance, reducing the risk of overheating and protecting your engine investment. By choosing this genuine part, you avoid the risks associated with inferior aftermarket pumps that may have poor fit, substandard materials, or shorter service life.
Fleet operators will benefit from the pump’s long service intervals and robust construction, reducing the frequency of cooling system repairs and the associated downtime. Owner-operators will gain peace of mind knowing that their engine is protected by a component that meets OEM specifications and is backed by a comprehensive warranty.
Invest in the 1301004 Water Pump Assembly and ensure your SINOTRUK Howo’s cooling system performs at its best, keeping your engine running cool, efficient, and reliable for miles to come.
Order your 1301004 today and protect your engine with the quality that SINOTRUK Howo owners trust.
We are a first-class heavy duty vehicles and spare parts supplier in China. which covers from engine, gearbox, cab, axle assemblies to main assembly accessories, electrical parts and other chassis parts like brake, clutch and steering parts.
A PROFESSIONAL CHINA TRUCK AND SPARE PARTS SUPPLIER
@Copyright DERUNA
